Notes

15 Secretly Funny People Working In Locks Repair
How to Tell If Your Locks Need Repair

Lubricating your door lock can help. If the lock is wiggles when you insert the key, it's time to call an expert for repair or replacement.

In certain situations, a newer more secure lock could be more cost-effective than attempting to repair an old one.

Damaged Cylinder

If your lock cylinder feels stiff or the key isn't turning easily, this is an indication that the cylinder has been damaged. A broken cylinder could leave your door open to burglars. It is recommended to repair it as soon as is possible. If you're unable to fix it yourself, you should call a locksmith.

Rust and corrosion are the most frequent causes of problems with cylinder locks. You can prevent it by regularly painting the lock surface with a protective coating. Also, ensure that the weather strip is in good working order. This could cause water to seep into the cylinder, which can weaken it over time.

Another frequent issue is when the cylinder gets not aligned with the keyhole on the door. This could be due to various factors, such as a loose bolt or a misaligned keyway for the handle. To correct this issue problem, you'll need remove the screws that secure the cylinder and then gently adjust it. Make sure not to tighten the screws too tightly as this could damage the components.


An effective way to keep your cylinder in good shape is to apply a lubricant made of graphite. It is available in hardware stores and can be applied directly on the cylinder. The lubricant assists the key to turn smoothly, and helps prevent future lock problems.

If the cylinder is severely damaged, you may need to replace it. It's a relatively easy job that can be completed at home. The first step is to take off the faceplate from the lock. After removing the faceplate, you can begin disassembling the lock cylinder. Once you have removed the cylinder, be sure to note any set screws that are holding it in place. These are important to identify for reassembly later on.

Also, make sure to use a screwdriver that has a fine tip for getting into tiny spaces inside the lock. Also, you'll need a few ziplock bags to keep the pieces you take out.

Handles or Knobs that Are Leap

With time and use door knobs or handles will become loose. If this happens, it can cause a lot of inconvenience to employees and customers. The good thing is that this issue is usually simple to fix and doesn't require a specialist locksmith service.

In general, doorknobs that are loose can be caused by the same problems that cause locks to jiggle and pull away from doors: wear and age loose screws; mismatched components. It's also possible the building or property has settled slightly and this can affect the degree to which a door knob is positioned on the lock.

Handles or knobs that are loose could be repaired easily However, it is essential to have the proper tools and to be careful not to over tighten the screw. This could cause damage to the doorknob or handle. It is recommended to have a second hand to hold, give leverage or help with the tightening and twisting process.

It is first important to locate the screw that is loose. It is usually located under the cover, which is decorative and protects the lockset mounting ring. You'll need to press the lever or button with an awl, or the tip of a small screwdriver with a flat blade to take off the cover and expose the ring that holds the lockset. The nuts can be tightened by turning it clockwise.

Some modern doorknobs are made using a different method of fastening. They utilize a device referred to as detent, and are fastened to the door with hidden screws. This type of fastener may be a bit more complicated however, it can be fixed with the same steps.

After the screw has been tightened, it is a good idea for you to apply a washer to the screw. This will stop the screw from becoming loose in the future. This is especially crucial for doorknobs made of wood that may get a scuffed screw hole from repeated use. Washers can be purchased at any hardware store, and they are an quick and easy solution to stop a daily inconvenience. Make sure you select one that is suitable to the screw you use in your doorknob.

Poorly cut key

Keys that are not cut properly are the most common reason for a key not turning inside your lock. car door lock actuator repair near me could be the result of a poor copy made by locksmiths or the original key wearing down over time. If you're looking to have keys copied or have your locks rekeyed, it's crucial to select a reliable local locksmith.

A locksmith should always examine the key to determine the correct cutting depth and make sure they are evenly spaced across the key. A good locksmith will also examine the lock to determine the cause of the issue and then come up with an answer for you, whether it's replacing the pins or adjusting the lock cylinder.

Bring the key that isn't able to turn to a locksmith, so they can check it on their duplicator. This will make sure that the key is cut correctly and that it fits your locks properly.

If a key doesn't fit fully into the lock it could be caused by dirt or debris that has built in the lock. Lubricating the lock with graphite spray or a lubricant based on silicone can aid in removing tumblers that are stuck or clogged.

A key that was not cut exactly when it was made is another frequent issue. This could happen if someone attempts to make a low-cost and quick replica of a key. It is crucial to be sure to work with a professional locksmith who has the equipment and knowledge required to create high-quality copies.

If you've got a damaged key in the lock you can use a pair needle-nosedpliers or tweezers to remove it. Be careful not to insert the edge of the pliers or tweezers too far, because this could cause more damage and it's much easier for an expert to remove the broken part without creating further damage to the lock mechanism. Bring the damaged key to the locksmith and have them create a new one using their duplicator.

Sagging Locks

A sagging lock could be a cause of your difficulty locking your door. This can cause the latch or bolt to jam in the door's frame, making it more difficult to close the door. It can also lead to drafts and create a bigger gap between the frame and the door, which can damage both in the course of time.

It is possible to fix locks that are sagging. Usually, you can fix them by tightening screws on hinges. If that doesn't help then you can try to lubricate the lock. You can use powdered graphite or a silicone-based lubricant. Choose a lubricant which won't cause damage to the lock over the course of time.

Another issue that can hinder the ability of the door to properly shut and open is a locked system that isn't aligned properly. This is usually caused by an installation that wasn't done properly or a change in weather condition which causes doors and frames to shift. If untreated, this problem can leave your home or business vulnerable to robbers.

To correct this issue first, you'll need to start by examining the door and frame to see if they're on the same level. If not then you'll need to adjust the hinges in the correct height and align.

The next step is to examine the mortise and strike plate. If the strike plate is slipping out and is not repositioning properly, you can fix it by using a hammer or chisel. After repositioning it, check it to make sure that it aligns with the latch.

If you're having trouble with your lock, it might be time to call a professional locksmith. A locksmith can repair any lock, whether it's a Yale lock or a mortice lock.

Remember that only certain kinds of lock damage can be repaired. You should never attempt to bend the damaged bolt back into place because this could weaken it and could potentially damage the cylinder itself. If you're experiencing issues that are serious you should call a professional. They'll be able to examine the damage, and tell you what options are available.

Read More: https://www.g28carkeys.co.uk/car-door-lock-repair-near-me/