Notes

15 Reasons To Not Ignore Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism broken? Perhaps the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It is essential that your double-glazed doors function smoothly, or else you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at reasonable costs.

Snapped Key

When a key snaps off inside a lock, it could be incredibly difficult. It could also be a security risk since the door might not lock and make you vulnerable to intruders. There are fortunately quick fixes you can attempt to fix the problem and get your door operating properly once more.

Keep calm. If you panic and begin poking around wildly you could end up pushing the damaged piece of the key even further into the lock, making the situation much worse.

Spray WD-40, or any other penetrating lubricant, into the lock. This will allow the broken piece be removed more easily. You can also use a screwdriver to break up any pieces stuck. If you have a chunk of the key that's still sticking out, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges that could be used as hook extractors and some Jigsaw blades can also be used for this purpose. If you don't have one of these tools, you can bend a hook with needle-nosed pliers. Additionally, you can use a pair of tweezers grasp and pull out the remaining pieces of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It is available at all hardware stores. It works by freezing any water or ice that could be inside the lock.

If none of these methods are working you, it's the time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also modify your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair through us online, or give us a call to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. It's a good thing that it's a simple repair for professional locksmiths to complete. To repair the cylinder, locksmiths must tap it. This can be done using the hammer or other tool. However, the most effective method is to use a wire or a long match. Position the match or the wire's end in the keyway. After this, the locksmith will hit the lock to break it open. This is better than using a hammer that could harm the lock.

The most frequent cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and the cylinder head are made of various metals, such as cast-iron or aluminum. Different metals will be heated and cool at different rates. This can cause localized hotspots to expand faster than the rest of the cylinder.

Corrosion can be a cause of fractures in cylinders. If the cylinder block and head are not maintained correctly they may rust or corrode and cause them to expand faster than expected. Over time, this can also lead to cracks.

If your uPVC door or window lock is brittle or requires a lot of pressure to turn, it could be due to a number of things. A faulty locking mechanism, misalignment, or an old handle are the most common reasons for this issue.

This is a straightforward and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will usually fix this problem within one hour of arriving at your property. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, and also change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which offer an additional security layer from burglars. It's a small price to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks have complex mechanisms that deteriorate with time and use, so it's not a surprise that they can break. If yours is damaged it may be difficult to determine the source of the issue. Make sure that you repair it correctly.


Repairing your damaged handle, regardless of whether it's the internal latch or locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. If you do not repair or replace your handle can be costly and may harm the door's frame as well as lock, so it's worth taking some time to do it right.

With the window in the open position then loosen the screw that secures the handle by using the screwdriver. The screw should be on the inside of the backplate, usually concealed by a screw cap to enhance the appearance. It is not recommended to lose any internal parts of the handle like the plates and levers on either side. Ideally, keep them in the same place so you can replace them again in the event of a need.

Next, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle using another screwdriver. Once the screw is free, you can remove the handle and take out the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can buy them on the internet or in hardware stores). Screw it in the frame. Be cautious not to overtighten as this could cause damage to the handle or the window frame.

Make sure the new handle is fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able to unlock your window.

Make sure to check that your uPVC window is closing properly when you're working with the handle. If they aren't closing properly, you could experience damp or draughts in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is most typical in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the frame of the window. The handle is connected to a central rod that activates a series of locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism does not open when the handle is turned, it is likely that the spindle has broken This can be a frustrating problem.

Luckily, there are steps that can be taken to rectify this issue. A good locksmith will be able to quickly and effectively address this problem. A good locksmith can disassemble the handle of the window by using a tool to take out the wheel part where the spindle is located. This can be done without damage to the handle or window frame.

After removing the wheel the technician will inspect the spindle and determine the reason for its break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This procedure is usually carried out in a clean, well-lit room by highly skilled technicians.

Next, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from functioning normally. After this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is similar in size to the original. Then, he will make holes in the same way into both pieces. double glazing window repairs will ensure that the spindle will fit perfectly with the handle.

If the spindle is damaged and cannot be repaired it may require replacement completely. Home centers sell generic replacements, but If the style of your window is unique then you will need to speak with a woodworker or cabinet maker who can duplicate the exact model for you. Once the new spindle has been installed it can be fitted to the handle by lining up the screw holes on the handle and the frame existing screws. Once the handle is firmly in place, you can use your uPVC windows.

Homepage: https://www.repairmywindowsanddoors.co.uk/twickenham-windowrepair/