Notes

Five Things Everyone Makes Up About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the door or window handles aren't aligned properly or are hard to use.


You will lose energy if your double-glazed doors don't perform as they should. This increases the likelihood of burglaries. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

It can be quite frustrating when a key is snapped into a lock. It could also be an issue for security, since the door may not be locked and leave you vulnerable to intruders. There are fortunately simple fixes you can attempt to fix the issue and get your door functioning properly again.

Keep calm. If you panic and start playing around with your keys, you might just end up pushing the damaged piece of the key further into the lock, which could make the situation even more difficult.

Spray WD-40 or another penetrating lubricant into the lock. This will assist the broken piece be removed more easily. You can also use a screwdriver to help break up any pieces stuck that could be blocking the way. If you're fortunate enough to have a bit of the key visible and you want to remove it, make use of a paperclip, or any other metal object that is thin to grab it and then pull it out. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have one of these tools you can bend a hook using needle-nosed pliers. Additionally, a pair of tweezers can be used to grip and pull out the last part of the broken key.

If you can't get the broken piece of the key out, you can try using a lock de-icer. It's available in many hardware stores and works by freezing any moisture present within the lock.

If none of these solutions seem to work, it may be time to consult a locksmith. Fitlocks experts can quickly fix problems such as broken handles or snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them easier to operate. You can schedule repairs to your double-glazing online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a serious security risk. A professional locksmith can easily repair the cylinder. To fix the cylinder locksmiths must tap it. They can do this with the hammer or any other tool, but the most efficient way is to make use of a long match or piece of wire. The match or wire's end in the keyway. After this, the locksmith can hit the lock to break it open. This is much safer than using a heavy hammer that can harm the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the block and cylinder head are made of different metals such as cast-iron and aluminium. When the different metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another reason that could cause cracks in cylinders is corrosion. If the head and block of a cylinder are not maintained properly, they can corrosion or rust and cause them to expand faster than anticipated. This can cause cracks in the future.

If your uPVC window or door lock is stiff or requires an enormous amount of pressure to turn, it could be due to several things. This issue could result from a defective locking mechanism or misalignment, and also a worn out handle.

Fortunately it's a simple and affordable fix for the majority of homeowners of double glazing. A professional locksmith will typically be able to resolve this issue within a matter of hours of arriving at your home. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective option for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that offer an additional layer of protection against burglars. It's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks could break. They are equipped with complex mechanisms that wear out over time. It isn't easy to determine the reason for the problem and repair it correctly.

Whether the problem is in the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you stop the draughts. If you do not repair or replace your handle can be very expensive and can damage the door's frame and lock, so it's worth taking the time to do it correctly.

With the window open, loosen the screw holding the handle with the screwdriver. The screw should be located on the inside of the backplate, usually concealed by the cap of the screw to enhance the appearance. It is not recommended to lose any internal parts of the handle, such as the levers and plates on either side. Ideally, keep these in the same order so that you can replace them again when needed.

Then, rotate the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle which holds it to the internal spindle by using another screwdriver. Once the screw is loose, pull the handle out and take the broken spindle out. Replace it with a brand new one, making sure that it is the same length as the old one (you can typically find these on the internet or in hardware stores) and then securely screw it into the right place. Do not tighten the screw too much as this could cause damage to the handle and window frame.

Close the handle and test it. It should function smoothly and you'll be able to open your window once again.

Don't forget to double-check that your uPVC window is shut properly while you're working with the handle. If they're not, you could experience damp and draughts in your home, as in addition to compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is usually the case that the spindle inside a handle breaks rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the window frame. The handle is connected to a centre rod that triggers a set of cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle is broken This can be a very frustrating issue.

There are ways to fix this problem. A professional locksmith can quickly and efficiently repair this issue. They will be able to disassemble the window handle by using a tool that removes the wheel portion of the mechanism, where the spindle goes. This can be done without damaging the handle or causing any other damage to the frame of the window.

After removing the wheel the technician will inspect the spindle and identify the cause of the break. This involves breaking the spindle into its constituent components and carefully observing their general condition as well as any specific areas of damage or excessive wear. Continuing is usually carried out by technicians in an environment that is clean.

The next step is to clean the damaged spindle, this helps eliminate any dirt or debris that might be hindering its normal functioning. After this, the spindle could be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is comparable in size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the spindle fits perfectly with the handle.

If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centers sell generic replacements but if the window design is unique, you will need to contact an expert in cabinet making or woodworking who can recreate the exact component. Once the new spindle has been installed it can be fitted to the handle by lining up the screw holes in the handle and the frame existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

My Website: https://www.repairmywindowsanddoors.co.uk/wandsworth-windowrepair/