Notes

The Reason Replacing Upvc Window Handles Is So Beneficial During COVID-19
Replacing uPVC Window Handles

Changing upvc window handles is a fairly straightforward task. It is important to make sure that the replacement handle fits the spindle carved out in the window mechanism.

If you follow the steps below, any cockspur handle will fit most windows. The height of the step of the handle is crucial.

What to look for

As time passes, uPVC handles on many windows in the UK can start to show signs of wear and wear and tear. When this happens, the window handle can become loose or difficult to operate, which makes it necessary to replace it. Anyone who is familiar using a basic hand tool is able to complete this task.

The first step is to make sure that the handle is securely attached to the frame of the window and in its open position. The next step is to locate the pins or screws that hold the handle. They are usually located on the inside of the handle and can be removed with a screwdriver or pliers.


Once the handle has become loose and sagging, gently pull it back from its hinges. Then, you'll need to locate a new handle in the same style and size. This can be done online or in the local DIY store and should take five minutes using the help of a screwdriver.

When replacing the handle on a uPVC handle It is crucial to consider the step height. This is the distance between the handle's base and where it sits within the frame of the window. This is a common measurement and you should check the step height before ordering the replacement handle.

Depending on the type of handle you are using there are various sizes to choose from. Inline handles can be found for uPVC windows with lug centres of 31mm, while cockspur handles have lug centres of 43mm. Tilt and turn handles are typically found on windows made of uPVC and they feature a specific design that allows windows to be tilted for ventilation, and then rotated to open the window completely.

The most common cause of breakage in uPVC handles is that they crack inside rather than breaking off from the base section. This makes them difficult to open and therefore it is crucial to ensure that any replacement handle you buy has the same length of spindle as your existing one.

Remove the old Handle

If the handles on your windows are damaged or incorrectly fitted, they could cause double-glazed windows to open and close incorrectly. They could even become stuck. This can be caused by a number of factors, including general wear and tear on the metal handle or corrosion. In these instances, it is important to find replacement window handles made of upvc as soon as possible in order to avoid further damage and loss of functionality.

When replacing upvc windows handles it is recommended to remove the old handles from the window. To do this, begin by removing the screw that is covered when the handle is in the closed position. This will reveal a screw, and once it is removed, you can then begin to remove the handle itself. You can make the process simpler by using an electric screwdriver.

It is also important to note that the handles' screws could be hidden behind plastic caps, so it is recommended to take an Stanley knife to the screws and take them off. After removing the old handle, you'll have to examine the square cutout on the base to make sure that the new handle for the window lock is compatible. It is important to measure the spindle length on the old handle and then compare it with the size of the window mechanism spindle cutout.

The various types of window handles made of upvc are: Espag handles, which have a central screw and can turn left or right; Cranked handles with two screws, and are typically found on tilt and turn upvc windows; and Spade handles, that have an arm that is flat and can be placed on either side of the window. It is easy to replace the handle once you've located one that is suitable. Just put it in place and ensure that the spindle is inserted correctly into the lock mechanism. Once you have done this, tighten the handle to the window frame. Your replacement upvc handles will now be secured.

Take a measurement of the Spindle

If you're replacing a upvc window handle that has come off, it's because the spindle holding it in place has become damaged or loose. In certain situations you can tighten the spindle using pins or screws. In other cases it will have to be replaced completely. There are a variety of handles made of upvc. They include espagnolette handles that are inline or cockspur handles. They also have tilt and turn handles. Each type of handle is mounted and replaced in a different fashion.

Before buying a replacement handle it is essential to know the dimensions of the handle that is currently in use. This will ensure that the new handle is of the correct size and fits into the window. Luckily, all handles conform to industry standard sizing so it's relatively easy to identify the correct size.

To measure the size of your handle first, remove it from the window by turning it back to the open position. You should then be able to determine the size of the screw or pin that holds it. Use a ruler or a tape measure to determine how long the spindle is. Once you know the length of the spindle you can purchase a new one that is the same length.

The step height of a upvc window handle is also important to consider when you are buying replacements. The step height is the distance from the bottom of the handle to where it sits on the frame. This usually is about 21mm or 9mm for aluminum and uPVC. To ensure that the new handle will fit the gap, drop something in the gap to see how far it extends before meeting an obstruction.

Cockspur handles can have different backsets based on the type of window you put them in. door handles come with an average height of 43mm centre to centre (2 fixing points). Cockspur handles have different backsets, based on which window design they are located in. This is because they have a spur which extends from the handle and is locked onto a cockspur wedge-striking plate.

Install the New Handle

When you've picked a new handle, ensure that it is aligned to the screw holes in the door and secure it with the screws supplied. Install the latch lever in the same way as the handle on the main handle if you are also replacing the door handle. After that, attach the door trim again to conceal the screws for mounting.

Tip: To remove a metal head from a wooden wedge, place the handle on the floor, so that its wide end is level with the ground. Then use a hammer and tap the thin end. Be careful not to scratch the handle or the handle spindle.

Website: https://www.repairmywindowsanddoors.co.uk/sidcup-windowrepair/