Notes

10 Top Mobile Apps For Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC window or door mechanism faulty? Maybe the handles on your uPVC windows or doors aren't aligned properly or are difficult to use.

It is crucial that your double-glazed doors work smoothly, otherwise you'll lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at an affordable cost.

Snapped Key

It can be quite frustrating when a key gets stuck into the lock. This can also be a security problem in that it can leave you vulnerable to a burglar if the door does not lock. There are a few easy fixes you can make to fix the problem and make your door work again.

Remember to remain calm. If you get scared and start playing around with your keys, you might just end up pushing the damaged piece of the key further into the lock, making the situation much worse.

Next spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also make use of a screwdriver to break up any stuck pieces that could be blocking the way. If you have a piece of the key stuck and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that could work in a pinch as a hook extractor and some jigsaw blades are also suitable for this function. If you do not have any of these handy, you can use needle-nose pliers to bend them and create hooks. Additionally, you can use a pair tweezers to grasp and pull out the last piece of broken keys.

If you're unable to pull the broken piece of key out, try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture that may be present in the lock.

If none of these solutions seem to work, it may be time to call a locksmith. Fitlocks experts can fix issues such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair via our website, or give us a call to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder to repair it. They can do this using an hammer or another tool, but the most efficient method is to use a long match or a piece of wire. The match or wire's end in the keyway. The locksmith can then strike the lock in order to break it. This is far better than using a heavy hammer that could damage the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can occur when the block and cylinder head are made of different metals, such as cast-iron or aluminum. Different metals can be heated and cool at different rates. This can cause localized hotspots to expand quicker than the rest.

Another possible cause of cylinder cracks is corrosion. When the cylinder head and cylinder block are not properly maintained, this can result in corrosion or rust and cause them to expand at a greater rates than they should. This could lead to cracks over time.

If your uPVC window lock or door is brittle or requires a lot of pressure to turn, this can be caused by a number of things. This can be caused by a malfunctioning locking mechanism or misalignment, or a worn-out handle.

Fortunately it's a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith will typically be able solve this issue within a matter of hours after arriving at your residence. Depending on double glazing repairs near me of your home they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective options for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection against burglars. It's a small price to pay for the security that comes with knowing your uPVC doors are secure.

Broken Handle

Window handle locks have complex mechanisms that become less effective with age and use, so it's no surprise that they can break. If yours fails it may be difficult to identify the cause of the issue and make sure that you repair it correctly.

Fixing the broken handle, whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing your handle can be expensive and could cause damage to the door's frame and lock, so it's worth taking some time to do it right.

Screwdriver When the window is open remove the screw that holds the handle. The screw should be located on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic reasons. Be careful not to lose any of the internal components within the handle, such as the plates or levers that are on either side of the spindle. Keep them in the same order to make it easier to replace if necessary.


Then, turn the handle to make it 90 degrees to the window frame. Finally, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once this is released, you'll be capable of pulling the handle away and pull out the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can find them online or at hardware stores). Screw it in the correct position. Be careful not to overtighten because this could damage the handle or the window frame.

Close the handle and try it. It should work smoothly and you'll be able to open your windows once again.

While you're working on the handle, be sure to ensure that your uPVC windows are shut correctly. If they're not closing properly, you could experience draughts and damp in your home as and also affecting the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is especially typical in uPVC tilt and turn windows. These kinds of windows require a handle which acts as a locking mechanism within the window frame. The handle is connected to a rod in the centre that triggers a set of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned it is possible that the spindle is broken This can be a frustrating problem.

There are solutions to this problem. A professional locksmith can quickly and effectively fix this issue. A professional locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel portion where the spindle is located. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

After removing the wheel the technician will inspect the spindle to determine the reason for its break. This involves disassembling the spindle and examining each component part, noting any wear or damage. This procedure is usually performed in a clean environment by skilled technicians.

Then, clean the damaged spindle. This will help get rid of any dirt or other debris that might be preventing it from functioning normally. After this, the spindle could be repaired or replaced. If it is replaced, the technician can take a dowel of a similar size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle is precisely matched to the handle.

If the damaged spindle can't be repaired, it might need to be replaced entirely. Home centres sell generic replacements but If the style of your window is unique then it will be necessary to contact a wood worker or cabinet maker who can duplicate the exact part for you. Once the new spindle is installed, it can be attached to the handle by line up the holes for screws in the handle and the frame existing screws. Once the handle is securely in place, you can use your uPVC windows.

Here's my website: https://www.repairmywindowsanddoors.co.uk/islington-windowrepair/