Notes

10 Facts About Repair Patio Door Lock That Insists On Putting You In Good Mood
How to Repair a Bad Patio Door Lock

A secure patio door is crucial to home security. It can be difficult when it isn't easy to lock.

A stubborn lock can be the result of misalignment or even simple wear and wear and tear. Lubricating the lock, or adjusting its position may help to restore its function. If these troubleshooting methods aren't working, you can replace the mortise lock and handle.

Clean and Lubricate

Over time, dust, dirt and grime can make it difficult to open or close a door lock. Regular cleaning and lubrication could help to prevent your security device from becoming stiff or stuck. This will save you money in repair costs and prolong the life of your door.

To begin, you'll need to clean the lock's the cylinder. To do this, you'll need a spray can of penetrating oil such as WD-40. Spray a small amount of oil into the keyhole and then rotate the key to spread the oil. Avoid using patio door repair or other oils that could damage your locks. Also, make sure you spray some on the key itself as well.

After cleaning your lock cylinder it's time to grease. You can use dry lubricants such as graphite powder or sprays of silicone. Graphite is a lubricant that lasts for a long time that doesn't attract dust unlike liquid oils. It's a great choice for lubricating locks. Silicone sprays are water resistant and can withstand both moist and freezing temperatures, but may require several coats to work effectively.

You can also use a de-icer spray that is made for cold weather. It will remove the frost and ice from the lock mechanism. This will allow you to unlock your lock and then relock it more easily.

How often you should lubricate your locks will rely on the environment. The location of your door will affect its performance. A location near the coast could expose the door to salty air, which could cause corrosion. It is recommended to regularly lubricate your locks at least once every year, or more frequently in areas with harsh weather conditions. Lubricating your locks will save you money on repairs and ensure that your patio door continues to function as it should for many the years to come.

Reposition the Lock Cylinder

If your patio door lock isn't functioning correctly, it could indicate that one or more parts are damaged or misaligned. Regular inspections and timely repairs of a faulty lock on your patio door can stop further damage and increase the security of your doors. To repair a locked or unlocked patio door, tighten loose screws, adjust the lock mechanism or replace the lock cylinder.

Begin by inspecting the exterior and inside of the lock to find signs of damage or misalignment. Patio door locks may expand or contract depending on the weather, and may even shift over time. This slight movement can cause the locking mechanism to be misaligned and cause problems when opening or closing the door.

Next, examine the lock cylinder to find any obstructions in the keyway hole. A corroded or obstructed lock cylinder could be difficult to open and may cause damage to the latch springs, cam, or lock pins. If the cylinder isn't fitting easily, you can clear any obstructions using a pair picklocks and tweezers. If the issue persists it may be necessary to take the cylinder out and disassemble it to locate the source of the obstruction.

If the lock cylinder isn't screwed into the body of the lock, you can loosen it by unscrewing an elongated screw within the faceplate of the cylinder. This screw will allow you rotate the cylinder, and may even help restore the alignment.

Examine the cylinder for a little tab that can move up and down with the key, typically towards the very end. This tiny clip, also known as a "release Tab", prevents the cylinder from sliding into the lock body in the entire way. A standard key will slide this tab back to let the cylinder out and allow it to be removed and put back in.


If your lock cylinder is stuck and is not aligned, you can fix it by rotating the cylinder until the latch bolt engages the strike plate. The knob or handle can then be pulled and pulled back. After you have restored the proper alignment, reassemble the lock and check its functioning. If your patio door lock is still difficult to use, it's likely that a different component, such as the latch or latch spring is worn or damaged and will need to be replaced.

Lock the Screws

The locks on patio doors can be damaged by regular use, extremes of temperature dust, dirt and. If not properly maintained these delicate components can get worn out and cause your door to fail to lock properly. Fortunately, most lock issues are easily fixable with just a few simple maintenance steps.

It is recommended to first clean the lock mechanism. Use a damp cloth to clean any dirt or dust that may be present, and then dry the parts thoroughly. After cleaning, a small amount of silicone-based lubricant will help keep the moving parts operating smoothly and efficiently. Avoid lubricants with oil bases since they could draw dust and dirt and cause additional problems.

If your patio door comes with a security footlock, ensure that the footlock is aligned correctly with the strike plate. Most of the time, this will require you to adjust the screws that attach your foot lock to the frame of the patio door. To adjust the footlock you need to loosen the screw using a Robertson screwdriver and gently pull it upwards or downwards. Once the adjustment is complete you can tighten the screw.

The most frequent issue when it comes to fixing patio door handles is misalignment of the strike plate and latch. This can be caused by the wear and tear of everyday use or it could be that the latch is set higher or lower than it ought to be.

Begin by removing the handle, then find the bolts or screws that secure it. Be sure to keep track of these since you will need them later when installing the new handle. Then, take off the old spindle, and then slide the new one into place on the side of the door, making sure that it is aligned with the holes in the exterior and interior handles. Reinstall the interior and external handles once the spindle has been installed. Make sure that they are properly aligned with the screws or bolts holding them in place.

Once you've made any necessary adjustments to your patio door, be sure to test it by locking and closing the door. If the door is correctly aligned, it will open and close smoothly without the need for any additional force. If you're having difficulty it could be necessary to reposition the strike plate or latch or the lock cylinder may be damaged and must be replaced.

Replace the Latch

If your patio door locks are not working, it may be time to replace the lock. Most homeowners can replace a lock themselves. Start by sliding the patio doors completely out and removing the existing lock from the inside of the door. Be sure to study the way in which the current lock is screwed to the door and the jamb so that you can get a sense for what type of lock you'll have to purchase.

Before installing the new latch, loosen the screws that hold the strike plate. This is the part of the lock that is positioned on the edges of the door's frame. Adjust it horizontally or in the vertical direction to align it with the latch hole. After you've adjusted the strike plate, screw it back into its place and tighten the screws.

After all the components have been repositioned or changed, assemble and secure the patio door according to the instructions of the manufacturer. When you're done, test the latch to make sure that it fits and is able to catch the latch's hasp when the door is closed. If it does, then your patio door lock has been installed correctly and is now ready to provide the security and privacy you've come to expect from.

Like other parts of your home, your patio doors need to be properly aligned in order for them to work efficiently. Over time, temperature, cold, dirt, and debris can cause the hinges and door frame to shift. Misaligned hinges, door frames, and locking mechanisms are like trying to put keys into the wrong keyhole. It's not working. You can fix an issue that appeared impossible by following these easy steps. Do yourself a big pat on your back for tackling the job and reclaiming your patio door's closed position! We bet that you'll have no issues opening or closing your patio door once more. Good luck! We are here to help if you need any assistance or have any questions.

Read More: https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-corby/