Notes

What Is Locks Repair's History? History Of Locks Repair
How to Tell If Your Locks Need Repair

Lubricating your door lock with oil may aid. If the lock wiggles when you insert the key, it's time to call an expert for repair or replacement.

In some instances an upgraded, more secure lock may be more cost-effective than attempting to fix an old lock.

Cylinder Damage

If your lock cylinder feels stiff or the key isn't moving smoothly, it could indicate that the cylinder has been damaged. A broken cylinder could leave your door open to burglars. It is recommended to repair it as soon as is possible. You can try lubricating your lock to see if this helps however, if you are unable to repair it on your own, a locksmith should be called.

Cylinder lock problems are often caused by rust and corrosion over time. You can avoid this by applying a regular coating of paint to the surface of the lock. Check that the weather strip is also in good working order. This can cause water to enter the cylinder, which can weaken it over time.

Another issue that is common is when the cylinder gets out of alignment with the keyhole on the door. This can be caused by many factors, such as loose bolts or a misaligned keyway for the handle. To fix the issue, you'll need to remove the screws that hold the cylinder. Then, gently adjust the cylinder. Be careful not to tighten the screws too tightly as this could damage the components.

An effective way to keep your cylinder in good working order is to use a graphite-based lubricant. It is available at hardware stores and can be applied directly on the cylinder. The lubricant makes the key move smoothly, and will prevent any future lock issues.

If the cylinder is completely damaged, you may have to replace it. It is an easy task that can be done at home. The first step is removing the faceplate. Once that's done it's time to disassemble the lock the cylinder. After you've removed the cylinder, it's important to note any set screws that are holding it in place. These are important to identify to make it easier to reassemble the cylinder later on.

The last thing to do is make use of a screwdriver that has an extremely fine tip to access the smaller areas of the lock. You'll also want to have some ziplock bags in order to store the parts you take out.

Knobs or Handles that are loose

Over time and use door knobs or handles can become loose. This can be a major inconvenience for both employees and customers. This issue is usually easy to fix, and doesn't require the assistance of a locksmith.

In general, doorknobs that are loose are often the result of the same issues that cause locks to jiggle and pull away from doors: wear and age loose screws, the wrong combination of components. It's also possible the house or business has shifted slightly and this can affect the degree to which a door knob rests on the lock.

g28carkeys.co.uk and handles that are loose can be repairable However, it is essential to have the right tools and to be careful not to over tighten the screw. This could cause damage to the doorknob or handle. It's also beneficial to have a second hand available to help you twist and tighten the doorknob.

First, it is crucial to find the screw that is loose. It is usually located under a decorative cover that protects the ring that holds the lockset. To remove the decorative cover and expose the lockset mounting rings, you will need to press a button or lever using an awl. It is then possible to tighten the nut by turning it counterclockwise.

Some of the newer doorknobs use an alternative method of fixing. These doorknobs are attached to the doors using hidden screws and a device referred as a detent. This type of fastener may be slightly more complicated, but it can be easily fixed using the same methods previously.

After the screw has been tightened, it is an ideal idea to apply a washer to the screw. This will stop the screw from loosening in the future. This is particularly important for door knobs made of wood that can result in an eroded screw hole due to repeated use. Washers can be purchased at any hardware store and they are an quick and easy way to end a daily inconvenience. Be sure to select the right washer to the screw you use on your doorknob.

Poorly Cut Key

Poorly cut keys are the most frequent reason for a key not turning in your lock. This can be a result of a poor copy made by locksmiths or the original key being worn down over time. If you're looking to have keys copied or have your locks rekeyed, it's essential to choose a reputable local locksmith.


A locksmith will always check keys for the correct depth of cuts, and also ensure that the cuts are evenly distributed across the key. A professional locksmith will examine the lock and identify the issue. They will then provide a solution, such as replacing pins or adjusting the lock's cylinder.

It is recommended to bring the key that isn't able to turn when you visit a locksmith, so they can check it out in their duplicator. This will ensure that the key is cut correctly and that it fits your locks properly.

If a key doesn't fit completely into the lock, it could be due to dirt or debris that has accumulated in the lock. Lubricating the lock with graphite or silicone-based lubricant will help unblock tumblers which are stuck or clogged.

A key that was not cut precisely when it was made is another common issue. This could happen if someone attempts to make a low-cost and quick copy of a key. Only locksmiths with the right tools and experience can create high-quality duplicates.

If you have a broken key in the lock and you want to retrieve it, you can use a pair of needle-nosedpliers or tweezers to remove the broken key. It is not recommended to insert the pliers' tips or the tweezers into the lock too deeply. This could cause the problem to get worse. It is much easier for a locksmith to cut off the broken piece without damaging the lock mechanism. It is also a good idea to bring the key that broke when you visit the locksmith to make use of their duplicator to create an alternative for you.

Sagging Locks

If you're experiencing difficulty locking your door It could be due to a weak lock. This could cause the latch or bolt to become stuck in the door frame and this could make closing the door more difficult. This can lead to drafts and create a bigger gap between the door frame and the door. Both of them can be damaged in time.

It is possible to fix locks that are sliding. Most often, you can fix them by tightening the screws on hinges. If that doesn't help you, try to lubricate the lock. You can try using graphite powder or a silicon based fluid. Be sure to select a lubricant that won't harm the lock over time.

Another issue that can hinder the ability of a door to open and shut properly is a faulty locking system. This can be caused by the door not being set up correctly, or a climate change that causes the doors and frames to move. If left untreated, this problem can leave your home or business vulnerable to robbers.

To fix this first, you'll need to start by examining the door and frame to determine whether they're on the same level. If they're not then you'll need to adjust the hinges in the correct height and alignment.

Next, you'll need to examine the strike plate and mortise. You can adjust the strike plate if it's sliding with a hammer, or chisel. Once you have moved it back and checked it, make sure it is in alignment with the latch.

Contact a locksmith if are having problems with your lock. Locksmiths can fix any lock, regardless of whether it's a Yale lock or mortice lock.

Remember that only certain kinds of damage to locks can be repaired. Do not attempt to bend the damaged bolt back into its place because this could weaken the bolt and possibly damage the cylinder itself. It is recommended to contact a professional if you are having issues that are serious. They'll be able to evaluate the extent of damage and provide you with more information about what your options are.

Here's my website: https://www.g28carkeys.co.uk/car-door-lock-repair-near-me/