Notes

The Biggest Problem With Double Glazing Lock Repairs And How You Can Resolve It
Double Glazing Lock Repairs

A good quality lock on your windows and doors helps to prevent burglars from gaining access to your home. In general, they don't enjoy breaking glass or trying to wiggle through windows that are open.

However, some double glazing owners have experienced problems with their door or window lock after it was installed. Luckily, these problems are often fixable without having to pay for new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or defective, then a locksmith can repair it for you. They can fix hinges, striker plates and locks for your double-glazing. They can also adjust the cylinder's position to fix any misalignment issues which could cause the handle to not function correctly.

If the key fits in the lock, but it doesn't turn or is difficult to insert the mechanism might be stuck. This can be due to grime or dirt getting stuck within the mechanism. If this is the case, it is possible to clean the lock and lubricate it. It is crucial to make use of a dry lubricant such as teflon or graphite instead of oil, which attracts dirt and stick to the interior of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should work its way through the mechanism and the lock should be able to rotate easily.

Loose screws within the lock mechanism can be another cause of a faulty lock. They can loosen, fall out, or even break off completely, preventing the lock to perform as it should. The screws can be tightened using the help of a screwdriver. However, be careful not to over tighten them. This could damage the internal components.

A faulty lock is dangerous for your family and you. visit their website is especially true if you have small children. They could easily open the door without your knowledge and gain access to your home. If you're worried about the possibility that this might occur, a licensed professional locksmith can assist you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular requirements, meaning that in many cases replacement doors and windows are not necessary.

Handles that are damaged or broken

A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about burglars who are opportunistic and trying to gain entry to their home. It's also worth asking your locksmith about anti-lift blocks, these can be fitted with the locks already in place and help keep your window firmly locked in a closed position.

It's not uncommon for handle locks to get damaged or fail. They are the first part of your window that will be forced open by criminals intent on breaking in. The good news is that this is among the most simple parts to fix.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism known as Espagnolette that is designed to ward off forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installations. As an alternative upgrade, older handles made of aluminium or uPVC that are no longer in use can be upgraded to a shoot bolt locking system.

It is important to repair handles as quickly as you can if it's damaged. The damaged handles could stop the window from closing properly and allow drafts to enter. It could also be a weakness that opportunistic thieves could exploit and put your family's possessions and your personal belongings at risk.

To repair the damaged mechanism, you first need to access the window frame and then remove the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so a replacement can be found that matches the profile of the internal window frame mechanism.

Once the mechanism has been replaced the handle can be fixed with the original screws - however, we generally recommend replacing them with longer ones since this will provide the most secure fit. The final step is to seal the handle using a clear sealant. This will protect it from further corrosion. Once that's done, your window will be operational again and at less than the cost of replacing the entire window.

Hinges that are broken or Faulty

If your windows aren't shut correctly, draughts may be able to enter, your home's security barriers will become weaker and there's an increased risk of damp or water damage. Window hinges that fail or fail to function properly are a common occurrence and can be easily repaired.

If you have a window made of uPVC that won't open or close, it's likely your hinges are broken or damaged and need to be replaced. Most window companies will require that you purchase an entirely new window unit to address this issue, but we can replace the hinges and save you money.

Window hinges can often break due to repeated use or might be damaged through rust over time. In the event of a broken hinge, it's crucial to take measures to prevent further damage by taking care not to make the window swing to open or close.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all window hinges. It is recommended to speak with an expert in this regard to avoid the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.

The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a significant source of noise and also allow for water infiltration which could damage your windows.

To resolve this issue, first check that the pin barrel on both hinge halves is aligned. If it's not, tap the headpin with the hammer to create a slight bend in hinge barrel. This will hold the pin in place. double glazing repairs near me can help you hold the doors while you remove hinge screws and hinges. Replace the hinges with ones that are of the same size, and attach the screws using glue. Finally fix the hinges using clamps or weights while the glue is drying.

After your hinges have been repaired, you should be able to put back the door and then reattach the handle. Replace the screws with wooden dowels of the same size as the original screw to ensure that they are compatible.

Broken or faulty glass

While uPVC windows do a great job of keeping cold out and the heat in, they are susceptible to becoming damaged over time. This can be the case with broken or damaged glass and faulty locks. If not taken care of, it can be a costly problem. It can also affect the appearance of your home and may lead to a loss of insulation, which is why it is essential to fix any damage as soon as possible.


If the glass is cracked but not shattered, you can usually fix it yourself with the proper tools and techniques. Make sure that the area around the broken glass is clear of debris so that any fragments don't cause injury or trip hazards. Remove the broken glass pieces and dispose of them in the appropriate manner. Then, put masking tape over the entire area to keep shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before adhering it to the wall is an ideal option when you have a window that has two panes. This will ensure you have enough space to finish your project.

Before applying the glue wipe the surface of the damaged frame and glass with a a dry, clean cloth. Follow the directions for application and curing which may differ from one product to the next. You may have to clamp the glass that has cracked using clamps that are lightweight and designed to support fragile materials, depending on the angle.

Once the adhesive has fully cure, carefully insert the glass in the window frame. Make sure it's flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful not to bend the glass when you reinstall it, as this could weaken the seal. This could lead to water infiltration or condensation.

If you have a glass door that's completely broken or has larger cracks, call a professional glazier such as O'Brien(r) to organise a replacement. It's important to act quickly when you notice broken glass.

Website: https://list.ly/lhjwn55