Notes

14 Misconceptions Common To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows or doors aren't aligned properly or are difficult to use.

You'll be wasting energy in the event that your double-glazed doors fail to work properly. This increases the chance of burglary. Owen the Locksmith can repair your door lock at an affordable cost.

Snapped Key

It can be frustrating when a key is snapped inside a lock. It can also be a security issue because it could expose you to a burglar if the door is not locked. There are a couple of quick solutions you can use to fix the problem and make your door work again.

Keep calm. If you panic and begin poking around wildly you could end up pushing the damaged piece of the key even further into the lock, which could make the situation worse.

Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece to slide out more easily. Look At This can also use a screwdriver to break off any pieces stuck. If you have a part of the key still sticking out then grab it using the help of a paperclip or any other thin metal object and pull it. Both of these methods work, but be cautious not to push the broken piece of the key deeper into the keyway.


Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these handy, you can make use of needle-nose pliers to bend and create hooks. You can also make use of a pair of tweezers to grab and remove the last bit of the broken keys.

If you can't get the broken piece of key out, try using a lock de-icer. This is usually found in most hardware stores. It works by freezing any moisture or ice that may be inside the lock.

If none of these methods seem to be helping, it might be time to call in a locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. You can request repairs to your double-glazing online or contact us to discuss your needs.

Broken Cylinder

A broken cylinder can pose a major security risk. It's a good thing that it's a simple repair for professional locksmiths to complete. Locksmiths will need to tap the cylinder to repair it. They can do this with a hammer or other tools, but the most effective way is to use a long match or piece of wire. Then, place the match's end or wire near the keyway. The locksmith can strike the lock and break it open. This is more secure than using a hammer that could cause damage to the lock.

Overheating is the main reason behind cylinder heads cracking. This can happen when the block and the cylinder head are made of various metals such as cast-iron and aluminium. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand faster than the rest of the cylinder.

Another possible cause for cracks in the cylinder is corrosion. If the head and block of a cylinder are not maintained in a timely manner they may corrosion or rust, which can cause them to expand faster than expected. This could lead to cracks over time.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn it could be due to a variety reasons. A faulty locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.

This is a straightforward and cost-effective fix that a majority of double glazing owners can accomplish. A professional locksmith is able to solve the issue within one hour of arriving at the home. Depending on your needs they can change the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They can even suggest upgrades to high-security 3 Star TS007 euro cylinders that will provide an extra layer of security against burglars. It's a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.

Broken Handle

Window handle locks have complex mechanisms that deteriorate with age and use, so it's not a surprise that they can break. It isn't always easy to pinpoint the reason for a broken window handle lock and then fix it properly.

Whether the problem is in the internal locking mechanism or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you to stop the draughts. Incorrectly repairing or replacing the handle could be expensive and can harm the door's frame as well as lock, so it's worth taking some time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic reasons. Be sure to not damage any of the internal components inside the handle, like the plates or levers that are on either side of the spindle. Keep them in the same order to make it easier to replace them if needed.

Then, using another screwdriver, loosen the screw that connects the handle with the spindle at the back. Once the screw is loose, pull the handle out and take the broken spindle out. Replace it with a brand new one, making sure that it is the same length as the old one (you can usually find these online or in hardware stores) and then securely screw it in the right place. Do not tighten the screw too much because this could cause damage to the handle and window frame.

Check that the new handle is installed, then close and test the handle. It should work smoothly, and you will be able to open your window after a few times.

Don't forget to double-check that your uPVC window is closing properly when you're using the handle. If they aren't closing correctly, you could encounter damp or draughts inside your home. Also, you could be compromising the energy efficiency of your home. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is usually the case that the spindle within the handle is broken, not the handle itself. This is particularly common in uPVC tilt and turn windows. These windows require a handle that acts as an locking device within the frame of the window. The handle is attached to a central rod which triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle has broken and this could be a very frustrating issue.

Luckily there are options to fix this problem. A professional locksmith will be able to quickly and efficiently repair this problem. A good locksmith will be able disassemble the handle of the window by using a tool to remove the wheel portion that houses the spindle. This is done without damaging the handle or causing other damage to the window frame.

Once the wheel is removed the technician can then inspect the spindle and determine what caused it to break. This involves breaking the spindle into its individual components and carefully observing their general condition, as in addition to any specific areas of damage or excessive wear. This procedure is typically carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle. This will help get rid of any dirt or debris which may be obstructing it from operating normally. The spindle could be repaired or replaced. If it is replaced, the technician could use a dowel of a similar size to the original and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has an exact fit with the handle.

If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers sell generic replacements but if the design of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can make the exact model for you. After the spindle is installed, it is fixed to the handle. Place the screw holes on the handle with the screws already in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.

My Website: https://pastelink.net/4vzg76c0