Notes

20 Tools That Will Make You Better At Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism faulty? Perhaps the window or door handles don't meet up correctly or are difficult to use.

You will lose energy if your double-glazed doors don't perform as they should. This also increases the chance of burglary. Owen the Locksmith will be able to repair your door lock for reasonable costs.

Snapped Key

If a key breaks within the lock, it can be extremely frustrating. It could also be an issue for security, since the door may not lock and make you open to intrusion. There are a few quick fixes you can try to fix the problem and make your door work again.

Remember to remain calm. If you panic, you could end up pushing the broken key further into the lock.

Next, spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also employ a screwdriver in order to break up any stuck pieces that could be hindering the flow. If you have a chunk of the key that is still sticking out, grab it with a paperclip or another thin metal object and pull it. Both of these methods work, but be cautious not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor, and some jigsaw blades are also suitable for this purpose. If you don't have any of them available, you can use needle-nose pliers that bend to create a hook. Finally, you can use a pair of tweezers grab and remove the last bit of the broken keys.

If you are unable to get the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present within the lock.

If none of these solutions seem to work, it could be time to consult a locksmith. The experts at Fitlocks can quickly solve problems like broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are simpler to use. You can schedule repairs to your double-glazing online or contact us to discuss your needs.

Broken Cylinder


A damaged cylinder could pose a serious security risk. Luckily, it's an easy repair for an expert locksmith to complete. Locksmiths will need to tap the cylinder to fix it. They can do this with the hammer or any other tool, but the most efficient way is to make use of an extended match or piece of wire. The match or wire end near the keyway. After this, the locksmith can strike the lock and break it open. This is much better than using a heavy hammer that can cause damage to the lock.

The most common cause of cylinder head cracks is overheating. This can occur when the cylinder block as well as the cylinder head are made from different metals, including cast iron and aluminium. Different metals will heat up and cool down at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.

Corrosion is a different cause of cylinder fractures. If the cylinder head as well as cylinder block are not maintained properly, this could lead to rusting or corrosion and cause them to expand at a a higher rate than they should. This can cause cracks in the future.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be caused by a number of things. A defective locking mechanism, misalignment or a worn handle are common causes of this issue.

Fortunately it's a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith will typically be able to resolve this issue within a matter of hours of arriving at your property. Based on your requirements they can change the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to provide you with a recommendation of the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection from burglars. It's a small price to pay for the security that comes from knowing that your uPVC doors are safe.

click now 's not surprising that window handle locks may break. They have complex mechanisms which deteriorate over time. If yours is damaged it may be difficult to identify the cause of the issue. Make sure that you repair it correctly.

Fixing your broken handle, whether it's the internal latch or locking mechanism will increase the security of your uPVC door and stop draughts. It is costly to replace or repair your handle incorrectly and it can also harm the frame and lock of your door.

Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be on the inside of the backplate. It is typically covered by the cap of the screw for aesthetic purposes. It is important to not be able to replace any internal parts of the handle like the levers and plates on either side. Ideally, keep them in the same order so that you can replace them again in the event of a need.

Then, rotate the handle until it's 90 degrees to the window frame and loosen the screw at the back of the handle that fixes it to the internal spindle by using another screwdriver. Once the screw is loose, you can pull the handle out and take out the broken spindle. Replace it with a brand new spindle, ensuring that it's the same length (you can buy them on the internet or in hardware stores). Securely screw it in the frame. Be careful not to overtighten as this could damage the handle or the window frame.

Close the handle and try it. It is likely that it will operate smoothly and you'll be able to open your window again.

Be sure to double-check that your uPVC window is shut correctly when you're using the handle. If they don't cause draughts and damp in your home, as well as compromising your home's energy efficiency. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is usually the case that the spindle inside the handle breaks, rather than the handle itself. This is particularly frequent in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the frame of the window. The handle is connected to a rod in the centre that triggers a set of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism does not open after the handle is turned, it is likely the spindle has been damaged. This can be a frustrating problem.

There are ways to fix this problem. A professional locksmith can quickly and effectively address this issue. They can remove the window handle using a tool that removes the wheel component of the mechanism where the spindle goes. This can be done without damage to the handle or the window frame.

Once the wheel is removed, the technician will inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its component parts and carefully recording their general condition as in addition to any specific areas of wear or damage. This procedure is typically carried out by technicians in an environment that is clean.

The next step is to clean the damaged spindle. This will help remove any debris or dirt that might be preventing it from working normally. Following this the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle cannot be repaired it may need to be replaced entirely. Home centres sell generic replacements but if the style of your window is unique then it is necessary to speak with a woodworker or cabinet maker who can make the exact part for you. Once the spindle has been installed, it is attached to the handle. The screw holes on the handle with the existing screws in the frame. Once the handle is set, you are able to operate your uPVC windows.

Read More: https://kirkpatrick-sloan.mdwrite.net/double-glazing-windows-repair-11-things-youve-forgotten-to-do