Notes

Is Technology Making Double Glazing Door Lock Repairs Better Or Worse?
Double Glazing Door Lock Repairs


Have you noticed that your uPVC window or door mechanism deteriorated? Perhaps the handles on your uPVC windows or doors aren't aligned properly or are difficult to operate.

It's important that the double glazed doors work smoothly, otherwise you'll lose energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock at reasonable costs.

Snapped Key

It can be quite frustrating when a key snaps into a lock. This can also be a security risk, as it may expose you to burglars if your door does not lock. There are a few easy solutions you can use to resolve the issue and make your door functional again.

Be calm. If you get scared and start playing around with your keys you may end up pushing the damaged piece of the key even further into the lock, which could make the situation much worse.

Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slip out more easily. You can also use the screwdriver to break any pieces that are stuck. If you have a chunk of the key still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken piece of the key deeper into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If double glazing repairs don't have any of these handy, you can make use of needle-nose pliers to bend them and create a hook. Also, a pair tweezers is a good way to grasp and pull out the last piece of the key that was broken.

If you cannot remove the broken key piece then you can use a lock deicer. It is available in most hardware stores and works by freezing any moisture that may be present within the lock.

If none of these methods are working you, it's the time to contact locksmith. The experts at Fitlocks can quickly fix problems such as broken handles or broken keys with uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms so that they are more easy to operate. Request a repair for your double glazing with us online, or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder is an immediate security risk. A professional locksmith is able to repair the cylinder. To repair the cylinder, a locksmith will need to tap it. They can do this using an hammer or another tool, but the most efficient method is to use an extended match or piece of wire. Place the match or wire's end in the keyway. After this, the locksmith can strike the lock and break it open. This is far better than using a hammer that could damage the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block as well as the cylinder head are made from different metals, like cast iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion can be a reason for fractures in cylinders. If the head and block of a cylinder are not maintained properly they may be corroded or rust and cause them to expand more than expected. This could lead to cracks in the future.

If your uPVC door or window lock is brittle or requires an enormous amount of pressure to turn, this could be due to many things. A malfunctioning locking mechanism, misalignment or the wear of the handle are typical causes of this issue.

Fortunately it's a simple and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith will typically be able to resolve this problem within an hour after arriving at your residence. They can repair the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which offer an additional security layer from burglars. It is a small cost to enjoy the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks are complex mechanisms that wear out with time and usage, so it's no surprise they occasionally break. If yours is damaged, it can be difficult to pinpoint the cause of the issue and make sure that you repair it correctly.

If the issue is related to the locking mechanism inside or the latch, repairing your broken handle will increase your uPVC double glazing door's security and allow you stop draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It can also damage the frame and lock of your door.

With the window in the open position, loosen the screw that holds the handle with the screwdriver. The screw should be on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic purposes. You should not be able to replace any internal parts of the handle, such as the levers and plates on either side. Keep them in the same arrangement to make it easier to replace them if needed.

Then, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is free, you can pull the handle out and remove the broken spindle. Replace it with a new spindle, ensuring that it's the same length (you can purchase them online or at hardware stores). Securely screw it in the correct position. Be cautious not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is installed Close the window and test the handle. It should work smoothly, and you will be able to open your window once more.

Be sure to double-check that your uPVC window is closing properly when you're working with the handle. If they're not closing properly, you could experience damp and draughts inside your home as and also affecting the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is usually the case that the spindle in the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These types of windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is connected to a centre rod that in turn activates cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism is not able to open when the handle is turned, it is most likely the spindle has been damaged. This can be a frustrating issue.

There are ways to fix this issue. A reputable locksmith can quickly and effectively fix this issue. They can remove the window handle using a tool to remove the wheel component of the mechanism that is where the spindle is. This is done without causing any damage to the handle or causing other damage to the window frame.

After removing the wheel the technician can inspect the spindle and determine what caused it to break. This involves disassembling the spindle and examining each component part, noting any wear or damage. This procedure is usually carried out in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle, this helps eliminate any debris or dirt that might be hindering its normal function. After that the spindle could be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle cannot be repaired, it might require replacement. Home centres sell generic replacements. However, if the style of your window is rare then it will be necessary to contact a wood worker or cabinet maker who can make the exact part for you. Once the new spindle is in place it can be positioned to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the new handle is in place, you'll be able to operate your uPVC window.

My Website: https://community.windy.com/user/capdrill1