Notes

10 Undeniable Reasons People Hate Double Glazing Lock Repairs
Double Glazing Lock Repairs

A good quality lock on your doors and windows can stop burglars from gaining access to your home. They usually don't want to break glass or try to squeeze through open windows.

However, some double glazing owners have encountered problems with their door or window lock after it's been installed. Fortunately, these issues can be fixed without having to purchase new double glazing .

Broken or faulty locks

A locksmith can repair your uPVC window lock or door lock if it's broken or faulty. They can fix hinges, striker plates, and locks for your double glazing. They can also adjust the cylinder to fix any misalignment that could cause your handle to operate correctly.

If the key fits inside the lock but doesn't turn or is difficult to insert, then the mechanism may be seized up. The dirt or grease could be trapped in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. It is important to make use of a dry lubricant such as graphite or teflon, rather than oil, which can attract dirt and stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should work its way through the mechanism and the lock should be able to rotate with ease.

A malfunctioning lock could be caused by loose screws within the mechanism of the lock. They may loosen and fall out or even break off completely, preventing the lock to perform as it should. A screwdriver can be used to tighten the screws however, it is important not to over-tighten them as this can cause damage to the internal components.

A faulty lock can be dangerous for both you and your family, especially if you have small children. They can easily unlock the door without your knowledge, giving them access to your home. If you're concerned about this happening, a licensed locksmith can offer rapid and effective service to secure your double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or broken

A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great option for those who are worried about opportunistic burglars trying to gain entry into their home. Ask your installer about antilift blocks. They can be put in in addition to existing locks and can aid in keeping your windows closed.

Handle locks are usually damaged or fail. They are the first thing a criminal will use to force open your window. The good news is that this is one of the easiest parts to fix.

Modern uPVC and aluminium handles feature a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is offered as an option with new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.

It is essential to fix a handle as soon as possible after it has been damaged. Faulty handles may prevent the window from closing properly and allow drafts to enter. It could also be a weak point that burglars with a plethora of opportunities could exploit, therefore placing your home and belongings at risk of being taken.

To repair the damaged mechanism, you must first gain access to the window frame, then take off the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that is in line with the profile of the internal window frame mechanism.

After the mechanism has been replaced, the handle can be fixed using the original screws - but we would recommend replacing them with larger ones since this will provide a more secure fit. The final step is to apply a layer of clear sealant in order to protect the handle from further corrosion. Once you've completed this step your window will be functional again, and at a fraction of the cost of replacing it.

Hinges that are broken or faulty

If your windows do not close properly, you may be experiencing draughts, a weakening of your home's security barrier and a higher risk of damp or water damage. Windows hinges that break or fail are a common occurrence and can be easily repaired.

If you have a window made of uPVC that won't open or close, it's likely your hinges are broken or damaged and need to be replaced. While most window manufacturers require you to purchase a new window unit in order to resolve this simple issue We can replace the damaged hinges and save you money.


Window hinges may break after repeated use, or they might be damaged due to corrosion over time. If you find a damaged hinge, it's important to take precautions to avoid further damage by being careful not to make the window swing open or closed.

You can find the right parts for your hinge by identifying its type. Maco, Mila and Roto are all brands of window hinges. It is recommended to consult a professional in this case so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

The hinges that are not working properly can cause huge problem for your uPVC windows and doors. They can be an important source of noise and can also permit water to infiltrate your windows.

To resolve this issue, first check that the pin barrel on both sides of the hinge is aligned. If it isn't tapping the headpin, use a hammer in order to make a slight bend in the hinge barrel. This will help keep the pin in place. Then, ask a helper to hold the door as you remove the hinges and hinges from both the doorjamb as well as the door. Replace the hinges and attach screws with glue. After the glue is drying, put a secure hold on the hinges by using weights or clamps.

After you have repaired your hinges, you are able to reinstall the door. You can also attach the handle. Replace the screws using wood dowels that are the same length as the original screw to ensure they are in line.

Broken or faulty glass

uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping out the cold and retaining heat. This can be the case with broken or damaged glass as well as defective locks. This is a problem that could be extremely costly if left unattended. This can also detract from the aesthetics of your home and lead to a loss in insulation. It is important to repair any damage immediately.

If your glass is cracked, but not broken it is usually possible to repair it yourself using the right tools and techniques. First, make sure that the surrounding area surrounding the glass is clean to ensure that any shards do not injure anyone and aren't an accident-prone area. Remove all broken glass pieces and dispose of them in the proper way. Apply masking tape across the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane window it's best to pre-fit the pane of glass before gluing it back in place to ensure that you'll have enough room to complete the task.

Before applying the glue, wipe the entire surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing, which can vary from product to product. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold delicate materials, depending on the angle.

When the adhesive has completely cure, carefully install the glass inside the window frame, making sure that it is flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Avoid bending double glazing near me as you reinstall it in order to weaken the seal. This can lead to water infiltration or condensation.

Get in touch with a professional glazier, like O'Brien(r) for an appointment to replace your glass if the window has been completely broken. It's important to act quickly when you notice broken glass.

Homepage: https://bpcnitrkl.in/members/zonezone0/activity/694189/