Notes

3 Ways That The Cut Car Key Influences Your Life
Car Key Cutting Explained

Car key cutting is a lot more than just shaping the metal. It is a complicated process that ensures security, functionality and long-term use of keys.

It is not uncommon to lose your car keys or have it break off in the lock. You'll need a replacement car key to ensure that you can drive your car at all times.

Transponder Keys

If your car was manufactured in the past 20 years, it is likely to have transponder chips. These microchips are tiny inside the handle of your key that send an electronic signal to the car's onboard computer when you use it. The computer on board reads the digital serial number inside the chip and allows the car to start if it's the correct one. This helps prevent theft of cars, as thieves would need to know your unique serial number to be able to take over it.

The microchip in your car key transmits an low-level radio signal to the receiver inside the car. This radio signal activates your microchip that then transmits the code to the onboard computer of the car. The car will only begin if it recognizes this code. This will stop the use of "hot wiring" and other methods of taking cars.

Locksmiths who provide these services can create keys for cars with chips. They can also be purchased at certain automotive stores, such as AutoZone. They have a huge variety of keys, and can assist you in finding the appropriate one for your car. They can assist you in programming the chip in your vehicle which is needed for the device to function.

Laser cut keys are more secure than flat keys. These keys feature a lock cylinder that is much more difficult to pick, and can only be duplicated using expensive laser key cutting machines or specially designed software. This type of technology is typically found in high-end vehicles, however it is now available in many affordable models of cars too.

The VATS (vehicle-anti-theft system), key is another kind of key that is difficult to duplicate. They contain a resistor that's black on the blade of the key. It can be programmed with one of fifteen possible values to stop it from starting a vehicle it's not intended to. These keys are more expensive to purchase and require a specific key programming machine that can only be found at a few locksmiths.

VATS Keys

Before transponder keys or cars that had computer chips built in to control the ignition, GM used a system known as VATS (Vehicle Anti-Theft System). VATS uses a key with a resistor embedded in it to confirm that the right key was used to start the car. The black VATS Pellet located in the middle of a VATS Key is not an electronic chip that is like those present on modern keys. It's just carbon or a block that is sized to hold an electrical resistance value.

GM employed 15 different resistance values for the VATS pellets. They attached the key's blade to ensure that, when the key is turned in the ignition the coded signal is transmitted to the module. If the signal matches the resistance value of the transistor in the VATS pellet, the relay in the starter circuit is activated and the engine starts to run. This does not make a car burglar-proof, but it can delay thieves for at least 15 to twenty minutes.

After discover here of use the VATS module could start to wear out. The two small wires in the ignition move each time the key is placed. As time passes, the wires may start to break. When enough wires are broken, the signal to the module is lost and it won't start the car.

You can solve this issue at home yourself by decoding your VATS code. You'll need a multimeter and a chart to find out the resistance value of your key, but it's not difficult at all. You can find the resistance value by putting one of the leads on the metal prongs on both sides of your key.

This is a great opportunity to test a new key and determine whether it will work in your car. Remove the key from the ignition first before you test it. In the event that it is not removed the key could have an incorrect VATS, and will not work in your vehicle.

Smart Key Fobs for Keys

Key fobs today can do more than unlock or start cars. They can also be an alarm system and a burglar deterrent, with a lot of them featuring advanced features that the owners might not even be aware of. They can remotely lock and unlock your doors, make chirping sounds to help you find your car in a parking space and even allow you to summon your vehicle by pressing a button on your smartphone. That's a lot more than you'd think of from a standard keychain remote. Smart key fobs are more expensive to replace due to their additional functions. They also have to be programmed by a dealer.

Some dealers will charge up to $100 for a single smart fob. It's a steep price for a product that is often tossed around in purses and pockets in the event that it gets damaged, dropped, or exposed to extreme temperatures and moisture. Fortunately certain automakers have come up with methods to shield smart key fobs from the most common kinds of electronic attacks, such as relay attacks. They are typically utilized in conjunction with remote-start hacks that allow thieves to gain access to your vehicle's settings through a fake signal from another nearby transmitter.

To secure a smart card, you can store it in a metal case or even an RFID blocking case. This will prevent the transmission of these signals. The convenience of this technology is compromised if have to remove your key fob each time you need to use it from the case.


Some of the newer policies such as auto club memberships as well as extended warranties will pay for replacing the fob or reimburse you if it gets lost. You can also avoid paying dealership fees by having your fob cloned at a locksmith or hardware retailer that provides key-fob cloning.

The decision of whether to buy a new fob is largely based on the importance of your car's keyless start and entry functions. It is always advisable to keep an extra key or fob on hand in the event that you lose yours. If you have to purchase a replacement, Batteries Plus has a large selection of fobs to fit most cars and trucks. Plus, we offer an easy, fast service that is approximately 50% less than what you'd buy from a dealership.

Traditional Keys

Traditional keys for cars are a single length of metal that has grooves cut into it to fit in a specific lock. They can open your locks and start your vehicle, provided that you haven't replaced them by the remote key or smart key. The only disadvantage of using the traditional car key is that you must physically insert it into the ignition to start the engine. If your traditional key is lost, broken or stolen, you'll need to visit a Gainesville locksmith to have a new one cut from the blank.

Depending on how much time has passed since the last time you cut your keys, there are several different options available for you to pick from when it comes to getting another copy made. Certain keys are cut using mechanical machines and others are laser-cut with security features that are enhanced.

Modern keys are equipped with advanced features such as encryption and anti-theft mechanisms. Encryption ensures that only the right key is used to start your car, making it more difficult for thieves to duplicate keys or pick locks. Other security features to prevent theft include transponder chips that are embedded into the keys to connect with your vehicle and allow it to only function when it's within a certain distance of your car.

If you decide to utilize a traditional key your locksmith can make the new key using the standard cutter machine that can be bought from most hardware stores. This is cheaper than using a key fob or a transponder key, and you'll still be able to use your doors, locks and trunk.

You can also replace your traditional car keys with a laser-cut version that has an unique pattern. These keys were first introduced in the early 1990s and are a popular choice for those who want to protect their automobiles. The majority of laser cut keys have special transponder chips that are designed to work only with the specific vehicle you own. If these chips are not present in your vehicle they will not respond to the signals sent by the key.

Read More: https://telegra.ph/10-Facts-About-Car-Key-Cutting-Manchester-That-Will-Instantly-Put-You-In-Good-Mood-03-09