Notes

How To Survive Your Boss In Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation you'll need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

If you are going to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is substantial, you may want to use security screens that has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for an appropriate fit. If Full Survey satisfied with the fit of your window, tighten the screws to hold them in place.

If you can't reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close your window and do an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the house.


If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process, but it's easier to do when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also be disaligned as a result of wear, causing gaps where the sash and frame meet. This can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them realigned or replaced. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it is feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and there may come a point where it is more efficient to replace them than fix them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as possible.

Homepage: http://nagievonline.com/user/nylonoutput59/