Notes

How The 10 Worst Double Glazing Lock Repairs Fails Of All Time Could Have Been Prevented
Double Glazing Lock Repairs

Quality locks on your doors and windows can stop burglars from gaining entry into your home. They aren't likely breaking glass or trying to squeeze through windows.

Some double glazing owners, however, have experienced problems with their door or window lock after the installation. These issues can be resolved without the need for a new double glazing.

Broken or Faulty Locks

If your uPVC window or door lock is damaged or defective and requires a locksmith, they can fix it. They can repair the striker plates, hinges and locks on your double-glazed. They can also reposition the cylinder in order to fix any misalignment which could cause your handle to function properly.

The mechanism might be jammed when the key fits into the lock, but it will not turn or be difficult for you to insert. Dirt or grease can be trapped in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon but not oil as oil can attract dirt, and cause it to stick to the inside of the mechanism. After you have lubricated the lock, you should insert the key and then try to turn it. The lubricant will work through the mechanism and the lock should be able to rotate easily.

A damaged lock can be caused by loose screws inside the mechanism of the lock. They can loosen and fall out, or even break completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws, but care must be taken not to over-tighten them because this could damage the internal components.

A broken lock can be hazardous for you and your family. This is especially true if you have small children. They could easily open the door without your knowledge and gain access to your home. If you're concerned about this happening, a locksmith who is vetted can provide fast and efficient assistance to secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all types of faulty and broken mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Broken or Faulty Handles

As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great choice for those who are concerned about criminals who are looking to gain entry to your home. double glazing repairs is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted with the locks already in place and help keep your window firmly locked in the closed position.


It's not uncommon for handle locks to get damaged or fail. They are the first part of your window to be pushed open by criminals intent on breaking in. The good news is that this is one of the most straightforward parts to fix.

Modern uPVC and aluminium handles feature a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to lock systems that shoot bolts and again as an additional feature on all new double-glazed windows.

It is essential to fix handles as quickly as possible after it has been damaged. A damaged handle could prevent the window from closing properly and permit drafts to enter. It could also be a weakness that opportunistic thieves could exploit and put your family's possessions and your personal belongings at risk.

To repair the damaged mechanism, you first need to gain access to the window frame and then remove the damaged handle. The gearbox is then accessed to determine the type of gearbox that is used to open the handle. This will permit an alternative that is compatible with the profile and internal window frame mechanisms.

After the mechanism has been replaced the handle can be fixed with the original screws - but we would recommend replacing them with larger ones because this will ensure an even more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further corrosion. After you've completed this step your window will be functioning again at a fraction the cost of replacing it.

Hinges that are broken or damaged

If your windows don't close properly, you may suffer from draughts or an affliction of your home's security and an increased chance of damp or water damage. Window hinges that fail or fail to function properly are a common problem and are easily fixed.

If your uPVC windows don't open or shut, it is likely that hinges need to be repaired or replaced. A lot of window manufacturers will require you to purchase an entirely new window unit in order to address this problem, but we can replace the hinges to save you money.

Window hinges can often break from repeated use or they may be weakened due to corrosion over time. If you have a broken window hinge, it is essential to take steps to prevent further damage. This includes not forcing the window to close or open.

You can locate the appropriate parts for your hinge by identifying its model. The most commonly used types of window hinges include Maco, Mila, Roto and a variety of other brands. It is recommended to consult an expert in this situation to avoid the mistake of buying parts that are not compatible with your current hardware and could cause further damage.

A damaged hinge can be a huge problem for your uPVC window and doors. They can be an important source of noise, and they could also allow water to enter your windows.

To fix this issue, first make sure that the pin barrel on both sides of the hinge is aligned. If it isn't then tap the headpin using the hammer to make an incline in the hinge barrel. This will help to keep the pin in place. A friend can help you hold the doors as you remove hinge screws and hinges. Replace the hinges with ones of a matching size and attach the screws using glue. Finally put the hinges in place using clamps or weights until the glue is drying.

Once the hinges have been fixed, you should be able to put back the door and then reattach the handle. Replace the screws using wood dowels of the same size as the screw that was used to ensure that they are compatible.

Broken or faulty glass

While uPVC windows do a great job of keeping the cold out and the heat in, they are susceptible to becoming damaged over time. This can include damaged or broken glass and damaged locks. If left unattended, this can turn into a major expense. It also can detract from the aesthetics of your home and may lead to a loss of insulation, which is why it's crucial to repair any damage as soon as possible.

If the glass is broken but isn't shattered it is possible to fix it yourself with the proper tools and techniques. Make sure the area around the broken glass is free of debris, so that shards do not cause injury or cause a trip hazard. Then, take any pieces of broken glass and dispose of them properly. Apply masking tape across the entire area. This will prevent glass shards from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass it's a good idea prepare the glass before glueing it back in place to ensure that you'll have enough space complete the project.

Use a clean, dry cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing, which can vary from product to. Depending on the angle of the crack, you may need to hold the glass while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.

Once the adhesive is fully cure, carefully install the glass inside the window frame, making sure it's flush with the edges of the frame and that there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being put back in place, as this can weaken the seal and lead to condensation and water infiltration.

If you have a glass window that is broken completely or has bigger cracks, call an experienced professional glazier such as O'Brien(r) to organise an exchange. Unattended handling of broken glass can cause danger to pets and children and is why it's important to act fast.

Read More: https://www.repairmywindowsanddoors.co.uk/harpenden-windowrepair/