Notes

10 Misconceptions Your Boss Shares Regarding Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows or doors aren't aligned properly or are difficult to use.

You'll be wasting energy in the event that your double-glazed doors fail to function properly. This can also increase the likelihood of burglaries. Owen the Locksmith can repair your door lock at a reasonable price.

Snapped Key

It can be quite frustrating when a key snaps into the lock. It also poses an issue for security, since the door may not lock and leave you open to intrusion. Fortunately, there are quick fixes you can try to resolve the problem and get your door working properly once more.

Keep calm. If you panic and start poking around wildly you may end up pushing the damaged piece of the key even further into the lock, which could make the situation much worse.

Then spray double glazing repair near me -40 or another penetrating oil into the lock to help the broken piece slip out more easily. You can also use a screwdriver to help break up any pieces stuck that might be hindering the flow. If you have a piece of the key that is stuck out then grab it using a paperclip or other thin metal object and pull it. Both methods work, but be cautious not to push the broken piece of the key even further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as a hook extractor and Jigsaw blades can also be used for this purpose. If you don't have any of these handy, you can make use of needle-nose pliers to bend and create a hook. Additionally, a pair of tweezers can be used to grasp and pull out the last piece of the key that was broken.

If you're unable to pull the broken piece of key out, you can try using a lock de-icer. It's available at most hardware stores and works by freezing any moisture present within the lock.

If none of these methods are working then it's probably the time to contact a locksmith. Fitlocks experts can quickly fix issues such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms so that they are easier to operate. Get a double glazing repair via our website or give us a call to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. A professional locksmith is able to fix the cylinder. To fix the cylinder, locksmiths will need to tap it. This can be done with the hammer or other tool. However, the most effective method is to use a wire or a long match. The match or wire's end close to the keyway. The locksmith can then strike the lock in order to break it. This is far better than using a heavy hammer, which could cause damage to the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can happen when the cylinder block and cylinder head are made from different metals, such as cast iron and aluminium. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion is a different reason for cylinder fractures. When the cylinder head and the block of the cylinder are not maintained properly, this could lead to rusting or corrosion and cause them to expand at a a higher rate than they should. This can cause cracks over time.

If your uPVC window or door lock is rigid and requires a lot more pressure to turn, it could be due to a variety of reasons. This can be caused by a malfunctioning locking mechanism or misalignment as well as a worn-out handle.

It is a quick and inexpensive fix that most homeowners with double glazing can perform. A professional locksmith will usually be able solve this issue within a matter of hours of arriving at your home. They can replace the locking mechanisms, or change the window handles, and also change the gearboxes, based on your particular requirements. A professional locksmith will be able to provide you with a recommendation of the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. It's a small amount to pay for the peace-of-mind that comes from knowing your uPVC door is secured.

Broken Handle

Window handle locks have intricate mechanisms that deteriorate as time passes and use, so it's not a surprise that they can break. It can be difficult to determine the reason for the broken window handle lock and fix it correctly.

Repairing your damaged handle, regardless of whether it's the internal locking mechanism or latch, will improve the security of your uPVC door and reduce the risk of draughts. When you aren't doing it right, replacing or repairing the handle could be costly and may cause damage to the door's frame and lock It is therefore worth taking some time to make sure you do it right.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate, which is usually hidden by the cap of the screw to enhance the appearance. It is not recommended to lose any internal parts of the handle like the plates and levers on either side. Ideally, keep them in the same place so you can re-install them if needed.

Then, with another screwdriver take the screw off that connects the handle with the spindle at the back. Once the screw is loose, take the handle off and take the broken spindle out. Replace it with a new spindle, ensuring that it's the same length (you can purchase them online or at hardware stores). Screw it into the frame. Do not tighten the screw too much as this can cause damage to the handle and window frame.


Check that the new handle is correctly fitted, then close and test the handle. The hope is that it will function smoothly and you'll be able open your window once more.

While you're working on the handle, don't forget to check your uPVC windows are closing properly. If they don't, you could experience damp and draughts inside your home, as well as compromising your home's energy efficiency. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that operates an locking device within the frame of the window. The handle is attached to a central rod that activates a series of cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle has broken This can be a frustrating problem.

There are solutions to this problem. A reputable locksmith can swiftly and efficiently solve the issue. They will be able to remove the window handle using a tool that can remove the wheel part of the mechanism, where the spindle goes. This is done without damage to the handle or the window frame.

Once the wheel has been removed, the technician can inspect the spindle and determine what caused it to break. This involves breaking the spindle into its constituent parts and meticulously noting their general condition as well as any particular areas of damage or excessive wear. This procedure is usually done in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that might be obstructing its normal functioning. The spindle could be replaced or repaired. If it is being replaced the technician will need an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle is a precise fit with the handle.

If the spindle is damaged and cannot be repaired, it could need to be replaced entirely. Home centres sell generic substitutes, but if your window design is unusual you'll have to speak with a cabinet maker or woodworker who can recreate the exact piece. Once the new spindle is installed, it can be positioned to the handle by lining up the holes for screws in the handle with the frames existing screws. Once the new handle is in place, you'll be able to operate your uPVC window.

Read More: https://www.repairmywindowsanddoors.co.uk/sidcup-windowrepair/