Notes

Are You Getting The Most Of Your Double Glazing Door Lock Repairs?
Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the window or door handles aren't aligned properly or are difficult to use.

It is crucial that your double glazed doors function smoothly, or else you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock for an affordable cost.

Snapped Key

It can be a hassle when a key snaps inside a lock. This can also be a security issue, as it may leave you vulnerable to an intruder if the door is not locked. Fortunately, there are some quick fixes you can use to solve the issue and get your door functioning properly once more.

The first step is to remain calm. If you panic and start poking around wildly, you might just end up pushing the damaged piece of the key deeper into the lock, which could make the situation even more difficult.

Then, spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also employ a screwdriver in order to break up any stuck pieces that could be blocking the way. If you have a chunk of the key stuck, grab it with a paperclip or another thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.


Some paperclips have grooved edges that could work in a pinch as hook extractors and some jigsaw blades are also suitable for this use. If you don't have one of these tools, you can bend a hook using needle-nosed pliers. Finally, you can use a pair tweezers to grab and pull out the last piece of broken keys.

If you are unable to remove the broken piece of key, use a lock deicer. It's available in many hardware stores and works by freezing any moisture that may be present in the lock.

If none of these strategies seem to be helping then it's probably time to call in a locksmith. Fitlocks experts can fix issues such as broken handles or broken keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are easier to use. You can schedule an appointment online for a double-glazing repair or contact us to discuss your requirements.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. To repair the cylinder, locksmiths must tap it. They can do this with a hammer or other tools, but the most effective way is to employ a long match or piece of wire. Then, place the match's tip or wire near the keyway. The locksmith can then hit the lock to crack it. This is better than using a hammer, which can harm the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder head and block are made of different metals such as cast-iron and aluminium. When the different metals heat up and cool down at different rates, it can create hotspots in the local area that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion is another possible cause of cracks in the cylinder. When the cylinder head and the cylinder block aren't properly maintained, it can lead to rusting or corrosion, which may cause them to expand at a higher rate than they should. As time passes, this may also lead to cracks.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety reasons. This issue could result from a defective locking mechanism or misalignment, as well as a worn-out handle.

It is a quick and affordable fix that the majority of double glazing owners can accomplish. A professional locksmith will usually solve the issue within one hour of arriving at the property. Based on your requirements, they can replace the locking mechanism, replace the window handles, or change the gearboxes. A professional locksmith will be able to provide you with a recommendation of the most cost-effective option for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which give you an extra security layer from burglars. It's a small price to pay for the security that comes with knowing your uPVC doors are safe.

double glazing near me 's not surprising that window handle locks may break. They have complex mechanisms that become less effective over time. It can be difficult to determine the reason for the problem and fix it correctly.

If the issue is with the internal locking mechanism or the latch, fixing your broken handle can improve your uPVC double glazing door's security as well as help you to stop draughts. Incorrectly repairing or replacing your handle can be costly and may harm the door's frame as well as lock and frame, so it's worth spending some time to do it correctly.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate, usually concealed by the cap of the screw for aesthetic purposes. You should not lose any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so that you can replace them when needed.

Then, turn the handle to make it 90 degrees to the window frame and loosen the screw at the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is loose, you can remove the handle and remove the broken spindle. Replace this with a new one, making sure it's the same size as the previous one (you can usually find these on the internet or at hardware stores) and screw it securely into place. Do not tighten the screw too much as this can damage the handle and the window frame.

Make sure the new handle is installed after which you can close and test the handle. It should operate smoothly, and you will be able open your window after a few times.

Be sure to double-check that your uPVC window is closing properly when you're working with the handle. If they don't then you may experience damp and draughts inside your home as and also affecting the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they close properly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These windows require a handle to operate an electronic locking mechanism within the window frame. The handle is attached to a centre rod that triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned, it's likely the spindle is broken. This can be a frustrating issue.

There are ways to fix this problem. A skilled locksmith can quickly and efficiently fix this problem. A professional locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel part that houses the spindle. This can be done without damage to the handle or window frame.

Once the wheel is removed, the technician will inspect the spindle to determine what caused it to break. This involves disassembling the spindle and examining each component part, noting any wear or damage. This process is typically performed in a clean, well-lit room by highly skilled technicians.

The next step is to clean the damaged spindle. This will help get rid of any dirt or other debris that could be hindering it from working normally. After that the spindle can be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. He will then drill holes that are identical to both pieces. This will ensure that the spindle fits perfectly with the handle.

If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers can sell generic replacements however if your window design is unique you'll have to speak with an expert in cabinet making or woodworking who can recreate the exact piece. After the spindle is installed, it is fixed to the handle. Place the screw holes on the handle to the existing screws in the frame. Once the handle is securely in place, you can use your uPVC windows.

My Website: https://www.metooo.co.uk/u/65e4e015177b1830a254073e