Notes

10 Quick Tips About Double Glazing Lock Repairs
Double Glazing Lock Repairs

The use of high-quality locks on your windows and doors helps to prevent burglars from accessing your home. They don't usually like to break glass or try to squeeze through windows.

Some double glazing owners, however, have encountered issues with their door or window lock after installing. These issues can usually be solved without the need to replace double glazing.

Broken or Faulty Locks

If your uPVC window or door lock is broken or faulty or has a problem, a locksmith will fix it for you. They can fix the striker plates, hinges and locks on your double glazing. They can also move the cylinder in order to correct any misalignment that may cause your handle to function properly.

If the key fits inside the lock but it won't turn or is difficult to insert then the mechanism may be locked up. This could be due to dirt or grime getting stuck in the mechanism. If mouse click the next webpage is the case, it might be possible to clean the lock and then lubricate it. Use a dry lubricant like graphite or Teflon and not oil, as oil can attract dirt, and cause it to stick to the inside of the mechanism. After lubricating the lock you need to insert the key and attempt to turn it. The lubricant must get into the mechanism, and the lock should spin easily.

A malfunctioning lock could be caused by loose screws inside the lock mechanism. They may loosen and fall out, or even break off completely, preventing the lock to perform as it should. A screwdriver is a tool to tighten these screws but care must be taken not to tighten them too much, as this can cause damage to internal components.

A faulty lock can be dangerous for both you and your family members especially if you have young children. It can be easy for them to open the door without you knowing and allow them access to your home. If you're worried that this might occur, a licensed professional locksmith can help you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair all types of faulty and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, meaning that in most cases, replacement windows and doors are not necessary.

Handles that are damaged or broken

Many double-glazed windows have the multi-point lock as part of the overall security package. This is a great option for those who are worried about opportunistic burglars trying to gain entry into their home. Ask your installer about antilift blocks. They can be installed alongside your existing locks and will help keep your windows firmly shut.


It's not uncommon for the handle locks to get damaged or even fail - they are the first part of your window that will be pushed open by a criminal intent on breaking in. Fortunately, the good news is that this is among the most simple parts to repair.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is offered as an option for new uPVC windows. As an alternative upgrade, older aluminium or uPVC handles that are no longer used can be upgraded to the shoot bolt locking system.

If a handle is damaged, it is essential to get the handle repaired as quickly as possible. Handles that are damaged can prevent the window from closing correctly and allow drafts in. It may also be a weak point that opportunistic burglars might exploit, putting your family and belongings at risk of being taken.

To repair the damaged mechanism, you must first gain access to the window frame, then take off the damaged handle. The gearbox that opens the handle is then accessed and the type identified, so that a replacement may be sourced which is in line with the profile of the internal window frame mechanisms.

After the mechanism is replaced, the handle may be put back together using the original screws. We recommend replacing them with larger screws as they will provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further deterioration. Once that's done the window will be functional again and at less than the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows do not close correctly, draughts may enter your home, the security barriers will become weaker and there's an increased chance of water damage or damp. Window hinges that break or fail are a common occurrence and are easily fixed.

If you have a window made of uPVC that isn't able to open or close, it's likely your hinges are damaged or broken and require replacement. While most window manufacturers require that you purchase a new window unit to fix this simple problem We can replace the hinges that are damaged and save you money.

Window hinges may break after repeated use, or they may be weakened through rust over time. If you've broken a window hinge, it is crucial to take the necessary precautions to avoid further damage. This includes not causing the window to open or close.

You can locate the appropriate parts for your hinge by identifying its type. The most common types of window hinges are Maco, Mila, Roto and a variety of other brands. It is recommended to consult an expert in this regard so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be a significant source of noise and also allow water infiltration that can cause damage to your windows.

To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If it's not then tap the headpin using a hammer in order to make a slight bend in the hinge barrel. This will help keep the pin in the right position. A friend can help you hold the doors as you remove hinge screws and hinges. Replace the hinges using those that are of the same size, and then attach the screws using glue. Finally put the hinges in place using weights or clamps while the glue sets.

Once you have repaired the hinges, you can put the door back in place. You can also attach the handle. It is recommended to replace the screws with the same length of dowels as the screw that was originally used so that they are in line with each the other.

Glass that is damaged or is damaged

uPVC Windows can be damaged in time, despite the fact they are excellent at keeping cold out and retaining heat. This can be the case with broken or damaged glass and faulty locks. If not taken care of, it can turn into a major expense. It can also detract from the aesthetics of your home and could lead to a loss of insulation, which is why it's crucial to repair any damage as soon as possible.

If your glass has broken but isn't shattered it is possible to fix it yourself with the proper tools and techniques. First, ensure that the area surrounding the glass is clean so that any shards won't cause injury to anyone or are an accident-prone area. Then, take any broken pieces and dispose of them in a safe manner. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window, it's best to pre-fit the pane of glass before gluing it back in place to ensure that you'll have enough space to finish the project.

Use a dry, clean cloth to wipe clean the glass's surface and the frame prior to applying the glue. Follow the curing and application instructions that differ from product-to-product. Based on the direction of the crack, you may want to secure the glass in place during curing. This can be done using lightweight clamps that are designed to hold fragile materials.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, ensuring it's flush with the edge of the frame and there are no gaps between the glass and the window sash. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This can lead to water infiltration or condensation.

If you have a glass door that's broken completely or has bigger cracks, call a professional glazier like O'Brien(r) to arrange a replacement. It's essential to act swiftly if you have broken glass.

My Website: http://sc.sie.gov.hk/TuniS/www.repairmywindowsanddoors.co.uk/waltononthames-windowrepair/