Notes

9 Lessons Your Parents Teach You About Double Glazing Lock Repairs
Double Glazing Lock Repairs

Good locks on your windows and doors can stop burglars from gaining entry into your home. Generally, they don't like breaking glass or trying to wiggle through open windows.

Some double glazing owners, however, have had issues with their window or door lock after the installation. Fortunately, these issues can be fixed without having to purchase new double glazing.

Broken or damaged locks

If your uPVC door or window lock is damaged or broken, then a locksmith can fix it. They can fix hinges, striker plates and locks for double glazing. They will also be able to move the cylinder around to correct any misalignment issues that could be causing your handle to not work correctly.

If the key fits inside the lock but it won't turn or is difficult to insert, then the mechanism may be stuck. The dirt or grease could get stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant like graphite or Teflon and not oil, as oil attracts dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you should insert the key and try to turn it. The lubricant should work through the mechanism, and the lock should be able turn easily.

The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They can loosen and fall out or even break completely preventing the lock to work properly. A screwdriver can be used to tighten the screws however, caution must be taken not to tighten them too much, since this could cause damage to the internal components.

A broken lock can be hazardous for your family and you. This is especially true if you have small children. It is possible for them to unlock the door without your knowledge, and this can allow them access to your home. If you're worried that this might happen, a vetted professional locksmith can help you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair any type of defective and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.

Handles that are damaged or broken

Many double-glazed windows have a multi-point lock as part of the overall security package. This is an excellent option for those worried about criminals who are looking for ways to gain access to your home. Ask your locksmith about antilift blocks. These can be installed as an addition to the existing locks and help keep your windows firmly shut.

It's not uncommon for handle locks to become damaged or even fail - they are the first component of your window to be pushed open by criminals who want to break into. Fortunately, the good news is that this is one of the easiest parts to repair.

Modern handles made of aluminium and uPVC feature a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed window installations.

double glazing repairs is essential to fix a handle as soon as you can if it's damaged. Faulty handles can prevent the window from closing properly and also allowing drafts to enter. It can also be a flaw that thieves can take advantage of, putting your family's belongings and you at risk.

The process of fixing the failed mechanism starts with gaining access to the window frame and removing the damaged handle. The gearbox that opens the handle is then located and the model is identified so a replacement can be found that matches the profile of internal window frame mechanism.

Once the mechanism has been replaced, the handle can be fixed with the original screws - however, we usually recommend replacing them with longer ones because this will ensure the most secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further deterioration. After you've completed this step the window should be fully functional again at a fraction of the cost of replacing it.

Hinges that are broken or Faulty

If your windows aren't shut correctly, draughts may enter your home, the security barriers will become weaker, and there is the risk of damp or water damage. Broken or faulty window hinges are a common issue that can be fixed easily.

If you have a uPVC window that won't open or close it's likely that the hinges are broken or damaged and require replacement. A lot of window manufacturers will require you to purchase a new window unit to fix this simple problem, but we can replace the hinges and save you money.

Window hinges can be damaged by repeated use or weakened over time by corrosion. If you've got a broken window hinge, it's important to take precautions to prevent further damage. This means not causing the window to close or open.

The type of hinge you are looking for will help you locate the right parts to repair it. The most commonly used kinds of window hinges include Maco, Mila, Roto and many other brands. Consult a professional to avoid purchasing parts that won't work with your existing hardware. This can result in further damage.

A faulty hinge is a major issue for uPVC windows and doors. They can be a major source of noise, and they can also permit water to infiltrate your windows.

To fix this issue, first make sure that the pin barrel on both hinge halves is aligned. If it's not then tap the headpin using a hammer in order to create an incline in the hinge barrel. This will help keep the pin in place. Then, ask a friend to hold the door while you remove the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges and attach screws using glue. When the glue is drying, secure the hinges by using clamps or weights.

Once the hinges have been fixed after which you will be able to put back the door and re-attach the handle. It is recommended to replace the screws with the same length of dowels as the original screw so that they align with each the other.


Glass that is broken or is damaged

While uPVC windows do a great job of keeping cold out and warm in, they can become damaged over time. This can include broken or damaged glass and faulty locks. If left unattended, this can turn into a major expense. It can also affect the aesthetics of your home and can lead to loss of insulation, which is why it's crucial to repair any damage as quickly as you can.

You can repair the crack in your glass yourself if you have the proper tools and techniques. Make sure that the area around the broken glass is free of debris to ensure that fragments don't cause injury or cause a trip hazard. After that, take away all broken glass pieces and dispose of them in the proper way. Apply masking tape over the entire area. This will prevent glass shards from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to gluing it in place is an ideal option when you have windows that have two panes. This will ensure you have enough space to finish your project.

Before applying the glue wipe the entire surface of the broken frame and the glass with an unclean, dry cloth. Follow the curing and application directions that may differ from product-to-product. You may need to clamp the broken glass using clamps that are lightweight and designed to hold fragile materials, depending on the angle.

After the adhesive has cured, carefully install the glass inside the window frame. Make sure it's flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Be cautious not to flex the window as it's being put back in place, as this can weaken the seal and lead to condensation and water infiltration.

If you have a glass window that's completely shattered or has larger cracks, contact a professional glazier such as O'Brien(r) to arrange the replacement. It's crucial to act fast in the event of broken glass.

Read More: https://www.repairmywindowsanddoors.co.uk/maldon-windowrepair/