Notes

Five People You Must Know In The Peugeot 208 Key Replacement Industry
Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working one day, it could be due to a dead coin battery or water damage, receiver module issues or a defective electronic chip. Luckily these are all easy to fix, and you'll have your vehicle back to normal in no time at all!

Car keys can also fail due to the blade getting worn. You can solve this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.

Battery

The key fob in your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob to stop functioning which prevents you from locking and opening the doors or even starting your engine. To fix this issue, you'll have to replace the battery inside your key fob.

You'll have to purchase batteries for replacement from an auto parts store or a local hardware store. When you purchase the battery, ensure that it's new and hasn't been on the shelf for a long time. A fresh new battery will have greater capacity and will also be able to transmit a stronger signal to the car.

After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors won't open it is most likely to be in the receiver module of the car that can be reset by your local Peugeot dealer.

It's possible that the chip inside your key fob is damaged. This could happen when you drop your key fob on the ground or expose it to water. The rubber seals that protect your chip from moisture could become worn out over time. This is particularly true when you expose your key fob to water for prolonged periods of time, for example, swimming it in the ocean. To avoid this, you should keep your key fob out of moist areas and away from water.

Water Damage

Don't give up on your key fob when it gets wet, no matter if you slipped into the pool or stumbled into a pool. The key fob is protected by rubber seals, but prolonged exposure to water may affect the electronic chip. Water is a good conductor and any water that comes into the key fob will cause a series short circuits which eventually damage the electronic chip. After removing the battery scrub the contacts with isopropyl ethanol and dry it off completely before putting it back in.

flip key could be the reason your Peugeot 308 won't start. If you have a spare car, jumper cables can be used to get the engine working again. If the battery is causing the problem, it will need to be replaced.

A poor receiver in the car could also block it from receiving the signal from the keyfob. It could be a issue with the antenna, or wiring or the key fob might be damaged. If you have a new key fob, it may need to be programmed into the vehicle. If you are unable to fix the problem, contact an expert technician. A technician who is trained in the field will be able diagnose the problem quickly, and resolve it quickly.

Radio Interference

The signs of a key fobs not being recognized or having a narrow range of operation usually mean there is an interference in the system. The interference can be radiated or transmitted, the latter caused by power and speaker cables that are too close to electrical parts. Generally speaking, rerouting cables or moving them further away from the components may solve the problem.

It's unlikely that someone is listening in on your key fob's signals to steal your car, but it is possible that the signal is being distorted by radio frequency interference. Fortunately, this is easy to fix.


If your key fob not being recognized, try a fresh battery. Also, make sure that the battery is of the proper size and type. Batteries of the wrong size could damage your battery.

These devices can interfere with the key signal, if they utilize the same radio frequency. Avoid attaching these devices to your key fob.

Pairing Issues

The remote keyless entry system of the car is equipped with a receiver that receives radio frequencies from the key fob. You will not be able start your vehicle if this receiver is malfunctioning, even if your key fob works and can be reprogrammed. This problem can be caused in a number of ways, including by an inoperative battery on the coin-cell or water damage. The receiver may also be malfunctioning because of a software bug or internal damage in the key.

One of the main reasons your Peugeot 308 key fob isn't working is because the battery inside has gone out of service. It is easy to replace it with a brand new battery however, it's important to choose the right battery for your key fob. Using an incorrect battery could lead to further problems with the key fob, therefore it is recommended to use the original or an equivalent replacement in size, voltage and specification.

Another reason that the reason why your Peugeot 308 key fob might not be working is that it is linked to another vehicle. This can happen if have given your key fob away to a friend or if the key has been used to unlock or start other vehicles. This can be resolved by reprogramming the key fob using an OBDII scanner. This tool will usually ask you to provide certain details regarding your vehicle, like the VIN or engine type, and it's crucial that you enter it correctly.

Website: https://www.thekeylab.co.uk/peugeot-car-keys/