Notes

How To Solve Issues Related To Patio Door Lock Repair
Patio Door Lock Repairs

Over time, patio doors go through wear and tear that could result in locks that fail. There are a few easy steps you can follow to ensure the security of your uPVC door.

These simple fixes can make your home safer regardless of whether you re-align the lock or clean the locking mechanism.

Clean the Lock

Patio doors are ideal for letting the outdoors inside and keeping the elements out. However, they can be risky for security when the lock isn't functioning correctly. Over time, wear, tear, cold and hot weather, dirt, and debris can cause your patio door lock to become difficult to operate. With a little effort you can ensure that your patio door's lock is always working correctly.

In the beginning, it's essential to clean the lock of your patio door and all its moving parts. This will help remove any dirt or coatings that could be preventing your lock from working correctly. Start by wiping all the moving parts of the lock for your patio door with an aqueous cloth. Then apply a scouring pad or rough damp cloth to scrub the dirt-infested areas of the door frame and frame. Then, wipe the entire lock with dry cloth to get rid of any remaining dampness and let it to air dry before applying it to the next time.

If your patio door uses pin-tumbler locks you can lubricate it by applying powdered Graphite to the key. You can also use a Teflon lubricant such as WD-40 Multi Use Product. This type of lubricant can be easy to apply, and doesn't break down over time. If you are unable to find the correct lubricant for your lock, make use of a pencil with a larger tip. Put the pencil into the lock and jiggle it around a bit to spread the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors clear from dirt, dust and other debris. These tracks are especially susceptible to ice, snow, and other debris, which could cause them to block or become stuck. This could make it difficult for your patio door to be opened and closed.

You can clean the track rails and rollers on sliding patio doors by removing any weather stripping that is damaged or dirty. Clean sliding patio door repair , then replace it. The same can be done for patio door rollers, which can be wiped down and sprayed with non-stick lubricant in order to allow them to move freely.

Lubricate the moving parts

uPVC french doors, similar to sliding patio doors, work with 3-4 or sometimes 5-point locking mechanisms that include the handle and lock cylinder operated by keys. These doors require maintenance, lubrication of the moving parts. This can be done with a thin oil (never WD40) and is recommended to be done at least once per year.

If sagging hinges aren't the reason, the door could be misaligned and catching or striking the strike plate's hole in the frame. Remove the strike plate and employ a sharp tool enlarge its mortise. This will allow the latch to fit properly into the hole, and stop it from scratching against the frame.

While the cylinder is out of the way and out of the way, measure its width using a book or piece of wood that will fit in the adjustment screw gap above the lock. The outer dimension is the distance from the outside of the door to the middle of the cylinder, and the inner measurement runs from the center of the adjustment screw until the end of the cylinder.

Check the lock's width

If your patio door latch isn't able to turn even after cleaning and lubricating, it's possible that it is out of alignment with the strike plate hole. Verify that the door is in balance and if the hinge screws are tight However, in many cases shifting the strike plate up or down can fix the issue.


Most of the time, the issue occurs when the lock's strike is too small for the latch to properly engage. In this instance you'll have to increase the hole using either a hammer or chisel, and then test the latch to make sure that it connects to the strike plate in a smooth manner without rubbing against or getting caught on the frame of the door jamb.

patio door repairs near me should identify the type mortise lock you currently have before purchasing a replacement. This can be done by taking a look at the faceplate of the lock and determining whether it is round or square. Look at each screw hole in the existing lock and note their dimensions. This information will allow you to find the replacement lock that has exactly the same size and will fit into your existing hole.

You'll want to identify the mortise lock and examine it for any scratches, bends, or other damage that need to be fixed. A damaged or bent latch is more likely than one that's frequently used to break. Replace the lock if it displays indications of damage.

After you've determined the type of lock replacement that you require It's time to begin the actual repair. Remove the old handle and spindle out of your patio door, and then insert the new one. Start by putting in the handle inside by aligning it with the spindle and then fixing it with the two screws or bolts that secure it. Once the handle's interior is installed, you can install the handle that is outside and screw it in place, too. Once you've completed these steps, you can test the new handles to ensure they open and close easily and that the latch catches correctly with the strike plate.

Check the Strike on the door.

The door latch and strike plate are two components of the lock that work to ensure that the latch locks the door. If these are misaligned, the latch won't latch the door properly. Fortunately, this issue is usually simple to fix.

First, inspect the holes in the strike plate's receiving to ensure that they are free of obstructions like dirt or plastic plugs. Then loosen the screws that hold the strike plate in place and allow it to move horizontally, but not detaching it from the frame of the door. Then, adjust the strike plate to ensure that its holes for receiving are aligned with the latch hooks on the door latch. After the strike plate has been adjusted then tighten the screws and then test the door to determine whether it locks smoothly after the new adjustment.

Door strike plates can be a bit difficult to locate for homeowners with sliding patio doors, but they're essential to lock and unlock your door. The metal plates are typically placed on the top and bottom of the door jamb which is where they are used to support the door's latch. The door latch is inserted into the strike plate and forms the seal. If the strike plate is damaged, rusted, or not properly installed, it could prevent the latch from locking the door securely.

One common reason for a patio door lock to stick or not close is a misalignment of the latch and strike plate. This can be verified using the "lipstick" test. Apply some lipstick across the edge of the deadbolt, then cover it with masking tape. When you close the door the lipstick will leave an impression on the tape, showing exactly where the latch connects to the strike plate. If the mark is too low or high you can easily adjust the strike plate.

If your sliding patio door locks aren't functioning properly they can help keep your home safe from burglars. It is imperative to repair the issue as soon as you can. By following these easy steps, you can fix your patio door's lock and get it back to normal within a short time.

Here's my website: https://articlescad.com/the-top-5-reasons-people-thrive-in-the-sliding-patio-door-repair-industry-152303.html