Notes

Fitting a Cat Flap
It might seem daunting to install a cat flap, but with the right instructions it's not that hard. Determine how high you would like your cat flap to be (normally it's at the belly height). Then, mark this area on your door and then use the included template to guide you when drilling.

If you have a kitten who is still a newborn, gently prop the door slightly open and invite it to go through. Reward the kitten as it goes through.

Measure the Door

A cat flap lets your pet to go in and out of your home at any time. This can help keep your cat healthy by ensuring that it gets exercise and also being able to get back in if trapped outside in bad weather, especially in winter. It can also reduce the amount of time you'll have to spend letting it in or out and will also help ensure your home is secure by letting you be aware of when it went out.

However, it is essential that the flap on your cat is properly fitted to stop your pet from escaping through it or be pushed through by other animals (e.g. dogs). You should determine the height of your pet's belly as well as the width of the doorway in your home to make sure the flap is at the proper height. You can adjust the position of your flap when your cat is taller or smaller than average.


The next step is to use a spirit level to mark the middle of the door. This is where you'll install the flap. Then, using the markings as a guideline, cut out the shape of your flap using the help of a jigsaw. Once you've cut the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes needed.

The process of installing a cat flap is not as difficult as you may think, and it shouldn't take more than two hours to complete the entire task from start to finish. However, the process may be slightly more complicated if you need to fit it into the door of a uPVC or composite door since these doors come with a wide range of thicknesses which can affect how the holes are cut and the type of door they are fixed into. This is the reason we recommend calling an expert to do the task, especially in the event that you've never worked with glass before.

Measure Your Cat

You can avoid hours of ignoring the pet's meow to be let in or out. This is especially useful for cats that are in the house during all seasons while you are at work.

It is important to first measure your cat before attempting to install. Although it might seem like to be a simple task, it is important to make sure you measure correctly or your cat may be unable to use.

First, make sure that your cat is calm before taking measurements. You'll need to keep your cat in a place in which they cannot move. Also, make sure that the measuring tape is straight and not bent against their body. Holding the ruler or measuring tape against their body from the top of their head to the base of their tail will enable you to get an precise measurement.

Once you have the measurement of your cat, it's time to look at the door and decide where to place the flap. It is advisable to position the flap in the middle of your cat's belly because it will allow them to pass through it with minimal effort. This will also stop the flap from making too much noise when it swings back and forward.

You will need to think about the thickness of the uPVC or composite door too. While all timber doors have the same thickness to them, uPVC or composite doors are different in their overall design. This could make the process of fitting a flap for your cat more difficult since you have to make sure that the hole is of the correct size.

It is also worthwhile studying the instructions that come with the kit to locate an illustration template that can be used to determine the location of the hole inside the door. This will enable you to determine where the hole should be located and ensure that the template is positioned correctly on the door. Using a spirit-level to check that the template is flush against the door will also prove beneficial.

Cut the Flap

You'll need to cut a hole in the door to accommodate your cat flap before you can install it. This is a difficult task and it is recommended to seek the help of a professional cat flap fitting service for this job if you don't have the knowledge or skills to do it yourself. You can also refer to the instructions included in the kit to find out how to do it correctly.

You can take the height of your cat's or kitten's stomach as a reference. A good rule of thumb is to place the flap around 10-15 centimeters away from the ground since this is roughly the average height of the cat's belly. This will allow your cat to pass through the flap with ease and make it more difficult for other cats or naughty neighbours to enter or exit.

Once you've decided the best location for the cat flap to be positioned, mark this location on the door using the help of a pencil. If your kit includes an outline of paper, place it over the door and use the marks to drill holes in each corner of the template. Then, you should be able to cut out the template and replace it with the cat flap.

If you are installing your cat flap in the form of a door made of wood or uPVC, it is possible to do it yourself if you feel confident enough to handle the Jigsaw. Make sure you don't cut through any of the door's mullions, or vertical rails. You can use a jigsaw to cut your panel into a square or a circle depending on the way you'd like to cut it. Remember to take your time and don't try to force the jigsaw into cutting faster.

Once the hole is cut, carefully place the cat flap into its new place of residence. Make sure it's solidly secured. If it has caps for screws, then put these onto the protruding screws. Once the screws are in place, sand the rough edges of the cut, and then apply sealant to any gaps to ensure there aren't any draughts getting into your home.

Place the Flap

If you have an ordinary cat flap, you can try to encourage your pet to use it by placing a small amount of cat food on the outside of the door. You can also try pushing the cat through with your hands or with a stick. Once your cat has become comfortable moving through the flap, it will be in a position to move as it pleases. This will allow you to let it in and out whenever it wants.

It is possible to put a cat flap in the UPVC doors or glass door, however it might not be as simple as putting one inside a wooden exterior door. This is due to the fact that the UPVC doors and certain types of glass doors do not have a uniform thickness. This could have an enormous impact on the way you cut out the flap's hole, and whether the flap fits correctly after installation.

The mounting kit could contain a template that outlines the best places to drill holes. If the kit doesn't include an example you can use a photocopier to create your own. cat flap installation is important not to press the jigsaw too hard when cutting, so that it doesn't leave a bigger than necessary hole in your door.

Some cat flaps come in circular shapes, which can be more difficult to put in. If you have a round flap, ensure that the hole is located in the correct spot on your door. Otherwise, the cat might not be able to access it, and may be locked outside for the entire day (or at night).

Some models of cat flap come with locks that permit you to control the time your cat comes and goes. This is useful for pets who are afraid of going out in the dark, or coming back inside at night. They can also be useful if you work all day. The lock can be engaged to allow or deny entry, and some can be locked in either direction which allows you to close the door completely. This is especially beneficial for sick or elderly cats who aren't willing to go out in the rain.

Here's my website: https://www.repairmywindowsanddoors.co.uk/salisbury-cat-flap-installer-near-me/