Notes

14 Cartoons About Patio Door Repairs That'll Brighten Your Day
Tilt and Slide Patio Door Repairs

A functional tilt and slide patio door provides light, fresh air and a smooth transition between indoors and outdoors. Modern aluminum doors provide strength and durability as well as thermal integrity, and a variety of glass options to suit a wide range of aesthetics.

Dirty tracks and rollers are the primary reason for sliding door issues. Regularly cleaning and lubricating the moving parts can keep your sliding door in good working order.

Track and Roller Replacement

Tracks and rollers are main elements of sliding doors. They are housed within the bottom of the door's aluminum panel and sit on a raised track that allows them to slide open and closed. Over time, dirt may cause the tracks to become blocked and cause the rollers to become damaged. Keep your patio door clean and lubricated to avoid problems like this.

If your track isn't severely bent, it's possible to fix the track and rollers, without removing the door. Get a helper and then tilt the panel towards you to lift it off the track at the bottom (Photo 3). This may require some effort as the panels can be heavy. After the panel has been removed and laid flat on sawhorses and inspect the rollers. If they're damaged replace them with a new assembly. You can adjust the height of the rollers by turning the adjustment screws, which are usually located in slots that are located along the edges of the panel.

If the rollers are in good shape they may need to be cleaned or lubricated. Use a screwdriver for removal of the rollers and clean each one with denatured alcohol. This will get rid of any dirt and grime that has accumulated that might be creating resistance. Then, carefully position each roller back into its slot and fully retract it by using the adjustment screw. Then, lubricate the wheels using a silicone spray. This type of lubricant won't retain dirt as petroleum-based products do and will help your door move smoothly.

After cleaning the rollers and reinstalling them, you can install the door and check it to ensure that the track is properly aligned with the rollers and the doors are smoothly sliding. If you have any additional issues, call an authorized dealer in your area for assistance. Keep your doors clean and lubricated to prolong their lifespan and reduce the need to repair. We recommend a silicone-based lubricant since it does not draw dirt as WD-40. It is recommended to lubricate your rollers and tracks at least once a month.

Insect Screen Replacement

The sliding patio doors are a great way to maximize floor space, create airflow and allow in beautiful panoramic views. They can also pose a problem if the mechanism is not working properly or has stopped completely. Luckily, most problems with sliding screen doors are easily fixed. Dirty rollers from debris in the track or a wrinkled screen are typical causes however, you can repair them by following these simple steps.

If your screen is sagging or wrinkled, you must first lay the frame down on an unfinished work surface. Then slip a 1x4 block under each end to create a slight bow in the middle. This will allow the screen to be pulled tight and straighten it.

Make sure you purchase an alternative screen that is a couple of inches larger than the frame's opening in both directions. This will allow you to have room to trim off any excess. Finally, use a spline roller tool to press the rubber spline's edge into the channel. Once you've done this, it's time to push the rest of the spline.

Adjusting the Panel

The tilt and slide mechanism lets you widen the patio doors to allow for more ventilation, while keeping your pets, children and other household members away. Despite the convenience of this system, they tend to require more force than they are expected to and over time, this causes increased friction, crooked tracks, or misalignments that could cause the door to fail. The early detection of problems and minor adjustments are often able to solve these issues, and reduce the cost of replacement hardware.

The first step in adjusting a tilt and slide patio door is to remove the door and set it on a flat surface. After removing the panels make use of a screwdriver to remove the plastic caps from the holes of each adjustment roller. Once the plastic caps are removed, make use of a long shafted screwdriver to pull the adjuster out of its channel. After removing the roller, clean it with denatured or rubbing alcohol. This will eliminate any dirt that causes the roller to resist and let it easily retract into its channel after the process.

When reinstalling a movable panel align it with the frame and then use the drill to drive the screws into the flange. The flange needs to be secured securely to the door's edge while ensuring the flaps are aligned correctly. When the movable panel is in position, apply a blob of silicone-based lubricant onto the top track arm connector block as well as the lead Bogie wheel and the slave Bogie wheel, and then replace the plastic hole caps.

Repeat the procedure on two additional movable panels to restore their slide functionality and install the plastic flanges. Finally, attach the jamb side strip onto its counterpart fixed panel using a glue made of plastic. Attach patio door repair near me after the glue has dried and check the smoothness of the process. If the issue is not resolved then adjust the lead Bogie by taking it off cleaning it, then replacing it with a silicone-based oil.

Charley Bar Installation


A patio door is an ideal way to let your pet into and out of your home, however it can also be a point of easy entry for burglars. You can take steps to improve the security of your patio door by putting in a pin lock or an charcoal bar. These devices offer a combination of security and convenience that is unmatched by any other product on the market.

The bar charley is a fantastic option for your sliding glass door, and it is easy to install at your home. The charley bars can be placed in the middle of the door to prevent the patio door being jimmied by objects or tools such as a hockeystick or the handle of a broom. The charley bar is composed of polycarbonate injection-molded and extruded RPVC telescoping tubes which makes it sturdy and durable.

To install the charley bars, first make sure that it's the right length for your door by measuring horizontally from the edge of the track for sliding doors to the sliding glass patio door. Mark the points using an eraser where the bar will be placed. Use an eighth-inch drill bit to make holes in the wall jamb and patio door frame, being cautious not to cut through the glass of the patio door. Then, tighten the screws that came with the charcoal bars.

The Charley bars are an excellent choice for sliding glass patio doors or sash windows. This simple security tool will keep your sliding patio doors tamper-proof and burglar-proof for years to be. It is made of injection-molded polycarbonate, and has been tested to withstand over 400 pounds of pressure by Intertek. In addition the charley bar can be locked by using the key included with it. It is easy to install, and it hangs out of the way when not in use. Most hardware stores sell the charley-bar. However, if you want to get one that is sure to work, you should consider purchasing a charley bar from an online retailer.

Website: https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-bournemouth/