Notes

The Complete Guide To Double Glazing Lock Repairs
Double Glazing Lock Repairs

The best locks for your windows and doors will help prevent burglars from entering your home. They generally don't like breaking glass or trying to wiggle through windows that are not closed.

Certain double glazing owners however, have encountered issues with their door or window lock following the installation. These issues can be fixed without the need for a new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window or door lock if it's damaged or broken. They can fix hinges, striker plate and locks for double glazing. They can also move the cylinder around to fix any misalignment issues that could be causing your handle to not operate correctly.

If the key fits in the lock but it won't turn or is difficult to insert then the mechanism may be locked up. Grease or dirt can be trapped in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. Use a dry lubricant such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should make its way through the mechanism, and the lock should be able to turn with ease.

A faulty lock can also be caused by loose screws in the lock mechanism. They may loosen and fall out, or even break completely, preventing the lock from being able to perform as it should. The screws can be tightened with a screwdriver, but you must be cautious not to tighten them too much. This could cause damage to the internal components.

double glazing repairs near me damaged lock can be dangerous for your family and you. This is particularly the case if you have children. It can be easy for them to open the door without you knowing, and this can allow them access to your home. If you're worried about this happening, then a licensed locksmith can offer a quick and efficient service to re-secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all kinds of damaged and damaged mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are broken or are damaged

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is a great option for those who are concerned about potential burglars trying to gain access to their home. It is also a good idea to ask your locksmith about anti-lift blocks that can be installed on top of the locks already in place and help keep your window firmly locked in a closed position.

It's not uncommon for handle locks to become damaged or even fail - they are the first part of your window that will be pushed open by a criminal intent on breaking in. The good news is that this is among the most straightforward parts to repair.

Modern uPVC handles and aluminum handles are equipped with the multi-point locking mechanism referred to as Espagnolette that is designed to prevent forced entry. This security upgrade is often offered as an optional extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional extra on new double glazed window installations.

It is important to repair the handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and permit drafts to get in. It may be a weakness that burglars who are opportunistic could exploit, therefore putting your family and belongings at risk of theft.

To fix the malfunctioning mechanism, you must first access the window frame and then remove the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be found that is in line with the profile of the internal window frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. However, we suggest replacing them with longer screws as they will provide the most secure fit. The final step is to apply a layer of clear sealant to protect the handle from further corrosion. Once that's done, your window will be operational again and at less than the cost of replacing the entire window.

Hinges that are broken or Faulty

If your windows aren't shut correctly, draughts may get in, your home's security measures will be compromised and there's an increased chance of water damage or damp. Broken or damaged window hinges are a typical issue that can be fixed easily.

If your uPVC windows won't open or close it's likely that the hinges need to be replaced or repaired. While many window companies require you to purchase a whole new window unit to fix this simple problem We can replace the faulty hinges and save you money.

Window hinges are often damaged by repeated use, or weakening over time due to corrosion. If you've broken a window hinge, it's essential to take steps to avoid further damage. This includes not causing the window to open or close.

You can find the correct parts for your hinge by identifying its type. Common types of window hinges are Maco, Mila, Roto and other brands. It's best to consult a professional in this case so that you don't make the mistake of buying parts that are not compatible with your existing hardware and could cause further damage.

A damaged hinge can be a major issue for your uPVC windows and doors. They can be a significant source of noise and can also allow water infiltration which can damage your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If it isn't then tap the head pin with the hammer to create an arc in the hinge barrel. This will help keep the pin in place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges with ones that are of the same size, and then attach the screws using glue. After the glue is drying, put a secure hold on the hinges by using weights or clamps.

Once your hinges are repaired and repaired, you should be able to put back the door and then reattach the handle. Replace the screws with wood dowels of the same length as the original screw to ensure they are in line.

Broken or Faulty Glass


uPVC Windows can be damaged over time, even though they are extremely effective in keeping cold out and keeping the heat. This could include broken or damaged glass, as well as faulty locks. This is a problem that can be very expensive should it be neglected. This can also detract from your home's aesthetics and cause a loss of insulation. It is important to repair any damage immediately.

You can fix your cracked glass yourself if you have the appropriate tools and techniques. Be sure that the area surrounding the broken glass is clear of debris so that any shards do not cause injury or cause a trip hazard. Then, take any broken pieces and dispose of them in a safe manner. Apply masking tape to the entire area. This will stop shards of glass from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window it's a good idea pre-fit the pane of glass before gluing it back in place so that you know you'll have enough space to complete the project.

Use a dry, clean cloth to clean the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing times, which can vary from one product to the next. You may need to clamp the broken glass with lightweight clamps designed to support fragile materials, based on the angle.

When the adhesive has completely cured, carefully reinstall the glass inside the window frame, ensuring that it is flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being installed, as this could weaken the seal and cause condensation and water infiltration.

Contact a professional glazier such as O'Brien(r), to arrange an appointment to replace your glass if the window is completely broken. It's essential to act swiftly in the event of broken glass.

Here's my website: https://www.repairmywindowsanddoors.co.uk/bletchley-windowrepair/