Notes

10 Things We Hate About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this instance you'll need source some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.


It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your property until a professional is able to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repair s you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, causing an opening between the frame and sash. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it's possible to give them a clean but in certain cases, it may be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.

Here's my website: https://www.repairmywindowsanddoors.co.uk/rochester-windowrepair/