Notes

5 Patio Door Track Repair Leçons From The Pros
How to Fix Sliding Patio Door Track Repair

Sliding patio doors are convenient and beautiful, but over time they can have issues that make them difficult to operate. These issues are usually caused by damaged or dirty tracks or rollers, which can be fixed using WD-40 and a thorough cleaning.

Use your vacuum cleaner to remove any large particles of dirt and debris. Then, scrub the track using a brush and cleaning product as you move the door forward and backwards often. Apply a silicone-based grease to reduce friction.

Repairing Dented Tracks

Patio doors are an attractive addition to any home, but when they stop sliding or do not open smoothly, it can be a stressful experience. The good news is that in a lot of instances, a few easy steps can help your sliding door to return to a smooth operation.

A major reason for a stuck or difficult to move door is the accumulation of dirt within the track channels. The best solution to fix this is to disconnect the door from the track and wash it thoroughly. To get to the deeper dirt, you can employ a toothbrush or similar tool to get rid of it. After the track has been cleaned, a silicone-based sealant can be applied to stop any future issues.

Check the rollers as well for damage or misalignment. The rollers are located at the bottom of the doors and help guide them along the track. If they are damaged or not aligned properly, the doors will be more difficult to move and may require replacement.

Examine the tracks visually to look for any bends or dent. Inward bends may squeeze and restrict a door, while outward bends could knock the rollers off or cause them to be unable to move. If you notice bent sections of the track, you can straighten them using the help of pliers, a hammer or a block of wood. However, extreme bends might require professional repairs.

If these simple fixes don't work then you may need to replace the entire track. In this instance, you can buy kits in most hardware stores that enable you to attach a new track to the old one. patio door upkeep are available in several lengths and can be cut to fit your specific doors.

It's an excellent idea to get it checked out to take note of if your track is bent, breaking or showing signs of wear. In most cases, the professionals will be able to identify the cause of the problem and suggest a solution that is both safe and effective.

Repairing Broken Tracks

In most instances the patio door that is stuck or difficult to move is the result of dirt or damage to the track. The accumulation of dirt and debris over time. If your tracks are bent or damaged they might require repair or replacement by a professional. Fortunately, there are ways you can identify the issue and fix it yourself.

First, examine the track to ensure it is not obstructed by anything other than rust or dust. If the track is blocked by something other than rust or dust cleaning it thoroughly with the use of a soft detergent can remove any obstructions and restore smooth motion.

Next, check the rollers for any catching or sticking. A broken or faulty roller could cause the door to stick and could result in further damage to the track, that may require professional repair or replacement. If the rollers are not damaged, you may be able to resolve the problem by lubricating them. A silicone-based lubricant can reduce friction between the rollers on the track and the door.

A roller that is not aligned properly can cause your sliding door to stick or be difficult to operate. To fix this issue, find the screws for adjusting the rollers and adjust them until they are aligned with the track.

Another reason that can cause a difficult-to-move or stuck patio door is worn weather stripping. You can easily replace it by loosening the weather stripping from the bottom of the fixed panel as well as from the jamb with the help of a screwdriver, and then removing the old strip off and sunking the new one.

If your track is badly bent, let an experienced patio contractor. They can fix the problem and ensure that the track is securely in place without further damage or bending. However, if the track is only slightly bent or kinked, you may attempt to straighten it using a pair of metal-bending pliers. If you are unable straighten the track yourself using a hammer made of rubber and a piece of wood. Continue to hit the bent section until it is straight.

Repairing damaged Rollers

If your sliding patio door is loud or difficult to roll, the culprit may be your rollers. As time passes, the rollers become stiff and dirty. This causes the door to rub on the track, causing noise. To fix this problem first, clean the bottom track and then grease the rollers so that they smooth them back. After the rollers have been cleaned then you can put the door back on its tracks. Attach any braces or clips used to keep the door in place after it was taken from its frame.

Sliding patio doors are generally heavy, so it's best to have a person assist you in lifting the door and then tilt it toward you to lift it off the bottom track. Set the sliding patio door on a solid flat surface, such as tables or sawhorses. Remove any grilles shades, drapes, or shades from the doors. Remove patio door repair that are holding the head stop molding (Photo 2). On some older doors made of aluminum, this step is not required, but it's a good thing to do if you've got one. Then, remove the screws for adjustment of the rollers on both sides of the door frame. This screw controls roller height. By turning it counterclockwise, you will raise the rollers and clockwise will lower them.

It is a good idea to have someone nearby to assist you in disengaging the rollers. You'll need tools such as the screwdriver that has Phillips heads and pry-bars or a rigid putty knife to accomplish this. Once the rollers are free from the dust cap, take them away from the wheel mechanism and scrub them. Then, clean the surfaces of the rollers with alcohol to remove any residue or dirt. After cleaning the rollers, lubricate with a silicone based lubricant to keep them moving smoothly.


Reinstall the door by placing the top part of the door into the track, and then bringing the bottom portion in. Reinstalling the rollers in the track frame at their highest point is important. This will allow the door to slide effortlessly into place without rubbing against the tracks.

Repairing Damaged Wheels

Most often, a patio door is dragging because the wheels wear out. Examine both sets of wheels and replace them if they are damaged. Also, clean the tracks to keep the grit from destroying the wheels. Straighten bent tracks with pliers, or by hitting a block of wooden against the bent portion using a Hammer. If the wheels are still worn, consider a track sill cover. Installation is simple and takes less than 1 hour.

Here's my website: https://www.dermandar.com/user/riskdonna88/