Notes

Why We Why We Double Glazing Door Lock Repairs (And You Should Also!)
Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism faulty? Perhaps the door or window handles don't meet up properly or are difficult to use.

It is crucial that the double glazed doors work smoothly, otherwise you will lose energy and increase the chance of burglary. Owen the Locksmith will be able to repair your door lock at an affordable price.

Snapped Key

If a key breaks inside a lock, it can be extremely difficult. It's also potentially a security risk since the door may not be locked and make you vulnerable to intruders. Fortunately, there are quick fixes that you can try to resolve the problem and get your door operating correctly.

The first step is to remain calm. If you panic, you could end up pushing the broken key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to break off any pieces stuck. If you have a piece of the key that's stuck out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have one of these tools, you can bend a hook with needle-nosed pliers. Also, a pair tweezers can be used to grasp and pull out the last part of the broken key.

If you cannot remove the broken key piece Use a lock deicer. It is found in most hardware stores, and it works by freezing any moisture or ice that may be in the lock.

If none of these solutions seem to work, it might be time to contact a locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also modify your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair via our website or give us a call to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an immediate security risk. Luckily, it's an easy repair for a professional locksmith to complete. To repair the cylinder, locksmiths must tap it. They can do this with a hammer or other tools, but the most effective method is to make use of a long match or piece of wire. Position the match or the wire end near the keyway. The locksmith can then hit the lock to break it. This is superior to using a hammer that could damage the lock.

Overheating is the primary reason for cylinder heads to crack. This can happen when the cylinder head and block are made from different metals like cast-iron and aluminium. Different metals will heat up and cool off at different rates. This could cause localized hotspots to expand faster than the rest.

Another reason that could cause cracks in cylinders is corrosion. When the cylinder head and the cylinder block aren't maintained properly, this could result in corrosion or rust, which may cause them to expand at a higher rate than they ought to. This could lead to cracks over time.

If your uPVC window or door lock is stiff or requires an enormous amount of pressure to turn, this could be due to many things. A defective locking mechanism, misalignment or an old handle are the most common causes of this problem.

double glazing near me is a quick and cost-effective fix that a majority of double glazing owners can do. A professional locksmith can usually fix this problem within one hour of arriving at your home. They can repair the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A professional locksmith will always be able to advise you on the most cost-effective options for your home. They can even suggest upgrades to 3 Star security TS007 euro cylinders that will provide an extra layer of security against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that deteriorate with age and use, so it's not a surprise that they can break. If yours breaks it's difficult to determine the source of the issue and make sure you fix it correctly.

Whether the problem is related to the locking mechanism inside or the latch, repairing your broken handle will increase your uPVC double glazing door's security and help you stop the draughts. If you do not repair or replace your handle can be expensive and can damage the door's frame and lock It is therefore worth taking the time to do it right.

Screwdriver Open the window remove the screw that holds the handle. The screw should be located on the inside of the backplate, usually concealed by a screw cap for aesthetic purposes. You should not lose any internal parts of the handle such as the levers and plates on either side. Keep them in the same order to make it easier to replace if necessary.

Then, rotate the handle until it's 90 degrees to the window frame and loosen the screw at the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is loose, you can take the handle off and take the broken spindle out. Replace it with a brand new spindle, ensuring that it's the same length (you can find them online or at hardware stores). Securely screw it in the correct position. Don't over tighten the screw because this could harm the handle as well as the window frame.

Close the handle and test it. The hope is that it will function smoothly and you'll be able to unlock your window.

While you're working on the handle, make sure to ensure that your uPVC windows are closing properly. If they're not closing properly cause damp and draughts in your home, as and also affecting the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure that they shut properly.

Broken Spindle


It is often the case that the spindle within a handle breaks rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the frame of the window. The handle is attached to a central rod that activates a series of locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle is broken, this can be a very frustrating issue.

Fortunately there are ways to remedy this situation. A reputable locksmith can swiftly and effectively fix the issue. A good locksmith will be able to disassemble the window's handle using a tool to remove the wheel from the area that houses the spindle. This is done without damaging the handle or causing any other damage to the window frame.

Once the wheel is removed the technician can then inspect the spindle to determine what caused it to break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. This procedure is typically carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that could be hindering its normal functioning. After that the spindle is cleaned, it can be repaired or replaced. If it's being replaced, the technician can take an identical dowel size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired, it might require replacement completely. Home centers sell generic replacements however if your window design is unusual then you'll require contacting an expert in woodworking or cabinet making who can recreate the exact component. After the spindle is installed, it is connected to the handle. Line up the screw holes on the handle with the screws already in the frame. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Homepage: https://postheaven.net/jailsubway8/a-step-by-step-guide-to-double-glazing-window-repair