Notes

11 Strategies To Completely Redesign Your Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism become faulty? Perhaps the window or door handles aren't able to connect correctly or are difficult to use.

It is crucial that your double glazed doors work smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock for a reasonable cost.

Snapped Key

When a key snaps off within the lock, it can be extremely frustrating. It also poses a security risk, as the door might not lock and leave you vulnerable to intruders. There are a couple of quick fixes you can try to fix the problem and get your door working again.

Be sure to remain calm. If you get scared and start doing a lot of fumbling around you could end up pushing the damaged piece of the key deeper into the lock, thereby making the situation worse.

Spray WD-40, or another penetrating lubricant, into the lock. This will allow the broken piece to be removed more easily. You can also employ a screwdriver in order to break pieces that might be hindering the flow. If you have a part of the key that is still sticking out then grab it using the help of a paperclip or any other thin metal object and pull it. Both of these methods work well, however, be very careful not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges that could serve to extract hooks and Jigsaw blades also work for this function. If you don't happen to have any of these, you can bend a hook with needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grab and pull out the remaining pieces of broken keys.

If you are unable remove the broken piece of key Use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present in the lock.

If none of these solutions seem to work, it could be time to consult a locksmith. double glazing repairs near me can quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also alter the double glazing door mechanisms to ensure that they are easier to operate. You can schedule a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose a serious security risk. It's a good thing that it's a simple repair for professional locksmiths to complete. To repair the cylinder, locksmiths must tap it. This can be done with a hammer or other tool. However, the most effective method is to use a wire or a long match. Then, place the end of the match or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is more secure than using a hammer that could harm the lock.


Overheating is the primary cause of cylinder heads cracking. This can happen when the block and the cylinder head are made of different metals, such as cast-iron or aluminum. When different metals heat up and cool down at different rates, it could cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.

Another reason that could cause cracks in the cylinder is corrosion. When the cylinder head and cylinder block are not maintained properly, this could cause corrosion or rust that could cause them to expand at a higher rate than they ought to. As time passes, this may cause cracks.

If your uPVC window lock or door is stiff or requires an enormous amount of pressure to turn, it can be the result of many things. A defective locking mechanism, misalignment, or a worn handle are common causes of this issue.

Fortunately it's a simple and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith will usually be able to resolve this problem within an hour of arriving at your property. Depending on your needs they can change the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective options for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which give you an extra layer of protection against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They have intricate mechanisms which deteriorate over time. It isn't always easy to pinpoint the cause of the broken window handle lock and repair it correctly.

The issue could be in the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and help you to stop drafts. When you aren't doing it right, replacing or repairing your handle can be very expensive and can damage the door's frame and lock It is therefore worth taking some time to make sure you do it correctly.

With the window open and the window open, loosen the screw that holds the handle by using the screwdriver. This should be located on the inside of the back plate, and is normally covered by a screw cover for aesthetic reasons. Be sure to not lose any internal parts within the handle, such as the plates or levers that are on either side of the spindle. Ideally, keep them in the same order so you can replace them when needed.

Then, using an additional screwdriver loosen the screw that connects the handle to the spindle at the back. Once the screw is removed, you should be capable of pulling the handle away and pull out the broken spindle. Replace this with a new one, making sure that it's the same length as the old one (you will typically find them on the internet or at hardware stores) and screw it securely in the correct position. Do not tighten the screw too much as this could harm the handle as well as the window frame.

Make sure the new handle is correctly installed after which you can close and test the handle. It is likely that it will operate smoothly and you'll be able open your window again.

Make sure to check that your uPVC window is closing properly when you're using the handle. If they're not then you may experience draughts and damp in your home as and also affecting the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure they close correctly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle which is a lock mechanism that is located in the window frame. The handle is connected to a rod in the centre that in turn activates cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism is not able to open after the handle is turned, it's likely the spindle has been damaged. This could be a frustrating issue.

There are ways to fix this issue. A reputable locksmith can swiftly and efficiently fix this problem. They can take apart the window handle using a tool that removes the wheel component of the mechanism, where the spindle goes. This can be done without damaging the handle or causing any other damage to the window frame.

After removing the wheel, the technician can examine the spindle to determine the cause of the break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This process is usually carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle. This will help remove any dirt or debris which may be obstructing it from operating normally. The spindle may be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. He will then make holes in the same way into both pieces. This will ensure that the new spindle is a precise fit with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centers sell generic replacements, but if the style of your window is unusual then it is necessary to speak with a woodworker or cabinet maker who can make the exact part for you. Once the new spindle is installed, it can be positioned to the handle by line up the screw holes on the handle with the frame's existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Homepage: https://www.indiegogo.com/individuals/37634185/