Notes

Indisputable Proof You Need Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll be wasting energy in the event that your double-glazed doors fail to perform as they should. This also increases the risk of burglary. Owen the Locksmith can fix your door lock for an affordable price.

Snapped Key

If a key breaks within a lock, it can be incredibly annoying. It can also be a security risk, as it may expose you to burglars if your door is not locked. There are a few easy solutions you can use to repair the issue and get your door working again.

Be calm. If you panic you may end up pushing the damaged key piece further into the lock.

Next, spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also use the screwdriver to break up any pieces that are stuck. If you have a chunk of the key that is stuck, grab it with a paperclip or other thin metal object and pull it. Both methods work, but you must be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have one of these tools then you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grasp and remove the remaining piece of the key that was broken.

If you are unable to remove the broken piece of key Use a lock deicer. It's usually found in most hardware stores. It is used to freeze any water or ice that could be inside the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms so that they are more easy to operate. You can request repairs to your double-glazing online or call us to discuss your needs.

Broken Cylinder

A broken cylinder can pose a serious security risk. A professional locksmith is able to fix the cylinder. To fix the cylinder, locksmiths must tap it. They can do this using an hammer or another tool, but the best way is to employ an extended match or piece of wire. Then, position the match's tip or wire close to the keyway. The locksmith will strike the lock and break it open. This is much better than using a heavy hammer, which could cause damage to the lock.

Overheating is the most common reason for cylinder heads to crack. This can occur when the block and cylinder head are made of various metals such as cast-iron and aluminium. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.

Another possible cause for cracks in the cylinder is corrosion. If the cylinder block and head are not maintained in a timely manner they could corrosion or rust and cause them to expand faster than anticipated. This can cause cracks in the future.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be the result of many things. This can be caused by a malfunctioning locking mechanism or misalignment, and also a worn out handle.

Fortunately it's a simple and inexpensive fix for most double glazing owners. A professional locksmith can usually solve the issue within one hour of arriving at your home. They can fix the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A locksmith with experience will always be able advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which give you an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks could break. They have intricate mechanisms that become less effective over time. It isn't always easy to pinpoint the reason for the broken window handle lock and repair it correctly.

The issue could be related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing door's security and help you to stop drafts. Incorrectly repairing or replacing your handle can be expensive and could harm the door's frame as well as lock It is therefore worth taking some time to make sure you do it right.

With the window open then loosen the screw that secures the handle with the screwdriver. It should be located on the inside of the back plate, which is usually covered by a screw cover for aesthetic reasons. Be careful not to lose any internal components inside the handle, like the plates or levers on the opposite side of the spindle. Keep them in the same order to make it simpler to replace them in the event of a need.

Next, turn the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle that holds it to the internal spindle using another screwdriver. Once the screw is loose, you can remove the handle and take the broken spindle out. Replace it with a new spindle, ensuring it's the same length (you can find them online or in hardware stores). Screw it in the correct position. Don't over tighten the screw because this could cause damage to the handle and window frame.

Ensure the new handle is fitted after which you can close and test the handle. It should work smoothly, and you will be able open your window once more.

While you're working on the handle, don't forget to ensure that your uPVC windows are closing properly. If double glazing repair near me don't cause draughts and damp in your home as in addition to compromising the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is more common for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These types of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached to a central rod which triggers a set of cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism fails to open after the handle has been turned, it is likely the spindle is damaged. This could be a frustrating issue.

There are ways to fix this issue. A reputable locksmith can quickly and effectively address this issue. They can take apart the window handle using a tool to remove the wheel portion of the mechanism that is where the spindle is. This can be done without causing any damage to the handle or causing any other damage to the window frame.

Once the wheel is removed, the technician will examine the spindle to determine what has caused it to break. This involves disassembling the spindle, and then examining each component part, noting any wear or damage. The process is performed in a clean, well-lit room by highly skilled technicians.

Next, clean the damaged spindle. This will help get rid of any dirt or debris which might be preventing it from working normally. The spindle could then be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is similar in size to the original. He will then drill matching holes into both pieces. This will ensure that the spindle fits perfectly with the handle.


If the damaged spindle cannot be repaired, it could require replacement. Home centres sell generic substitutes but if the window design is unusual you'll need to contact a cabinet maker or woodworker who can recreate the exact piece. Once the new spindle has been installed it can be fitted to the handle by lining up the holes for screws in the handle with the frames existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Website: https://www.repairmywindowsanddoors.co.uk/crawley-windowrepair/