Notes

10 Things You Learned In Kindergarden That Will Help You With Patio Door Lock Repair
Patio Door Lock Repairs

Over time, patio door wear and tear can cause lock malfunctions. There are a few basic steps you can take to ensure the security of your uPVC door.

These simple fixes will make your home safer regardless of whether you re-align the lock or clean the mechanism.

Clean the Lock

Patio doors are ideal to let the outdoors in while keeping out the elements. However they could pose risky for security if the lock doesn't work correctly. With time wear and tear, extreme cold and hot weather dirt and debris could take their toll on the lock on your patio door and make it difficult to open. With a little attention you can ensure that the lock on your patio door is always working correctly.

To begin with, it's essential to clean your patio door's lock and all its moving parts. This will help get rid of any grime and coatings that may hinder the lock from functioning as it should. Begin by wiping down all the moving parts on your patio door lock with a damp cloth. Then apply a scouring pad or a rough damp cloth to scrub the dirt-infested areas of the door frame and frame. Then clean the lock using a dry towel to get rid of any moisture. Let it air dry before using it.

If you have an outdoor door that has pin tumbler latch mechanisms, you can lubricate the lock by applying powdered graphite to the key or using a lubricant made of Teflon, like WD-40 Multi-Use. This type of lubricant is able to be applied with ease and does not dissolve over time. If you're unable find the correct lubricant for your lock, apply a pencil that has a thicker tip. Place the pencil into the lock, and shake it to distribute the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio doors clear of dust, dirt and debris. They are particularly susceptible to snow, ice, and other debris that could cause them to jam or bind. This can make it difficult for your patio door to open and close.

Clean the track rails and rollers of sliding patio doors by removing weather stripping that is dirty or damaged. Clean it, and then replace it. The same is true for rollers on patio doors, which can be wiped down and sprayed with a non-stick lubricant in order to allow them to move freely.

Lubricate the Moving Parts

uPVC french doors, which are similar to sliding patio doors, work using 3-4 or occasionally five-point locking mechanisms, which include the handle and lock cylinder controlled by keys. These doors require maintenance, oiling of the moving parts. This can be accomplished using an oil that is thin (never WD40) and should be done every year.

If hinges that are sagging aren't the cause, the door may be skewed and catch or striking the strike plate hole in the frame. The solution is to remove the strike plate and then use an abrasive chisel, which will enlarge the mortise it rests in. This will permit the latch to fit properly into the hole and also prevent it from rubbing against the frame.

While the cylinder is out of the way and out of the way, measure its width using an object or a piece of wood that fits into the adjustment screw gap above the lock. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw until the end cylinder.

Check the lock's length

If your patio door latch isn't able to turn, even after cleaning and lubricating, it's possible that it's out of alignment with the strike plate hole. Examine if the door is in balance and if the hinge screws are tight however, in many instances it is possible to move the strike plate upwards or downwards can correct the issue.

The latch may not engage properly if the strike of the lock is too small. In this instance, you can widen the hole with the hammer and chisel. Then, test the latch so that it doesn't touch the jamb frame of the door or fall the frame.

You must identify the kind of mortise lock that you are using before you purchase a replacement. This can be done by looking at the end faceplate and determining if it is round or square. Then, take a look at the screw holes on the existing lock and note the size of each one. This information will aid you in finding a replacement that is the same width and is a perfect fit for the hole that you already have.

patio door repair company 'll want to identify the mortise lock and examine it for any bends, scratches or other damage that requires to be fixed. A damaged or bent latch is more likely than one that has frequently used to break. Replace the lock if you notice signs of damage.

Once you've checked the lock and determined which kind of replacement you require then it's time to begin working on the actual repair. Take the old handle and spindle from the patio door, and then install the new one. Start by putting in the interior handle, aligning it with the spindle and then securing it by using the two screws or bolts which hold it. Install the exterior handle following the interior handle. Once you have completed these steps Test the handles to make sure they can be shut and open easily and that the latch is in contact properly with the strikeplate.


Check the Strike on the door.

The strike plate and the door latch are two parts that work together to secure the door. If they are not aligned properly and the latch isn't latching the door shut correctly. This issue is usually easy to repair.

First, examine the strike plate's holes for receiving to make sure they are clear of obstructions such as dirt or plastic plugs. Then loosen the screws that hold the strike plate in place and allow it to move vertically but not separating it from the frame of your door. Adjust the strike plate so that it aligns its holes for receiving with latch hooks of the door latch. After the strike plate is adjusted, tighten all screws and test whether the door shuts smoothly.

These plates are difficult to reach for homeowners with sliding patio doors. However, they are essential to lock and unlock your door. These metal plates are usually located at the top and bottom of the door jamb, where they serve as the door's latch. Then, the door latch is placed on the strike plate, creating a seal when closed. If the strike plate has been damaged, rusted, or is not installed correctly the latch might not be able to lock the door properly.

A misalignment between the strike plate and latch is one common cause for the patio lock not to close or stick. The easiest way to check for this is to perform the "lipstick test." Apply some lipstick on the outside of the deadbolt, and then attach masking tape over it. The lipstick will leave a mark when you close the door. This will reveal exactly where the latch meets the strike plate. If the mark is too high or low, you can alter the strike plate.

If your patio door locks for sliding are not working properly they can help keep your home safe from burglars. It is imperative to repair the issue as soon as possible. Follow these simple steps to fix your patio door lock and restore its function.

Homepage: http://extension.unimagdalena.edu.co/extension/Lists/Contactenos/DispForm.aspx?ID=1583820