Notes

The 10 Most Terrifying Things About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However, if you have double-pane windows that are anchored by internal beading it will be more difficult to take out the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging


uPVC is a durable and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows to get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you aren't able to move the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to give suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. This should be done at least every year. window repairs near me or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges may also become unbalanced due to wear, creating gaps where the sash meets frame. They can be repaired by giving them good clean, but if they are beyond repair it could be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. However, it is important to realize that windows last for a certain period of time and there may come an point at which it is more efficient to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.

My Website: https://www.repairmywindowsanddoors.co.uk/iver-windowrepair/