Notes

Fitting Cat Flap in UPVC Door Panel
Cat flaps allow your pet leave and come whenever they want without you having to let him in or out. They also can help stop your cat from urinating inside the house.

Fitting a cat flap in the door panel made of upvc is much easier than in glass doors, however it requires some knowledge and the appropriate tools.

Measure the Door

Fitting a cat door in the front door is difficult however, so long as the cat flap is of the right type and you follow the instructions, it shouldn't be too difficult. We will help you draw the shape using an jigsaw to cut out the door's area. Then we will finish the job by affixing the cat flap. This will ensure that the flap remains in place and protects the door from wind and rain which can cause damage.

The first thing to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap you'll require. This will allow you to select a flap that is big enough for your pet to walk into the house and exit without having to open the door every time.

Once you have the measurements you can mark where on the door the template should be placed, typically this is done using an X. However, some kits include drawings that show where to drill, if yours does then stick it to the door and use a pencil to draw around the door. If your door has sill or moulding on the bottom of it ensure that you have enough space to ensure your cat's safety and stop them from gaining access to your home.

Then put on your eye protection and dust mask and using a jigsaw, begin cutting according to the lines you penciled in, don't try to push the blade too hard because this can cause it to cut faster than you'd like it to. If you own a set square then use it to ensure that you are cutting correctly and to make sure the hole is a good rectangular shape. Once you are happy with this you can start to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet in and out without having to worry about unwanted visitors or unwelcome gifts. It also reduces drafts and helps to keep the temperature in your home stable. Installing a cat flap on your door might seem difficult for those who haven't attempted it before. Many people call an expert carpenter or joiner to complete the job. While this is definitely an option, it is possible to complete the task yourself if you have the right tools and follow the instructions with care.

While this is much simpler to accomplish when using a timber door it is still possible to do this in uPVC doors, but you should be careful not to scratch the doors since this could end your warranty. The first step in the process is to measure the door, ensuring that it will fit the new cat flap. If you have a standard uPVC panel it's easy. However, if your door is composite or a different type of door, you might have to be more cautious.

The next step is to determine the belly height of your cat. This is the height from the floor to the lower part of the cat's stomach and you'll need find a spot on the door where this measurement will fall within the range your cat can comfortably pass through. Once you have this information, you will need to mark out the area using an eraser and a spirit level so that you can be sure that the hole you make will be a good fit for your cat.

After you have marked the area, you're now ready to cut the hole. You will require a jigsaw and it is important that you take your time in order to ensure that the cuts are smooth and straight, rather than rough and uneven, as it could cause damage to your door. Wear safety glasses and a dust mask while using a Jigsaw. Inhaling sawdust is dangerous for your health. After you've finished the cutting process, you will need to smooth out the edges of the hole with sandpaper so that your cat flap can be fitted easily.

Cut a hole

It can be a challenge to fit an animal flap on a door panel or sealed double glazing unit. If you are not very proficient in DIY, it is recommended to hire a professional to do the job for you. A shoddy job might not only look ugly, but also an issue for security as well as allowing cold air to enter when the cat is outside and hot air to escape when inside.

The first thing you need to do is mark the location of the hole in the door using a pencil and an ax level. This will ensure that it is properly positioned and that it runs parallel to the other parts of the door. Make sure to have sandpaper in your possession to smooth any rough edges.

After the line is marked you should cut out the hole using the jigsaw. Remember to wear any safety equipment when working with an electric tool. If you are concerned about the sound of the jigsaw, you can purchase a cordless version which is quieter and more user-friendly to use.

It is essential to only cut away the material needed to fit the cat flap. A small amount of material will be needed to cover the thickness of the wall of the cat flap itself but removing more than that can cause problems and even cause damage to the door frame.

A door made of upvc may have a metal frame or a panel inside that will interfere with the microchip cat flap, and if this is the case you'll need to cut an over-sized hole to ensure that the metal doesn't touch the the cat flap. If this is done, it is crucial to fill in the oversize gap and render it watertight.


If you're installing an animal flap to an upvc door or a double glazed window with a metal frame then you'll need to speak to a specialist who can provide you with a new glass pane with the hole for the cat flap premade in it. It is much less expensive to get this done rather instead of trying to install a cat flap into an existing pane of glass that hasn't been designed specifically for this purpose.

Install the Flap

Cat flaps let your pet move around as they please, giving them the freedom to lounge inside the house whenever they're feeling like it. However, if you have an uPVC door, it may be difficult to put in a cat flap, especially in the absence of glass panes that can be cut for one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add an additional cat flap. It's not as easy as cutting a hole through the door, however there are a few things you'll need to take care of first to ensure that it's safe.

A composite, uPVC or GRP door panel is typically comprised of a thin plastic skin that is bonded to an insulating polystyrene core. It is crucial to be cautious when cutting the material. This kind of door typically comes with a template drawing which you can use as a reference to cut the hole in your door.

After cat flap fitters near me 've marked the position of the hole in your door, now it's time to install the flap. You can pick from a variety of designs, from simple push-button flaps to microchip-activated ones that allow your pet in. However, regardless of what kind of cat flap you pick, it is essential to ensure that your cat can comfortably use the flap and not get trapped outside in bad weather.

It's a good idea to choose a circular fitting rather than one that is square, because circles are more securely cut into the door glass. This is because square holes are more likely to break the glass when they're drilled. This is also a safer option since you don't have to drill into the toughened glass, which could shatter and harm your pet or family members. This is especially crucial if you have a young or elderly person in your home who could be injured by shards of glass.

Read More: https://www.repairmywindowsanddoors.co.uk/bournemouth-cat-flap-installer-near-me/