Notes

5 Myths About Repairs To Upvc Windows That You Should Stay Clear Of
Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is large, you may think about the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues that include sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows to access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Based on the severity of the issue the caulking used previously may require removal before a fresh layer can be put on. When it is time to uPVC repair, you must avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. why not look here is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens in an ease. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should open.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give assistance.


It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges due to wear and tear may become displaced, which will cause gaps to develop between the sash and the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window, can be misaligned. Again, it may be possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.

Website: https://www.tumblr.com/forresthouse88/735256497267802112/15-lessons-your-boss-would-like-you-to-know-you