Notes

The Complete Guide To Double Glazing Lock Repairs
Double Glazing Lock Repairs

Having quality locks on your windows and doors will stop burglars from gaining access to your home. Generally, they don't like breaking glass or trying to wiggle through windows that are open.

Some double glazing owners, however, have encountered issues with their window or door lock after installing. Luckily, these problems can be fixed without having to buy new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window or door lock if it's broken or faulty. They can repair the hinges, striker plates and locks on your double-glazed. They can also reposition the cylinder to correct any misalignment issues that could be causing your handle to not operate properly.

If the key fits into the lock but it won't turn or is difficult to insert, then the mechanism may be seized up. This could be due to dirt or grime accumulating inside the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate it. It is crucial to make use of a dry lubricant like graphite or teflon, rather than oil, which can attract dirt and stick to the interior of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should work through the mechanism, and the lock should be able to turn easily.

A damaged lock can be caused by loose screws within the lock mechanism. They can loosen, fall out, or even break off completely preventing the lock to work properly. These screws can be tightened by using a screwdriver, but be careful not to overtighten them. This could damage the internal components.

A faulty lock is dangerous for you and your family. This is especially relevant if you have young children. They can easily unlock the door without your knowledge and gain access to your house. If you're concerned about this happening, a vetted locksmith can provide a quick and efficient service to secure your double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always necessary.

Handles that are broken or faulty

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is a great option for those worried about potential thieves who may try to gain entry to your home. Ask your locksmith for antilift locks. They can be installed alongside your existing locks and aid in keeping your windows shut.

Handle locks are usually damaged or fail. They are the first component that a criminal will use to force open your window. Fortunately, the good news is that this is one of the easiest parts to repair.

Modern handles made of aluminium and uPVC feature a multi-point locking system called Espagnolette that is designed to resist forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installations. As an alternative upgrade, older style uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.

It is crucial to fix the handle as soon as possible after it has been damaged. A damaged handle can stop the window from closing correctly and allow drafts in. It may be a weakness that burglars with a plethora of opportunities might exploit, putting your family and belongings at risk of being stolen.

To fix the malfunctioning mechanism, you must first access the window frame, then take off the damaged handle. The gearbox that opens the handle is then located and the model is identified, so that a replacement may be sourced which matches the profile of internal window frame mechanism.

After the mechanism is replaced the handle can be put back together using the original screws. double glazing near me recommend replacing them with larger screws since they provide the most secure fit. The final step is to apply a coat of clear sealant to shield the handle from further rust. After this step is completed the window should be functional again, and at a fraction of the cost of replacing it.

double glazing repairs or damaged hinges

If your windows don't close properly, you may be experiencing draughts, the weakening of your home's security, and an increased risk of water or damp damage. Broken or damaged window hinges are a common issue and can be repaired easily.

If your uPVC windows won't open or shut it's likely that the hinges require to be replaced or repaired. Most window companies will require that you purchase a new window unit to resolve this issue, but we can replace the hinges and save you money.

Window hinges can be damaged by repeated use, or weakened over time by corrosion. If you find a damaged hinge, it's crucial to take steps to prevent further damage by taking care not to push the window to open or close.

The type of hinge you are looking for will help you find the correct parts to fix it. Maco, Mila and Roto are all window hinges. It's best to consult a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your current hardware and cause further damage.

Faulty hinges are a major problem for uPVC windows and doors. They can be a significant source of noise, and they can also allow for water infiltration which can damage your windows.


To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If it isn't then tap the headpin using the hammer to create an incline in the hinge barrel. This will help keep the pin in its place. Ask a friend to hold the doors while you take out hinge screws and hinges. Replace the hinges and install screws with glue. When the glue is drying, put a secure hold on the hinges by using weights or clamps.

Once you have repaired your hinges, you are able to install the door again. You could also reattach the handle. It is a good idea to replace the screws with the same length of wood dowels as the screw that was originally used so that they match up with each other.

Broken or Faulty Glass

uPVC Windows can become damaged over time, despite the fact that they are excellent at keeping out the cold and keeping warmth. This can be the case with broken or damaged glass and faulty locks. This is an issue that can be costly should it be neglected. It can also affect the appearance of your home and can lead to loss of insulation, so it is essential to fix any damage as soon as possible.

If your glass is cracked but not shattered it is usually possible to repair it yourself using the appropriate tools and methods. First, ensure that the surrounding area around the glass is free of debris so that any shards won't cause injury to anyone or are an accident-prone area. Then, you must remove any pieces of broken glass and dispose of them appropriately. Apply masking tape to the entire area. This will prevent glass fragments from sticking to your skin and splintering when you move them. Pre-fitting the glass pane before applying glue is an ideal option in the case of a window that has two panes. This will ensure that you have enough space to finish your project.

Before applying the glue, wipe the surface of the damaged frame and glass with a a dry, clean cloth. Follow the application and curing instructions that may differ from product to product. You may need to clamp the cracked glass with lightweight clamps designed to hold delicate materials, depending on the angle.

After the adhesive has cure, carefully insert the glass in the window frame. Make sure it is aligned with the frame's edge and that there aren't gaps between the glass sash as well as the frame. Avoid bending the glass as you put it back in place because this could weaken the seal. This can lead to water infiltration or condensation.

Contact a professional glazier like O'Brien(r) for an exchange if your glass window is completely broken. Leaving broken glass unattended can be a risk to pet and children, so it's essential to act fast.

Website: https://clashofcryptos.trade/wiki/Whats_Holding_Back_In_The_Local_Double_Glazing_Repair_Industry