Notes

10 Things You've Learned About Preschool, That'll Aid You In Peugeot 308 Key Fob
Peugeot 308 Key Fob Replacement

Peugeot's 308 may be slightly old but it's still striking. It's not the most luxurious vehicle in its class, but it's a relaxing and civilised drive.

We get asked frequently at Coded Car Keys to replace peugeot key fobs. These tips can assist whether the issue is ongoing or intermittent.

Water Damage

If you accidentally drop your key fob in a puddle or splash it with water when kayaking, swimming, canoeing, rafting or canyoning, it's probably to sustain water damage. Keep your key fob in a dry bag every time you are outside or perform things that expose it to excessive amounts water.

You'll also want to make sure that the fob is completely dry prior to opening it and reusing it. If you detect any odors from the fob (such as industrial liquid or windshield washer fluid), this is another indication that it's been submerged.

A circuit board that's wet can cause the battery to dump its energy or even explode. If you can get your keyfob 308 out of the water and turn it upside up and shake as much water as you can prior to opening the casing. After opening it, take off the battery and wipe down the circuit board using an alcohol-soaked cotton swab. 90-percent isopropyl alcohol.

Other reasons your Peugeot 308 remote keyless entry system could stop working include a dead battery for your coin or receiver module issue signal interference, an electronic chip malfunctioning. If none of these causes the cause, you can try resetting the system by disconnecting the battery with 12 volts for approximately 15 minutes.

Dead Coin Battery

Peugeot cars come with a remote-start system that allows the driver to start the car from a distance while warming up or cooling down the vehicle prior to stepping inside. This feature is very useful particularly during the cold winter months. However, it is possible that the remote start system ceases working due to a variety of causes, such as a dead coin battery.

The coin-shaped battery contained inside the key fob could last between two and four years based on the frequency with which it is used, the location it was purchased, and the way it is utilized. The date for use-by will be written on the packaging or mentioned in the user manual.

If the key fob is not functioning after exposure to clean tap water it is recommended to take the battery off, clean the electronic chip using a paper towel and isopropyl alcohol, and then dry it completely before replacing it. If you expose it to salty or soapy water, the chip could be damaged and you'll need to replace the key fob completely.

If peugeot 3008 key fob programming 're not sure whether the battery is in good condition You can test its voltage with an instrument connected to the terminals for plus and minus. The voltage should be between 12-13 volts, however, if it reads lower, the battery needs to be replaced. If you want to, you can attempt to reset the onboard computer by disconnecting the 12 volt battery for a short period of time, and then reconnecting it in reverse order (positive cable first followed by negative). The engine should now begin.

Faulty Receiver Module

If you're unable to see the "Key Detected" message on your dashboard, it's possible the receiver module has discovered a problem. It is the part which sends out an alert when your key fob activates. It also functions as an alarm and blocks the car from starting if you don't have the correct key.

This could be due to a variety of factors including water damage or simply ageing. If your Peugeot 308 key fob has been exposed to dirty tap water, for instance the chip that is located inside is damaged. In this scenario it is necessary to take it apart and clean it thoroughly with isopropyl or electronic cleaner. Once it's dry you can put the battery back in and try again.

If the issue continues to persist then it's a good idea to see an area Peugeot specialist or locksmith. They can utilize an instrument for diagnosing to pinpoint the problem and repair it.


It can be a stressful experience to lose your Peugeot car key. A qualified auto locksmith will be able to solve the issue in minutes. They can program your vehicle and cut a fresh, functioning key for you. Find the nearest locksmith.

Faulty electronic chip

The electronic chip inside your Peugeot 308 key fob is an important component of the remote control system. If it is damaged your car may not start or receive a message that reads "anti-theft active". In this situation, the only solution is to replace the key. Luckily, auto locksmiths who are professionals can complete the task within the shortest period of time.

The chip inside the chip of your Peugeot 308 key fob can become faulty due to sweat, water damage dirt, or any other cause. If your Peugeot key fob was exposed to dirty or soapy water, it must be cleaned as soon as possible. You can employ a paper towel as well as isopropyl ethanol to clean the electronic component. Then, you need to let the battery completely dry.

Radio interference can cause the key fob to stop working. This could be caused by other devices operating at the same frequency as your Peugeot key fob. It can also be caused by weather conditions or objects that are in the vicinity of the vehicle. If you have this issue, it is best to visit the Peugeot dealership.

The Peugeot key fob 207/308 is extremely delicate and requires care. It is important not to drop or throw the key fob. If you lose it, try to locate it as soon as you can. You can reset the on-board computer by disconnection of the battery for a couple of minutes. Unplug the negative cable prior to the positive.

Read More: https://www.thekeylab.co.uk/peugeot-car-keys/