Notes

13 Things About Double Glazing Lock Repairs You May Never Have Known
Double Glazing Lock Repairs

The best locks for your windows and doors will stop burglars from getting into your home. They generally don't like breaking glass or slipping through open windows.

However, some double-glazing owners have experienced problems with their door or window lock after it's been installed. Fortunately, these issues are usually fixable and don't require to buy new double glazing.

Broken or damaged locks

If your uPVC window or door lock is damaged or defective or has a problem, a locksmith will fix it. They can repair the hinges, striker plates and locks on your double-glazed. They can also move the cylinder to fix any misalignment which could cause your handle to operate correctly.

If the key fits inside the lock, but it doesn't turn or is difficult to insert, the mechanism could be stuck. This could be due to grime or dirt getting stuck within the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is essential to make use of a dry lubricant like graphite or teflon instead of oil, which attracts dirt and adhere to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should work through the mechanism and the lock should be able to turn without difficulty.

A damaged lock can be caused by loose screws in the lock mechanism. They can loosen and fall out or break off completely and stop the lock from working properly. These screws can be tightened using a screwdriver, but be careful not to over tighten them. This could damage the internal components.

A faulty lock is dangerous for your family and you. This is particularly relevant if you have young children. It is possible for them to open the door without knowing, and this can allow them access to your home. If you're worried that this might happen, a vetted professional locksmith can help you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing that can fix all types of faulty and damaged mechanisms, handles, cylinders and lock systems for both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.

Handles that are damaged or faulty

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is a great choice for those worried about opportunistic thieves looking for ways to gain access to your home. Ask double glazing repair near me for antilift locks. They can be put in alongside your existing locks and ensure that your windows are securely shut.

Handle locks are often damaged or fail. They are the first thing a criminal will use to force open your window. The good news is that this is among the easiest parts to fix.

Modern handles made of aluminium and uPVC operate a multi-point locking system called Espagnolette that is designed to resist forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional feature on all new double-glazed window installations.

When a handle is faulty it's important to get this repaired as quickly as possible. A damaged handle can stop the window from closing correctly and also allowing drafts to enter. It could also be a weakness that thieves can exploit and put your family's possessions and your personal belongings at risk.

The process of repairing the failed mechanism starts with getting access to the window frame and then removing the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so a replacement can be sourced which matches the profile of the internal window frame mechanisms.

After the mechanism is replaced the handle can be put back together using the original screws. However, we recommend replacing them with more long screws since they provide the most secure fit. The final stage is to apply a coat of clear sealant in order to protect the handle from further rust. Once that's done your window will be fully operational again and at a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows aren't shut properly, draughts can get in, your home's security barriers will become weaker, and there is an increased chance of damp or water damage. Window hinges that fail or fail are a common occurrence and can be easily repaired.

If your uPVC windows won't open or close and close, it's likely hinges need to be replaced or repaired. While most window manufacturers require you to purchase a new window to solve this issue We can replace the hinges that are damaged and save you money.

Window hinges can be damaged by repeated use, or they are weakened over time by corrosion. If you have a broken window hinge, it's essential to take steps to avoid further damage. This includes not causing the window to close or open.

Knowing the type of hinge you have will help you find the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can be a huge issue for uPVC windows and doors. They can be a significant source of noise, and they can also allow water infiltration which could damage your windows.

To resolve this issue, first verify whether the pin barrel on both hinge halves is aligned. If it isn't then tap the headpin using a hammer in order to make a slight bend in the hinge barrel. This will help to keep the pin in place. Ask a friend to hold the doors while you take out hinge screws and hinges. Replace the hinges with those that are of the same size, and install the screws with glue. Finally put the hinges in place using clamps or weights while the glue sets.

After you have fixed the hinges, you can install the door again. You can also attach the handle. Replace the screws with wooden dowels of the same size as the screw that was used to ensure that they are compatible.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and heat in, they can become damaged over time. This can be the case with broken or damaged glass, as well as faulty locks. If not taken care of, it can turn into a major expense. It can also affect the appearance of your home and could lead to a loss of insulation, which is why it is essential to fix any damage as quickly as possible.

If the glass is broken but isn't shattered it is possible to fix it yourself with the proper tools and techniques. Make sure the area around the broken glass is free of debris so that any fragments don't cause injury or trip hazards. Then, you must remove any broken pieces and dispose of them appropriately. Apply masking tape to the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to adhering it to the wall is a good idea in the case of a window that has two panes. This will ensure you have enough space to finish your project.


Before applying the glue, wipe the surface of the damaged frame and the glass with a dry, clean cloth. Follow the instructions for application and curing times which may differ from product to. You may need to clamp the glass that has cracked with clamps made of lightweight materials designed to support fragile materials, depending on the angle.

After the adhesive has completely cure, carefully insert the glass into the window frame. Make sure it's in line with the frame edge and that there aren't gaps between the glass sash as well as the frame. Be careful not to bend the glass when you reinstall it because this could weaken the seal. This can lead to water infiltration or condensation.

Get in touch with a professional glazier, such as O'Brien(r) for an appointment to replace your glass if the window is completely broken. Leaving broken glass unattended can cause danger to pet and children, so it's essential to act fast.

Read More: https://www.repairmywindowsanddoors.co.uk/loughton-windowrepair/