Notes

Your Family Will Be Thankful For Having This Replacing Upvc Window Handles
Replacing uPVC Window Handles

The replacement of window handles made of upvc is an easy job. The important thing is to make sure that the replacement handle fits the spindle that was cut out of the window mechanism.

If you follow the steps below the handle of any cockspur will fit on most windows. The most important thing is the step height of the handle.

What to look for

Many of the windows in the UK come with uPVC handles and, over time, they may begin to show signs of wear and wear and tear. If this occurs, the window handle could become shaky or difficult to operate, which makes it essential to replace it. Anyone who is comfortable with basic hand tools is able to complete this task.

The first step is to ensure that the handle is securely attached to the frame of the window and in the open position. The next step is to find the fixing pins or screws that hold the handle in place. They are usually on the inside of the handle. They can be removed with the screwdriver and pliers.

When the handle is loose and sagging, gently pull it back from its hinges. It is then necessary to locate a replacement handle that is the same design and size. This can be done at an online store or in a DIY store. The process should take about five minutes and a screwdriver.

One crucial aspect to take into consideration when replacing the uPVC window handle is its step height. This is the distance between the handle's base and where it sits in the frame of the window. This is typically an accepted measurement, however it is essential that you examine the step height of your existing handle before purchasing a new one.

There are a variety of sizes based on the kind of handle. Inline handles are available for uPVC windows with centers of 31mm for lugs, while cockspur handles have centers of lugs of 43mm. Tilt and turn handles are often used on windows made of uPVC, and they feature a specific design that allows windows to be slid up for ventilation, and then rotated to open the window fully.


The most common breakage in uPVC handles is that they crack internally rather than breaking off from the base section. This can make it difficult to open. It is essential to ensure that any replacement handle is fitted with the same spindle that was used in your original one.

Take off the handle from the old one.

Incorrectly installed or damaged window handles could cause your double glazed windows to close or open in a way that isn't correct and may cause them to become stuck. There are upvc replacement door handles like general wear and tear, or corrosion of the handle. In these instances it is essential to replace the window handle as soon as you can to avoid further damage or loss of functionality.

One of the first steps that you should do when replacing the handles on your windows made of upvc is to remove the old handle from the window. Start by removing the screw covered by the handle while it is in the closed position. This should reveal another screw, and once it is removed, you are able to begin to remove the handle itself. It is recommended to make use of an electric screwdriver for this since it will make the task much easier and quicker.

It is also worth noting that the handles' screws could be hidden behind plastic caps, therefore it is recommended to use an Stanley knife to the screw covers and remove them. After the old handle has been removed, you must look at the square cut out at the handle's base to ensure that the new window lock handles will work with it. It is crucial to measure the length of the spindle on the handle that was used and then compare it with the dimensions of the window mechanism spindle cutout.

The different kinds of upvc window handles are: Espag handles, which have a central screw and can turn left or right; Cranked handles with two screws, and are typically found on tilt and turn windows made of upvc; and Spade handles, with a flat arm and can be placed on either side of the window. When you have a suitable replacement, it is simply a case of screwing the handle in place and making sure that the spindle is correctly inserted into the lock mechanism. Once that is done then it is time to secure it to the window frame and the replacement upvc window handles should be secure.

Take a look at the Spindle

If you need to replace a handle made of upvc that has collapsed, it's likely the spindle that holds it in place is damaged or is loose. In some instances, it can be fixed by using pins or screws to tighten it. In certain situations, it may be necessary to replace the handle. There are several types of upvc window handles. There are three kinds of handles: inline espagnolette tilt-and-turn, and cockspur. Each handle type is installed and replaced in a different manner.

It is crucial to measure the handle prior to purchasing the replacement. This will ensure that the new handle is the correct size and will fit correctly within the window. Luckily, all handles conform to industry standards for sizing, so it's fairly easy to find the right size.

To measure the size of the handle you must turn the window to the open position. You should be able see the dimensions of the screw or pin that holds the handle. Use a ruler or a tape measure to determine how long the spindle is. Once you know the length of the spindle you can purchase a replacement one that is the same length.

The step height of a upvc window handle is another factor to consider when purchasing a replacement. The step height is the distance from the bottom of the handle to where it rests on the frame. Typically, this will be about 21mm for uPVC windows, and 9mm for aluminium. Dropping something into the gap will let you determine how far the handle extends before it reaches an obstruction.

Cockspur handles often have different backset heights depending on the style of window they are installed in. Inline the espag handle heights range from 43mm from centre to centre (two fixing points). Cockspur handles have different backsets depending on the window they are located in. This is because they have a spur that extends from the handle and locks onto a cockspur wedge striking plate.

Fit the New Handle

After you have chosen the new handle, ensure that it is aligned with the holes for screws on the door. Then secure it using the screws supplied. If you're replacing the latch lever, it can be installed in a similar way to the main door handle. Then, attach the door trim once more to hide the mounting screws.

Tips: To remove the metal head from a wooden wedge, place the handle on the floor, so that its wide end is level with the ground. Then, use a hammer and tap the thin end. Be careful not to scratch the handle or handle spindle.

Here's my website: https://www.repairmywindowsanddoors.co.uk/aldershot-windowrepair/