Notes

Fitting a Cat Flap
Fitting a cat flap can appear daunting, but it is fairly simple to install with the proper instructions. Firstly, determine how high you want the flap to be (on average or belly height). Then, mark this area on the door, and use the template provided as a guide to drill.

If you have a kitten, or a young kitten, prop the door open very slightly and gradually encourage it to pass through. Reward it as it passes through.

Take a measurement of the door

A cat flap allows your pet to go in and out of your home at its convenience. This can help keep your cat healthy since it will ensure that it is getting enough exercise and also be able to return inside if it gets trapped in the elements during bad weather. It can also reduce the amount of time you need to allow it in or out and will also help ensure your home is secure by allowing you to know when it's been out.

However, it is important that the cat flap is properly fitted to stop your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is important to measure your pet's belly height and the doorway of your house so that you can ensure that the flap is at the proper height. If your cat is a little longer or taller than the average, you can adjust the flap's height by moving it up or down by a tiny amount.

The next step is to use a spirit level to mark the center of the door. This is where you will install the flap. Then, using the mark as a guideline, cut out the shape of the flap using a Jigsaw. After you have cut the area out and sanded the edges to create smooth surfaces. Drill any holes you need to.

Installing a cat flap ought to not take more than two hours. However, the process may be a little more complicated if you need to fit it inside the door of a uPVC or composite door because these doors come with various thicknesses which can affect how the holes are cut and what they are fixed to. This is the reason we recommend hiring a professional to carry out the job, particularly when you've never dealt with glass before.

Measure Your Cat

You can save yourself hours of listening to the cat's meows to be let in or out. This is particularly helpful when your cat is inside during the winter months while you work.

If you want to fit a cat flap inside your door, it is crucial to determine the size of your cat prior to beginning the task. While it may seem to be a simple task, it is essential to measure the right way or your cat will find it difficult to use.

First, make sure your cat is calm before you begin taking measurements. You'll need to hold them in a position where they are not able to move, and make sure that the measuring tape or ruler is flat against their body, not arching in any places. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat's body, it's time to look at the door and decide on where to put the flap. The flap should be placed at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also stop the flap making a lot of noise as it swings open and shut.

You will need to consider the thickness of the uPVC or composite door, as well. Although timber doors are of the same thickness, uPVC and composite doors are different in their overall construction, which can make fitting a cat flap more complicated since you have to make sure that the hole you cut is the correct size for your pet.

You can also use the template drawing included in the instructions to mark the location of the hole in the door. This will help you to determine where the opening must be and also make sure the template is placed correctly on the door. It is also helpful to utilize a spirit-level to make sure that the template is placed in a straight line against the door.

Cut the Flap

You'll need to make an opening in the door panel to install your cat flap prior to you can put it in place. This can be a challenging task and it is recommended to seek the help of a professional cat flap fitter to complete this task in case you don't have the skills or experience to do it yourself. You can also refer to the instructions provided in the kit to find out how to do it right.

You can take the height of the cat's or kitten's stomach as a guide. As a rule of thumb you should place the flap approximately 10-15 centimeters above the ground. This is the typical height of the stomach for cats. This will allow your cat to move through the flap easily and will make it difficult for other cats or nosy neighbors to get in or out.

Draw the location of the cat flap on the door with a pencil. Next, if your kit includes an outline of paper, place it on top of the door and use the markings to drill holes in every corner of the template. Then, you'll be able to cut out the template and replace it with the flap for cats.

You can put in your cat flap yourself inside an uPVC or wood door if you are confident with the jigsaw. Be sure to not cut into any of the door's mullions, or vertical rails. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Take your time, and don't force the jigsaw into cutting faster.

After the hole has been cut, carefully place the cat flap in its new home. Make sure it's firmly secured. If it has screw caps, then push these onto the screws that protrude. Once the screws are in place, sand any rough edges of the cut then apply sealant around any gaps to ensure there aren't any draughts entering into your home.

Install the Flap

If you have a standard cat flap, you can help your pet through it by placing a small amount of cat food on the outside of the door. Alternately, you can push the cat through with your hand or a stick. Once your cat is accustomed to walking through the flap, it will be able to come and go whenever it wants. cat flap fitting lets you let it in and out as it wishes.

It is possible to install an animal flap into the UPVC doors or glass door, however it might not be as simple as installing one in a wooden external door. This is due to the fact that the UPVC doors and certain types of glass doors don't have a uniform thickness. This can affect how you cut the hole for the flap and could affect the way your flap is fitted correctly after it has been put in place.

Based on the type of cat flap you select, it may be equipped with a mounting kit as well as a template that will tell precisely where to drill holes for it. If the kit doesn't include a template, you are able to make one on your own. When cutting, it's crucial to keep the jigsaw from being pushed too far enough to create a bigger hole than you need in your door.


Some cat flaps are available in circular shapes, which are more difficult to put in. If you have a round flap, make sure the hole is located in the correct place on your door. If not, your cat may not be able to use it, and could be locked outside for the entire day (or at night).

Certain cat flaps come with locks that allow you to regulate when your cat is allowed to enter and leave. This is useful if your pet is afraid of going out in the dark, or coming back inside at night. They can also be helpful if you work all day. The lock can be engaged to allow or deny entry, and some are locked in both directions, which allows you to close the door completely. This is especially helpful for older or ill cats who don't want to go out in rainy weather.

Website: https://www.repairmywindowsanddoors.co.uk/cat-flaps-caterham/