Notes

15 Things Your Boss Wants You To Know About Repairs To Upvc Windows You Knew About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass


If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a number of problems, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen. Most often this is due to screws that have come loose over time. However, description here could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may require removal before a new layer of caulk can be put on. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. First, the hinges due to wear and tear may become displaced, which can cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them realigned or replaced. The interlock may also become unbalanced. This happens on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some type of filler. They can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as possible.

Website: https://www.repairmywindowsanddoors.co.uk/basingstoke-windowrepair/