Notes

What A Weekly Replacing Upvc Window Handles Project Can Change Your Life
Replacing uPVC Window Handles

The replacement of window handles made of upvc is a fairly straightforward job. The most important thing is to ensure that the replacement handle fits the spindle carved out in the window mechanism.

If you follow the steps below the handle of any cockspur will fit most windows. The step height of the handle is crucial.

What to look for

As time passes, uPVC handles on many windows in the UK can start to show signs wear and tear. If this happens, the window handle may become loose or difficult to operate, which makes it necessary to replace it. This is a relatively easy task that is achievable by anyone who is comfortable with basic hand tools.

The first step is to ensure that the handle is securely attached to the frame of the window in the open position. The next step is to find the fixing screws or pins that hold the handle in the position it is in. They are usually on the inside of the handle. They can be removed using an screwdriver or pliers.

Once the handle is loose it can be taken from its hinges by gently pulling off. Then, upvc door handle will need to find a new handle in the same style and size. This can be done online or in an area DIY store, and the process should only take about five minutes with a screwdriver.

When replacing a uPVC handle, it is important to consider the step height. This is the distance from the bottom of the handle to where it rests on the frame of the window. This is a standard measurement and you should confirm the height of the step prior to ordering a replacement handle.


There are several sizes depending on the type of handle. Inline handles for uPVC windows generally have lug centres of 31mm as well as cockspur handle types that have 43mm centres. Tilt and turn handles are typically found on uPVC windows, and they feature a specific design that allows windows to be tilted in to allow for ventilation, and then turned to open the window completely.

The most frequent uPVC handle cracks are internal, rather than a fracture from the base. This makes them difficult to open, and it is therefore crucial to ensure that the replacement handle you purchase has the same length of spindle that your current one.

Remove the old Handle

A poorly fitted or damaged window handles could cause your double-glazed windows to close or open in a way that isn't correct and may result in them getting stuck. There are a variety of reasons including general wear and tear or the corrosion of the handle made of metal. In these instances it is essential to replace the upvc window handle as soon as you can to prevent further damage or loss of function.

One of the first steps to do when replacing upvc window handles is to remove the old handle from the window. Start by removing the screw covered by the handle while it is in the closed position. Once you have removed the screw, you are able to remove the handle. You can make the job easier by using an electric screwdriver.

It is also important to note that the screws on the handle could be hidden behind plastic caps, therefore it is recommended to use an Stanley knife to the screw caps and then remove them. After removing the handle, you will have to examine the square cutout on the base to ensure that the new handle for the window lock is compatible. It is essential to measure the spindle length on the handle you used to replace it with and then compare it with the dimensions of the window mechanism spindle cutout.

The different kinds of upvc window handles are: Espag handles, which have a central screw and can be turned left or right; Cranked handles that have two screws and are typically found on tilt and turn windows made of upvc and Spade handles that have an arm that is flat and can be placed on either side of the window. Once you have a suitable replacement, it is simply a case of screwing the handle in place and making sure that the spindle is fitted into the lock mechanism. Once this is done, it should be tightened to the window frame and the replacement upvc window handles should be secure.

Measure the Spindle

If you're replacing a Upvc window handle that has slipped off, it's likely because the spindle that holds it in place has become loose or damaged. In some instances, it can be fixed with screws or pins to secure it. In other situations, it will require replacement completely. There are a variety of handles made of upvc. They include espagnolette handles inline, cockspur handles, and tilt and turn handles. Each kind has a distinct method of installing and removing the handle.

It is essential to measure the current handle before buying a replacement. This will ensure that the handle fits the window in a proper manner and be the correct size. All handles are calibrated according to industry standards, making it easy to find the correct size.

To determine the size of the handle you must turn the window to the open position. You should be able to determine the dimensions of the pin or screw that holds the handle. Then you can use a ruler or tape measure to determine the length of the spindle. Once you know the length of your spindle it is possible to buy a replacement of the exact same length.

When you are looking to replace a handle, it is important to consider the step height of a upvc window handle. The step height is the distance from the bottom of the handle until where it rests on the frame. In general, this is approximately 21mm for uPVC windows, and 9mm for aluminum. To ensure that the new handle is suitable the gap, drop something into the space to determine how far it extends before it meets an obstruction.

Cockspur handles may have different backsets based on the type of window you put them in. Inline Espag handles have an average height of 43mm from centre to centre (2 fixing points). Cockspur handles, however have different backset heights according to the design of the window they are in. This is due to the fact that they have a spur which extends from the handle and is locked onto a cockspur wedge-striking plate.

Install the new handle

Once you've selected the new handle, align it carefully with the holes for screws on the door. Then secure it using the screws provided. Install the latch lever similar fashion to the main handle when you're replacing the door handle. Then, you can attach the door trim again to conceal the screws for mounting.

Tips: To take the head of the metal from the wooden wedge, hold the handle so its longer end is resting on the floor. Then use a hammer to tap the thin end of the handle. Be careful not to damage the handle or the handle spindle.

Read More: https://www.repairmywindowsanddoors.co.uk/farnborough-windowrepair/