Notes

A Look Into The Future How Will The Patio Door Lock Repair Industry Look Like In 10 Years?
Patio Door Lock Repairs

Over time, wear and tear can cause lock malfunctions. There are a few simple steps you can follow to ensure the security of your uPVC door.

These easy fixes will make your home safer regardless of whether you re-align the lock or clean the locking mechanism.

Clean the Lock

Although patio doors are a great way to bring the outside in and keep out the elements but they can also pose security risks in the event that your lock isn't operating as it should. With time, wear and tear, cold and hot weather dirt, and other debris can cause your patio door lock to become difficult to operate. Fortunately, with a little care you can make sure that your patio door's locks will always function effectively.

It is important to first clean the patio door lock as well as all moving parts. This helps flush out any accumulated grime and coatings that may hinder the lock from functioning as it should. Start by wiping the moving parts of the lock for your patio door with a damp cloth. Then, use patio doors repairs near me scouring cloth or a damp, rough cloth to scrub the dirt-infested areas of the door frame and frame. Then wipe the lock using a dry towel to get rid of any moisture. Let it air dry before using it.

If your patio door is equipped with pin-tumbler latches, you can lubricate it by applying powdered Graphite to the key. You can also use a Teflon lubricant like WD-40 Multi Use Product. This type of lubricant is able to be applied with ease and will not disintegrate over time. If you are unable to find the correct lubricant for your lock, you can use a pencil with larger tip. Put the pencil into the lock and jiggle it around a bit to distribute the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors free from dust, dirt and debris. They are particularly susceptible to snow and ice, which can cause them to be stuck or jammed which makes it difficult for your patio doors to open and close.

You can clean the track rails and rollers on sliding patio doors by removing any weather stripping that is dirty or damaged. Clean it, then replace it. The same is true for patio door rollers, which can be cleaned and sprayed with non-stick lubricant in order to allow them to move freely.

Lubricate the Moving Parts

uPVC French Doors, like sliding patios, are operated with 3 to 4 or sometimes, 5 points locking mechanisms. These include the handle and lock cylinder that is operated with keys. These doors also need maintenance, including lubrication of the moving parts. This can be done with an oil that is thin (never WD40) and is recommended to be done at least once per year.

If sagging hinges don't cause the problem, it could be that the door is not aligned. It could be rubbing against or catching the strike plate's opening in the frame. The solution is to remove the strike plate, and then use an abrasive chisel, which will enlarge the mortise it sits in. This lets the latch sit correctly in the hole, and also prevents getting caught or rubbing against the frame.

Take a measurement of the length of the cylinder using a piece of wood or a book that is able to fit into the space above the adjustment screw. The outer dimension is the distance from the outside of the door to the middle of the cylinder, while the inner measurement runs from the center of the adjustment screw until the end of the cylinder.

Check the lock's width

If your patio door latch is difficult to turn even after oiling and cleaning, it's possible that it's not aligned with the strike plate. Verify that the door is balanced, and that the hinge screws are in good condition. In a lot of cases, however, simply moving the strike plate upwards or downwards can fix the problem.

Most of the time, the issue occurs when the strike of the lock is too small for the latch to properly engage. In this case you'll have to increase the hole using either a hammer or chisel, and then test the latch to ensure that it connects to the strike plate without rubbing against or catching on the door's frame jamb.

Before you purchase a replacement lock, first determine what kind of mortise lock you have. You can do this by looking at the faceplate of the lock and determining whether it is round or square. Then, take a look at the screw holes in the existing lock and note the dimensions of each. This information will allow you to locate the replacement lock that has exactly the same width and will fit into the hole you have already.

In addition to identifying the current mortise lock you should also examine it for any scratches or bends that may require repairing. A badly bent or damaged latch is more likely than one that's been used a lot to break. Replace the lock if you notice evidence of damage.

After you've determined the type of lock replacement you require, it's now time to start the actual repair. The old spindle and handle must be removed from the doorway to the patio. Install the new handle. Start by putting in the handle inside by aligning it with the spindle, and then securing it in place with the two screws or bolts which hold it. Install the exterior handle following the interior handle. Once you have completed these steps, test the handles to make sure they open and shut easily and that the latch is in contact correctly with the strikeplate.

Check the Strike on the door.

The door latch and strike plate are the two components of the lock that work to ensure that the latch is secure the door. A misaligned strike plate or door latches will cause the latch to not latch the door correctly. This problem is usually very easy to fix.

Check the receiving holes of the strike plate to ensure they are clear of obstructions such as dirt or plastic plugs. Then, loosen the keeper screws that keep the strike plate in place and allow it to move vertically, but not detaching it from the door frame. Then adjust the strike plate so that its receiving holes align with the latch hooks on the door latch. After the strike plate has been adjusted tighten all screws and check whether the door closes smoothly.

These plates are difficult to reach for homeowners who have sliding patio doors. However they are crucial for locking and unlocking your door. These plates are usually placed on the top and bottom of the door jamb where they serve as the door's latch. The door latch is inserted into the strike plate, and it creates a seal. If the strike plate is damaged, rusted, or not installed correctly, it may stop the latch from locking the door securely.

A misalignment of the latch and strike plate is the most common reason for the patio lock to not close or remain in place. This can be checked with the "lipstick" test. Apply a little lipstick along the edge of the deadbolt. Then cover it with masking tape. The lipstick will leave a mark when you close the door. This will show you exactly where the latch meets the strike plate. If the mark is too high or low it is possible to alter the strike plate.

If your patio door locks for sliding are not working properly, they can keep your home safe from burglars. It is imperative to repair the issue as soon as possible. By following these simple steps, you'll be able to fix your patio door's lock and get it back to normal within a short time.


Website: http://lovethegiver.com/activity/p/593011/