Notes

11 Ways To Completely Revamp Your Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Maybe the window or door handles don't meet up correctly or are difficult to use.

It is crucial that your double-glazed doors work smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

It can be a hassle when a key gets stuck into a lock. double glazing repairs could also be an issue for security, since the door may not lock and make you open to intrusion. There are fortunately quick fixes you can use to solve the problem and get your door operating properly once more.

Remember to remain calm. If you get scared and start playing around with your keys you may end up pushing the broken piece of the key deeper into the lock, which could make the situation worse.

Next spray WD-40 or a different penetrating oil into the lock to help the broken piece slide out more easily. You can also make use of a screwdriver to break up any pieces stuck that could be blocking the way. If you happen to have a bit of the key that is hanging out and you want to remove it, use a paperclip or some other metal object that is thin to grab it and remove it. Both of these methods work well, but be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you don't have any of them available, you can use needle-nose pliers to bend them and create hooks. You can also use a pair of tweezers grab and remove the remaining pieces of broken keys.

If you are unable to get the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture present in the lock.

If none of these solutions seem to work, it might be time to contact a locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair via our website, or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose a serious security threat. It's a good thing that it's a simple repair for professional locksmiths to complete. A locksmith must tap the cylinder to repair it. This can be done with the hammer or other tool. However, the most effective method is to use a wire or a long match. The match or wire's end in the keyway. After this, the locksmith will strike the lock and break it open. This is far better than using a heavy hammer that could harm the lock.


The most common cause of cracks in the cylinder head is overheating. This can occur when the cylinder head and block are made of various metals such as cast-iron and aluminium. Different metals will be heated and cool at different rates. This could cause localized hotspots to expand quicker than the rest.

Corrosion can be a reason for fractures in cylinders. If the head and block of a cylinder are not maintained in a timely manner they may corrosion or rust, which can cause them to expand faster than expected. As time passes, this may also cause cracks.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn it could be due to a variety of causes. A malfunctioning locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.

This is a straightforward and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith can usually solve the issue within one hour of arriving at your home. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes based on the specific requirements of your home. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which give you an extra layer of protection from burglars. It's a small price to pay for the peace-of-mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks may break. They have complex mechanisms that become less effective over time. If yours breaks it may be difficult to pinpoint the cause of the issue and make sure that you repair it correctly.

Repairing your damaged handle, whether it's the internal locking mechanism or latch can increase the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing your handle can be very costly and may cause damage to the door's frame and lock, so it's worth taking some time to do it correctly.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate, usually hidden by an eye-catching cap to conceal it for aesthetic purposes. Be sure to not lose any internal components within the handle, like the plates or levers on either side of the spindle. Ideally, keep them in the same place so you can replace them again in the event of a need.

Then, rotate the handle to make it 90 degrees to the window frame and loosen the screw on the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is removed, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, making sure that it's the same size as the old one (you will typically find them online or in hardware stores) and securely screw it in the right place. Do not tighten the screw too much because this could damage the handle and the window frame.

Check that the new handle is fitted after which you can close and test the handle. Hopefully, it will work smoothly and you'll be able unlock your window.

While you're working on the handle, be sure to make sure your uPVC windows are closing properly. If they're not, you could experience damp and draughts inside your home as in addition to compromising your home's energy efficiency. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they can shut properly.

Broken Spindle

It is more common for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is attached a central rod that triggers the cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has been damaged, this can be an extremely frustrating issue.

Fortunately there are ways to remedy this situation. A good locksmith can quickly and effectively address this issue. A good locksmith will be able disassemble the handle of the window by using a tool that removes the wheel from the area that houses the spindle. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel is removed the technician can then examine the spindle to determine what has caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as well as any particular areas of wear or damage. This process is usually performed by technicians in an environment that is clean.

The next step is to clean the damaged spindle, this will remove any dirt or debris that might be obstructing its normal functioning. The spindle could be repaired or replaced. If it's being replaced, the technician will need the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This ensures that the new spindle has an exact fit with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centres sell generic replacements, but if the style of your window is unique then it will be necessary to find a woodworker or cabinet maker who can duplicate the exact part for you. Once the new spindle is installed, it can be fitted to the handle by lining up the holes for screws in the handle with the frames existing screws. Once the handle is firmly in place, you can use your uPVC windows.

Homepage: https://marvelvsdc.faith/wiki/Its_The_One_Blown_Double_Glazing_Repair_Trick_Every_Person_Should_Learn