Notes

The Most Effective Advice You'll Ever Receive On Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall on the fabric rather than on the floor w here they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. Windows that leak water do can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking might need to be removed before a new layer can be put on. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.


If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it blows open with a breeze. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It is an easy procedure, but it is easier with someone else to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to offer assistance.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, could become misaligned. This can cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your Upvc window, it's best to consult a professional immediately.

Read More: https://www.repairmywindowsanddoors.co.uk/aldershot-windowrepair/