Notes

20 Irrefutable Myths About Window Repair: Busted
Window Repairs

Window repairs can save homeowners money and keep their homes warm. Window replacement may be necessary in the event of serious damage, such as broken glass or a broken window frame.

Many other problems are fixable to extend the life of windows. The most frequent issues are:

Cracked or Broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged windows are not just ugly, but it can also result in more expensive electricity bills because the broken pieces let cold air into your home. Luckily, it's usually relatively easy to fix windows with broken panes.

Start by carefully removing the glass using gloves and safety glasses. You may need use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to clean the surface of the glass and wood of the frame.

After cleaning the area, apply silicone caulking that is water-proof to the frame's perimeter. This will prevent water from entering the frame through the cracks and cause further damage.

A serious crack in double-paned glass could cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is severe enough to compromise the integrity of the glass, or the glass has an inner pane completely missing, it might be the time to call an expert.

Thermal stress cracks may also occur when there's a drastic difference in temperature between your home and the outside. The glass is then able to expand and shrink. If this happens to two windows, it's probably best to simply replace the pane instead of trying to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready for replacement. It will also keep out cold and bugs. You can cut an amount of nylon stocking big enough to completely cover the crack and then glue it to the surface with duct tape. This isn't an end-to-end fix, but it will keep insects and cold air away from your home. If you notice cracks or blemishes on your windows that are older, you should check with the local company to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can alter the appearance of a home and also pose danger to your safety. It is possible to fix damaged wood. The first step is to make sure that the cause of the rot has been addressed. This can be accomplished by examining for leaks in the roof or gutters that are not functioning, cracked caulking and any other areas that allow water to enter the wood.

You will then need to remove the rotten parts of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After the areas that are rotten have been removed then you must replace them with fresh wood. Pre-treated wood is recommended for this project, as it will resist rot. If upvc window repairs are not able to replace the wood damaged by rot, you can try using wood hardener or filler to help strengthen the damaged area. Many hardware stores will have this type of product. To achieve the best results, make sure you follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. This can be done by applying a waterproof wood sealant. A product like Sikkens is a great choice to accomplish this task.

You can also use an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. It is essential to follow the instructions on the label. When the epoxy filler is dry, you can sand down the surface of the wooden. It is best to begin with a rough layer of sandpaper, and then progress to a smoother one.

You don't want to expose the damaged area to more moisture. So, it's recommended to cover the repaired area with an oil-based primer which will help protect it from moisture. After that, you are able to reapply the wood sealant, which is waterproof.

It won't open

A window that won't open can be caused by various factors. The house might have shifted, or the wood frames might have warped due to rainy weather. Someone might have also nailed them shut for security. With a little patience and the right tools, you can open the majority of stuck windows.

One of the most common causes of a window that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges and locks. Metal hardware can also rust if it comes into contact with humidity and direct sunlight. Spraying grease on these areas can help prevent oxidation, and help keep your windows operating correctly.


Stuck windows could be caused by an unintentional break or loosening of the pulleys that are used to lift and lower the window. These components can lose tension and become obstructed when they are situated two or more floors above ground.

If you're having difficulty opening the window try using a pry bar to gently push the window to open just a little at one time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the reason for windows that don't lift or lower. You'll need to refer to your owner's guide for more details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and lubricating them but they're still unable to open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless since a window that isn't properly shut could expose your home to water damage and burglary. Contact us for more information on our replacement windows and services today!

Here's my website: http://b3.zcubes.com/v.aspx?mid=13152536