Notes

Ten Reasons To Hate People Who Can't Be Disproved Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism become faulty? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

It is essential that the double glazed doors work smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

It can be frustrating when a key gets stuck into a lock. It's also potentially a security risk, as the door may not be locked and could leave you vulnerable to intruders. There are a couple of quick solutions you can use to fix the problem and get your door working again.

Remember to remain calm. If you panic you could end up pushing the damaged key further into the lock.

Next spray WD-40 or a different penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you have a piece of the key that's still sticking out, grab it with a paperclip or other thin metal object and pull it. Both methods work well, but be cautious not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges, which can be used to extract hooks and Jigsaw blades can also be used for this use. If you don't have any of these you can bend a hook with needle-nosed pliers. Also, a pair tweezers is a good way to grip and pull out the last piece of the key that was broken.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture present inside the lock.

If none of these solutions seem to work, it may be time to call a locksmith. The experts at Fitlocks can quickly solve problems like broken handles or broken keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms so that they are more easy to use. You can book a double-glazing repair online or call us to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. A professional locksmith can easily repair the cylinder. Locksmiths will need to tap the cylinder to repair it. They can do this with the hammer or any other tool, but the best way is to use an extended match or piece of wire. Then, position the end of the match or wire in the keyway. The locksmith will then hit the lock to crack it. This is better than using a hammer, which can damage the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder block and cylinder head are made from different metals, like cast iron and aluminium. When various metals heat up and cool down at different rates, it can create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion is a different reason for fractures in cylinders. When the cylinder head and the block of the cylinder are not properly maintained, it can cause corrosion or rust that could cause them to expand at a a higher rate than they ought to. This could lead to cracks in the future.

If your uPVC window or door lock is brittle and requires more pressure to turn it could be due to a variety reasons. A defective locking mechanism, misalignment or an old handle are the most common causes of this issue.

Fortunately, this is an easy and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith can usually solve the issue within one hour of arriving at your home. They can fix the locking mechanisms, or change the window handles and change the gearboxes, depending on your specific needs. A professional locksmith will be able to advise you of the most cost-effective option for your home. They can also suggest upgrades to high-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. It's a small amount to enjoy the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks may break. They have complex mechanisms that wear out over time. It isn't always easy to pinpoint the reason behind the broken window handle lock and then fix it properly.

If the issue is in the internal locking mechanism or the latch, fixing your broken handle will increase your uPVC double glazing door's security and allow you stop the draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

Screwdriver: With the window open, loosen the screw holding the handle. The screw should be located on the inside of the backplate, which is usually concealed by the cap of the screw to enhance the appearance. You should not be able to replace any internal parts of the handle like the levers and plates on either side. Keep them in the same order to make it easier to replace them if needed.

Then, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw on the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is loose, pull the handle out and take out the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Securely screw it into the frame. Do not tighten the screw too much as this could harm the handle as well as the window frame.

Close the handle and try it. It should function smoothly, and you will be able to open your window after a few times.

While you're working on the handle, don't forget to ensure that your uPVC windows are shut properly. If they aren't closing correctly, you could encounter draughts or damp in your home. It could also affect the energy efficiency of your home. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they can shut properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is especially typical in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the window frame. The handle is attached a central rod that triggers the mushroom-shaped locking cams that secure the window frame keep. If double glazing window repairs does not open after the handle has been turned, it is likely the spindle has been damaged. This can be a frustrating problem.


Fortunately there are steps that can be taken to rectify this issue. A reputable locksmith can swiftly and efficiently fix this problem. A professional locksmith will be able disassemble the handle of the window by using a tool to take out the wheel from the area where the spindle is located. This can be done without causing any damage to the handle or causing other damage to the window frame.

After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves breaking the spindle into its individual parts and carefully recording their general condition, as in addition to any specific areas of wear or damage. This process is usually performed by technicians in a clean environment.

The next step is to clean the damaged spindle. This helps eliminate any dirt or other debris that might be hindering its normal functioning. Following this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centers offer generic replacements, but if the style of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be attached to the handle by lining up the screw holes in the handle and the frame existing screws. Once the handle is set, you are able to operate your uPVC windows.

Read More: https://www.repairmywindowsanddoors.co.uk/staines-windowrepair/