Notes

Five Things Everybody Gets Wrong About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up correctly or are difficult to use.

You'll lose energy if your double-glazed doors don't function properly. This increases the risk of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

If a key breaks in a lock, it could be extremely difficult. It's also potentially a security risk, as the door may not be locked and could leave you vulnerable to intruders. Fortunately, there are quick fixes you can use to solve the problem and get your door functioning properly once more.

Be calm. If you panic you could end up pushing the damaged key piece further into the lock.

Spray WD-40 or another penetrating oil, into the lock. This will allow the broken piece come out more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be hindering the flow. If you're lucky enough to have a little bit of the key that is visible it, you can make use of a paperclip, or any other metal object with a thin surface to grab it and then pull it out. Both methods work, but be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have one of these tools you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grip and pull out the remaining piece of the key that was broken.

If you're unable to pull the broken piece of the key out, you can try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these solutions work, it could be time to consult a locksmith. Fitlocks experts can quickly solve problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also modify your double glazing door mechanisms to allow them to operate more easily. Get a double glazing repair with us online or give us a phone call to discuss your needs.

Broken Cylinder

A broken cylinder is an immediate security risk. A professional locksmith can easily fix the cylinder. To fix the cylinder locksmiths must tap it. This can be done with the hammer or other tool. The best method is to make use of a wire or a long match. Then, put the match's end or wire in the keyway. The locksmith can then strike the lock in order to crack it. This is better than using a hammer that could damage the lock.

Overheating is the primary reason behind cylinder heads cracking. This can happen when the cylinder head and block are made of various metals such as cast-iron and aluminium. When the different metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion can be a reason for fractures in cylinders. If the head and block of a cylinder are not maintained in a timely manner they could corrosion or rust and cause them to expand faster than they would normally. As time passes, this may cause cracks.

If your uPVC door or window lock is brittle or requires lots of pressure to turn, this can be caused by a number of things. This issue could be caused by a malfunctioning locking mechanism or misalignment, and also a worn out handle.

This is a simple and affordable fix that the majority of double glazing owners can accomplish. A professional locksmith will usually be able to resolve the issue within an hour after arriving at your residence. They can fix the locking mechanisms, or replace the window handles, and also change the gearboxes based on your specific needs. A professional locksmith will be able to inform you of the most cost-effective option for your home. They can even suggest upgrades to high-security 3 Star euro cylinders TS007 that add an extra layer of security against burglars. It's a small price to pay for the security that comes from knowing your uPVC doors are safe.

Broken Handle

It's not surprising that window handle locks can break. They are equipped with complex mechanisms which deteriorate over time. If yours fails it's difficult to determine the source of the problem and make sure you fix it correctly.

Fixing your broken handle, whether it's an internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing the handle could be expensive and could damage the door's frame and lock It is therefore worth taking some time to do it correctly.

Screwdriver Open the window and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, usually covered by the cap of the screw to enhance the appearance. It is not recommended to lose any internal parts of the handle such as the plates and levers on either side. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, with a second screwdriver, loosen the screw that connects the handle to the spindle on the back. Once this is released, you'll be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, making sure it's the same length as the old one (you can typically find these online or in hardware stores) and securely screw it into place. Don't over tighten the screw as this could harm the handle as well as the window frame.

Close the handle and try it. It should operate smoothly and you'll be able to open your window once more.

While you're working on the handle, be sure to make sure your uPVC windows are shut correctly. If they're not closing properly, you could experience draughts and damp in your home as and also affecting your home's energy efficiency. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These types of windows require a handle which acts as a locking mechanism within the window frame. The handle is connected to a central rod which triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open after the handle is turned, it is most likely the spindle is damaged. This can be a problem that is frustrating.

There are solutions to this problem. A good locksmith can quickly and effectively address this issue. double glazing repairs near me will be able to disassemble the window handle by using a tool that removes the wheel portion of the mechanism where the spindle goes. This is done without damage to the handle or window frame.

After the wheel has been removed the technician can then inspect the spindle and determine what has caused it to break. This involves breaking down the spindle into its constituent parts and carefully recording their general condition as well as any particular areas of wear or damage. The process is done in a clean environment by highly skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that could be hindering its normal function. After that the spindle is cleaned, it could be repaired or replaced. If it's being replaced, the technician can take the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.


If the spindle is damaged and cannot be repaired, it might require replacement. Home centers sell generic replacements. However, If the style of your window is unique then it is necessary to speak with a woodworker or cabinet maker who can duplicate the exact component for you. Once the new spindle is installed, it can be fitted to the handle by lining up the holes for screws in the handle and the frame existing screws. Once the handle is seated, you can operate your uPVC windows.

My Website: https://www.webwiki.ch/www.repairmywindowsanddoors.co.uk/beaconsfield-windowrepair/