Notes

The Ultimate Guide To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

You'll be wasting energy if your double-glazed doors don't work properly. This can also increase the chance of burglary. Owen the Locksmith can repair your door lock for a reasonable cost.

Snapped Key

It can be frustrating when a key snaps inside a lock. This can also be a security problem in that it can make you vulnerable to an intruder if the door does not lock. Fortunately, there are some quick fixes that you can attempt to fix the problem and get your door working properly again.

Be sure to remain calm. If you get scared and start playing around with your keys, you might just end up pushing the damaged piece of the key deeper into the lock, thereby making the situation even more difficult.

Spray WD-40, or another penetrating lubricant into the lock. This will help the broken piece to come out more easily. You can also use the screwdriver to break off any pieces that are stuck. If you're fortunate enough to have a bit of the key visible it, you can make use of a paperclip or other thin metal object to grab it and then pull it out. Both methods work well, but be careful not to push the damaged piece of the key even further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have any of these items then you can bend a hook using needle-nosed pliers. Additionally, a pair of tweezers is a good way to grasp and remove the remaining bit of the broken key.

If you are unable remove the broken piece of key, use a lock deicer. This is usually found in most hardware stores, and it is used to freeze any moisture or ice that might be inside the lock.

If none of these methods appear to be working then it's probably the time to contact a locksmith. Fitlocks experts can quickly fix issues such as broken handles or broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair through us online or give us a phone call to discuss your requirements.

Broken Cylinder


A damaged cylinder can pose an immediate security risk. A locksmith professional can repair the cylinder. Locksmiths will need to tap the cylinder in order to repair it. They can do this with an hammer or another tool, but the best way is to make use of a long match or piece of wire. Place the match or wire end near the keyway. The locksmith will then hit the lock to break it. This is much better than using a hammer that could cause damage to the lock.

The most common cause of cylinder head cracks is overheating. This can happen when the cylinder head and block are made of different metals like cast-iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localized hotspots to expand more quickly than the rest.

Corrosion is another possible reason for cracks in the cylinder. If the cylinder head as well as the block of the cylinder are not properly maintained, it can cause corrosion or rust, which may cause them to expand at a higher rate than they should. In time, this could also lead to cracks.

If your uPVC window or door lock is brittle and requires more pressure to turn it could be due to a variety of causes. This problem can be caused by a malfunctioning locking mechanism, or misalignment and also a worn out handle.

Fortunately it is a simple and inexpensive fix for most double glazing owners. A professional locksmith can usually solve this issue within an hour of arriving at your home. They can repair the locking mechanisms, or change the window handles and change the gearboxes based on your specific needs. A professional locksmith will always be able to advise you on the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which give you an extra security layer from burglars. This is a small price to pay for the security that comes from knowing your uPVC doors are safe.

Broken Handle

It's not surprising that window handle locks could break. They have intricate mechanisms that wear out over time. If yours fails, it can be difficult to determine the source of the issue and make sure that you repair it correctly.

Fixing the broken handle, whether it's an internal locking mechanism or latch can increase the security of your uPVC door and stop draughts. It could be costly to repair or replace your handle incorrectly and it can also damage the frame and lock of your door.

Screwdriver When the window is open remove the screw that holds the handle. The screw should be on the inside of the backplate, usually covered by the cap of the screw to enhance the appearance. It is not recommended to lose any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so that you can replace them again in the event of a need.

Then, rotate the handle to make it 90 degrees towards the window frame. Then, loosen the screw at the back of the handle which holds it to the internal spindle using a second screwdriver. Once the screw is removed, you should be able to pull the handle off and take out the broken spindle. Replace it with a brand new one, ensuring it's the same length as the old one (you can typically find these online or in hardware stores) and screw it securely into place. Be cautious not to overtighten as this could cause damage to the handle or the window frame.

Close the handle and test it. Hopefully, it will work smoothly and you'll be able open your window once more.

While you're working on the handle, be sure to ensure that your uPVC windows are shut properly. If they're not closing properly, you could experience damp or draughts inside your home. You could also compromise the energy efficiency of your home. Recommended Web page , like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is quite common that the spindle in the handle breaks, rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate an locking device within the window frame. The handle is connected to a central rod which triggers a set of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has broken, this can be an extremely frustrating issue.

There are solutions to this issue. A reputable locksmith can quickly and efficiently repair this problem. They can remove the window handle using a tool that removes the wheel portion of the mechanism that is where the spindle is. This is done without damage to the handle or the window frame.

After removing the wheel the technician can inspect the spindle to determine the reason for its break. This involves breaking down the spindle into its component components and carefully observing their general condition, as well as any specific areas of wear or damage. This procedure is typically performed by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this assists in removing any dirt or other debris that might be obstructing its normal function. After that, the spindle could be repaired or replaced. If it is being replaced the technician can take an identical dowel size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the spindle that is damaged is beyond repair, it could be required to replace it completely. Home centres sell generic substitutes however if your window design is unusual then you'll have to speak with an expert in cabinet making or woodworking who can replicate the exact piece. Once double glazing near me is in place it can be positioned to the handle by lining up the screw holes in the handle with the frames existing screws. Once the handle is in place, you can use your uPVC windows.

Website: https://notabug.org/peruspike2