Notes

What Freud Can Teach Us About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism faulty? Maybe the window or door handles don't meet up correctly or are difficult to use.

You'll lose energy when your double-glazed doors do not work properly. This also increases the risk of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

If a key breaks in a lock, it can be incredibly frustrating. It can also be a security risk in that it can make you vulnerable to an intruder if the door is not locked. There are a few quick fixes you can try to repair the issue and make your door work again.

Be sure to remain calm. If you get scared and start playing around with your keys, you might just end up pushing the damaged piece of the key deeper into the lock, which could make the situation much worse.

Spray WD-40, or any other penetrating lubricant into the lock. This will allow the broken piece come out more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be hindering the flow. If you have a part of the key that is still sticking out then grab it using a paperclip or other thin metal object and pull it. Both of these methods work well, however, be careful not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these you can bend a hook using needle-nosed pliers. You can also make use of a pair of tweezers to grasp and pull out the remaining pieces of broken keys.

If you are unable to remove the broken piece of key, use a lock deicer. This is usually available at all hardware stores, and it works by freezing any moisture or ice that may be in the lock.

If none of these solutions seem to work, it could be time to consult a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also modify your double glazing door mechanisms to make them more user-friendly. Request a repair for your double glazing via our website, or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder poses an immediate security risk. Luckily, it's an easy repair for an expert locksmith to complete. A locksmith must tap the cylinder in order to repair it. This can be done with a hammer or other tool. However, the most effective method is to use a wire or a long match. Then, put the match's tip or wire near the keyway. After that, the locksmith can strike the lock to crack it open. This is far better than using a heavy hammer that can harm the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder head and block are made of different metals such as cast-iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localized hotspots to expand faster than the rest of the cylinder.


Another possible cause for cracks in the cylinder is corrosion. If the cylinder head and cylinder block are not properly maintained, it can lead to rusting or corrosion and cause them to expand at more than they ought to. This could lead to cracks in the future.

If your uPVC door or window lock is brittle or requires a lot of pressure to turn, this can be caused by a number of things. This can result from a defective locking mechanism or misalignment, as well as a worn-out handle.

It is a quick and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will usually solve the issue within one hour of arriving at the property. They can repair the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra security layer from burglars. It's a small price to pay for the security that comes with knowing your uPVC doors are secure.

Broken Handle

It's not surprising that window handle locks may break. They have intricate mechanisms which deteriorate over time. It isn't always easy to pinpoint the reason for the broken window handle lock and repair it correctly.

The issue could be in the internal locking mechanism or the latch, fixing the broken handle will improve your uPVC double glazing door's security and allow you to stop the draughts. It is costly to replace or repair your handle incorrectly and it can also damage the frame and the lock of your door.

With the window in the open position then loosen the screw that holds the handle using a screwdriver. The screw should be on the inside face of the back plate, and is normally covered by an aesthetically pleasing cover for the screw reasons. Be sure not to damage any of the internal components inside the handle, like the plates or levers that are on either side of the spindle. It is best to keep them in the same order so that you can re-install them when needed.

Next, turn the handle so it's at 90 degrees towards the window frame. Then, loosen double glazing repairs on the back of the handle that holds it to the internal spindle using another screwdriver. Once the screw is loose, take the handle off and take the broken spindle out. Replace this with a new one, making sure it's the same size as the previous one (you will typically find them online or in hardware stores) and screw it securely in place. Do not tighten the screw too much as this can cause damage to the handle and window frame.

Check that the new handle is fitted Close the window and test the handle. It should function smoothly, and you will be able open your window after a few times.

While you're working on the handle, make sure to make sure your uPVC windows are closing properly. If they're not, you could experience damp and draughts inside your home as and also affecting the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they can shut properly.

Broken Spindle

It is often the case that the spindle within a handle breaks rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These types of windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod that triggers the locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle has been turned, it is likely the spindle is damaged. This can be a frustrating issue.

There are solutions to this issue. A reputable locksmith will be able to quickly and effectively address this issue. They will be able to remove the window handle using a tool that removes the wheel portion of the mechanism that is where the spindle is. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel is removed, the technician can inspect the spindle and determine what has caused it to break. This involves breaking the spindle into its individual parts and meticulously noting their general condition, as well as any particular areas of wear or damage. The process is carried out in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle, this will remove any debris or dirt that might be hindering its normal operation. After that the spindle could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is comparable in size to the original. Then, he will drill matching holes into both pieces. This will ensure that the new spindle has precisely matched to the handle.

If the damaged spindle cannot be repaired, it might require replacement completely. Home centers can sell generic replacements however if your window design is unique you'll need to contact an expert in cabinet making or woodworking who can replicate the exact part. Once the new spindle is installed, it can be positioned to the handle by line up the screw holes in the handle with the frame's existing screws. Once the handle is firmly in place, you can use your uPVC windows.

Homepage: https://www.repairmywindowsanddoors.co.uk/peterborough-windowrepair/