Notes

10 Misconceptions That Your Boss May Have Concerning Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs


Has your uPVC window or door mechanism started to fail? Perhaps the window or door handles don't meet up correctly or are difficult to use.

It is essential that your double glazed doors function smoothly, or else you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at reasonable costs.

Snapped Key

If a key breaks in a lock, it could be incredibly annoying. This can also be a security risk, as it may make you vulnerable to an intruder if the door does not lock. There are a few quick fixes you can make to resolve the issue and make your door work again.

The first step is to remain calm. If you get scared and start playing around with your keys you may end up pushing the damaged piece of the key further into the lock, making the situation even more difficult.

Spray WD-40, or another penetrating lubricant into the lock. This will assist the broken piece be removed more easily. You can also use the screwdriver to break any pieces that are stuck. If you have a part of the key that is still sticking out, grab it with a paperclip or other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges, which can be used to extract hooks and Jigsaw blades can also be used for this use. If you don't happen to have any of these you can bend a hook with needle-nosed pliers. Finally, a pair of tweezers can be used to grip and pull out the remaining piece of the key that was broken.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. This is usually available at all hardware stores, and it is used to freeze any moisture or ice that might be inside the lock.

If none of these solutions work, it could be time to consult a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair via our website or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose an extremely risky security issue. It's fortunately a simple repair for a professional locksmith to complete. A locksmith must tap the cylinder to fix it. This can be done with a hammer or other tool. However, the best method is to use a wire or a long match. Then, put the match's tip or wire close to the keyway. After that, the locksmith can hit the lock to break it open. This is far better than using a hammer, which could damage the lock.

Overheating is the most common cause of cylinder heads cracking. This can occur when the cylinder block and head are made of various metals, such as cast iron and aluminum. When the different metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion is a different cause of cylinder fractures. If the head and block of a cylinder are not maintained correctly they could corrosion or rust and cause them to expand more than they would normally. As time passes, this may also cause cracks.

If your uPVC window or door lock is stiff and requires a lot more pressure to turn it could be due to a variety reasons. This can be caused by a malfunctioning locking mechanism or misalignment, as well as a worn-out handle.

Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith can usually fix this problem within one hour of arriving at the home. Based on your requirements they can change the locking mechanism, replace the window handles, and change the gearboxes. A skilled locksmith will always be able to inform you of the most cost-effective option for your home. They can even recommend upgrades to 3 Star security euro cylinders TS007 that add an extra layer of protection against burglars. This is a small cost to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and usage, so it's no surprise that they sometimes break. It isn't always easy to pinpoint the cause of a broken window handle lock and then fix it properly.

Repairing your damaged handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing your handle can be very costly and may damage the door's frame and lock, so it's worth taking some time to do it right.

With the window in the open position and the window open, loosen the screw that holds the handle by using the screwdriver. The screw should be located on the inside of the backplate, which is usually covered by an eye-catching cap to conceal it to enhance the appearance. Be sure to not lose any of the internal components within the handle, like the plates or levers on either side of the spindle. Ideally, keep them in the same order so you can re-install them when needed.

Then, using another screwdriver take the screw off that connects the handle with the spindle at the back. Once the screw is loose, you can remove the handle and take the broken spindle out. Replace it with a brand new spindle, ensuring it's the same length (you can purchase them online or in hardware stores). Screw it into the frame. Do not tighten the screw too much as this could damage the handle and the window frame.

Close the handle and test it. It is likely that it will operate smoothly and you'll be able to unlock your window.

Be sure to double-check that your uPVC window is closing properly while you're working with the handle. If they're not then you may experience damp and draughts inside your home, as well as compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can adjust the hinges of the frames of your windows to ensure that they shut correctly.

Broken Spindle

It is often the case that the spindle in a handle breaks rather than the handle itself. This is most common in uPVC tilt and turn windows. double glazing repairs require a handle that operates an electronic locking mechanism within the window frame. The handle is connected to a central rod that triggers the mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken, this can be a very frustrating issue.

There are solutions to this issue. A reputable locksmith can quickly and effectively address this issue. They will be able to take apart the window handle using a tool that can remove the wheel part of the mechanism where the spindle is. This can be done without causing any damage to the handle or causing other damage to the frame of the window.

After the wheel has been removed the technician can then inspect the spindle and determine what caused it to break. This involves breaking the spindle into its constituent parts and carefully recording their general condition as in addition to any specific areas of damage or excessive wear. This procedure is usually done in a clean environment by skilled technicians.

Next, clean the damaged spindle. This will remove any dirt or debris which could be hindering it from functioning normally. After that, the spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. He will then drill matching holes into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired, it could need to be replaced entirely. Home centers can sell generic replacements, but if your window design is unusual then you'll have to speak with an expert in woodworking or cabinet making who can replicate the exact component. Once the new spindle is installed, it can be fitted to the handle by lining up the holes for screws in the handle with the frames existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Homepage: https://www.repairmywindowsanddoors.co.uk/gravesend-windowrepair/