Notes

A Step-By-Step Guide To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism not working properly? Perhaps the door or window handles aren't able to connect properly or are difficult to use.

It's important that your double-glazed doors operate smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key gets stuck into the lock. It could also be a security risk because it could leave you vulnerable to a burglar if the door does not lock. There are a few easy solutions you can use to resolve the issue and make your door work again.

The first step is to remain calm. If you panic, you could end up pushing the damaged key piece further into the lock.

Spray WD-40, or any other penetrating lubricant, into the lock. This will help the broken piece to be removed more easily. You can also employ a screwdriver in order to break up any stuck pieces that could be blocking the way. If you happen to have a bit of the key that is hanging out it, you can make use of a paperclip or other thin metal object to grab it and remove it. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these items, you can bend a hook with needle-nosed pliers. Also, a pair tweezers can be used to grip and remove the remaining bit of the broken key.

If you're unable to pull the broken piece of the key out, you can try using a lock de-icer. This is usually available at most hardware stores. It is used to freeze any moisture or ice that might be inside the lock.

If none of these solutions seem to work, it could be time to consult a locksmith. Fitlocks experts can quickly fix problems such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are simpler to operate. Book a double glazing repair through us online, or give us a call to discuss your requirements.

Broken Cylinder

A broken cylinder can be a serious security risk. A professional locksmith can easily fix the cylinder. Locksmiths will need to tap the cylinder in order to repair it. They can do this with the hammer or any other tools, but the most effective method is to use a long match or a piece of wire. Then, place the match's end or wire close to the keyway. The locksmith will then hit the lock to crack it. This is superior to using a hammer that could cause damage to the lock.

The most frequent cause of cylinder head cracks is overheating. This can happen when the cylinder block and cylinder head are made from different metals, like cast iron and aluminum. Different metals will be heated and cool at different rates. This can cause localized hotspots to expand faster than the rest of the cylinder.


Another reason that could cause cracks in cylinders is corrosion. If the cylinder block and head are not maintained in a timely manner, they can be corroded or rust, which can cause them to expand more than they would normally. This could lead to cracks over time.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, this could be due to a number of things. This problem can be caused by a faulty locking mechanism, or misalignment as well as a worn-out handle.

This is a simple and inexpensive fix that most homeowners with double glazing can perform. A professional locksmith is able to solve the issue within one hour of arriving at your home. They can fix the locking mechanisms, or change the window handles, and also change the gearboxes based on your particular requirements. A skilled locksmith will always be able to provide you with a recommendation on the most cost-effective solutions for your home. They can even recommend upgrades to high-security 3 Star TS007 euro cylinders that will add an extra layer of protection against burglars. It's a small price to get the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

Window handle locks have intricate mechanisms that deteriorate with age and use, so it's not a surprise they occasionally break. It isn't always easy to pinpoint the reason for the broken window handle lock and fix it correctly.

If the issue is with the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security as well as help you to stop the draughts. double glazing repairs is costly to repair or replace the handle in a way that isn't done correctly. It can also damage the frame and the lock of your door.

Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be on the inside of the back plate, and is normally covered by an attractive cover for the screw for aesthetic reasons. It is not recommended to lose any internal components of the handle such as the levers and plates on either side. Keep them in the same order so that it is easier to replace them if needed.

Then, rotate the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is free, you can take the handle off and remove the broken spindle. Replace it with a new one, making sure that it's the same size as the previous one (you will typically find them on the internet or in hardware stores) and then securely screw it into place. Do not overtighten the screw because this could harm the handle as well as the window frame.

Close the handle and try it. It should work smoothly and you'll be able to open your windows after a few times.

Be sure to double-check that your uPVC window is shut properly when you're using the handle. If they don't close correctly, you could encounter damp or draughts in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they shut properly.

Broken Spindle

It is quite common that the spindle within the handle is broken, not the handle itself. This is particularly frequent in uPVC tilt and turn windows. These windows require a handle to operate an electronic locking mechanism within the window frame. The handle is connected to a central rod that activates a series of mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle is broken and this could be a frustrating problem.

There are ways to fix this problem. A professional locksmith can quickly and effectively address this problem. A reputable locksmith can disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This is done without damaging the handle or causing any other damage to the window frame.

After the wheel has been removed the technician can then examine the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting every component, observing any damage or excessive wear. This process is typically carried out in a clean, well-lit room by skilled technicians.

The next step is to clean the damaged spindle. This will help remove any dirt or other debris that could be hindering it from functioning normally. After that the spindle can be repaired or replaced. If it's being replaced, the technician could use a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.

If the spindle is damaged and cannot be repaired, it might need to be replaced entirely. Home centers sell generic replacements. However, if the design of your window is unusual then it is necessary to find a woodworker or cabinet maker who can duplicate the exact model for you. Once the spindle has been installed, it can be connected to the handle. The screw holes on the handle with the existing screws in the frame. Once the handle is securely in place, you can use your uPVC windows.

Website: https://www.repairmywindowsanddoors.co.uk/enfield-windowrepair/